MRCOOL DIY 18k BTU 20 SEER Ductless Heat Pump Split System 3rd Generation - Energy Star 230v (DIY-18-HP-230B)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is no need for the lines to be evacuated on the MR COOL DIY unit, since the line set comes pre-assembled Charged and sealed.
In fact, yes. Rather than have clips that hold the wires that control the inside unit, the power needs to connect directly to the wires. The connection is not like an outlet. There is some electrical acumen needed to do this, but if you have ever installed an electrical circuit, this will not be difficult at all.
If you could afford all the right fittings, sure, you could do that. No matter how much refrigerant your lines contain, the fact that MrCool forces you to buy a 25 foot line set has nothing to do with the lines being charged. That excuse also crossed my mind, but then I went and There is no line set in this line set. There is only one reason they do not sell a 12 foot line, and that is because they just do not If you return the 25 foot line, you won't be able to exchange it for the 16-foot one You have feet. The time period. You can have their 16-year-olds if you want You have to find a spot where you can park your 25-footer Then you should cut it off, or else you should throw
Powering it with a cord is feasible provided you use a heavy enough gauge wire and the plug it will plug into is a 20 amp one. If I wanted to use an extension cable for a plug, I would strip the female end off. Install the device in a weatherproof box covered with a lid. An example is an external power supply that plugs into the bottom.
Selected User Reviews For MRCOOL DIY 18k BTU 20 SEER Ductless Heat Pump Split System 3rd Generation - Energy Star 230v (DIY-18-HP-230B)
At the time of this writing (4/5/20), the unit has close to 400 hours, and it is operating To date, I have only used the unit to heat my home, but it seems to work well. The unit I purchased is a little undersized for the 1,200 square feet the house needs to be heated and cooled, but I was unable to install anything bigger because of where the blower unit has to be installed. All I have to do in the morning is light up my gas heater to warm up the house. However, only a portion of the features offered by the remote are available on the app. I wish they would add more features so you can benefit from everything the system has to offer. In the end, you will have to say that this system is quite an undertaking to install yourself, and therefore it is not advised for those that have never done any Consider watching a few YouTube videos to develop your comfort level regarding the steps involved, but be aware that some of the videos will show what you should not You can also access links to all the items you will need from the videos, which are all available on Amazon. **** This work should be done by two people to do it safely. As well as the MrCool product, I had to purchase the following items (These are the items I needed, but these may change depending on how you want to install it) * Note SIEMENS WN2060U does not have a power adapter The Sealproof Power Whip Assembly, 1/2-inch, with fused AC disconnection The PPC-D65 is a flexible liquid-tight nonmetallic conduit with a width of 12 inches and a length of 6 feet. Senville 20 Ft. 1575 Plastic Cable Clamp
Kit for Protecting Mini Split Air Conditioners with Decorative Line Set Covers This 5 1/2"
Outdoor Mounting Bracket is intended to fit Ductless Mini Split Air Conditioner Heat Pump Systems, universal, 9000-D16 *v* SNUG Fasteners (SNG499)*v* Bosch IMC16 1/2" Impact MultiConstruction Drill Bit*v* This is a 12 x 12 inch map. (This is necessary to drill your third hole. The hole should be 5" to allow you to slide all the way down)
-B Wire, Underground Feeder, and Direct Earth Burial Cable (100 ft cut) - DEWALT Hole Saw Mandrel, Quick Change, 1-Set 1/3 to 1/2 A 6-inch to a 12-inch Seventeenth of an inch, 7/16-inches The DEWALT Hole Saw, Bi-Directional (DW1803) has a 12" shank The metal is three sided The 1/2-way mark Here are the dimensions (D180056)
I hope this helps. Hope you have a great day! I think it's a great system if you take the initiative and you're willing to give it a try. A little practice swinging a hammer would be great!.
Invest in something meaningful instead of wasting A split) self-reflection A frantic telephone call from the neighbors at 11 a. m. was the result of the clock disintegrating after exactly four hours of use on day 1. The company phoned just after 30 pm to say that my brand new Mr. Cool HVAC was making a horrible noise and to be careful as it could start a fire. They had said I'd save thousands of dollars by getting one that works efficiently. The result has been that I wasted two days of my life on installing a completely worthless load of junk that I will now have to pay for a removal service to pick up. I have never bought anything on Amazon that was so bad. Observing life has taught me a lesson. Make use of a professional HVAC business and buy branded products. I would not recommend Mr Cool as it is like COVID You have 19 points!.
I received the shipment, but when I opened the packages, I realized that I had missed the 25-packets In feet before Multiple accessories were used in the installation of the charged lines. We tried to contact the seller and the manufacturer several times, including being on hold for over 3 hours, but we were never able to reach them. I'm missing major components of the system so I cannot give a thorough review of the product. As soon as a seller or manufacturer contacts me to solve the problem, I will update the review.
It was easy to install, quiet, and I could make calls to the customer support line. This unit was fairly simple to install because I have a fair amount of DIY experience. Don't attempt the task on your own if you lack skills. It was very easy to connect the precharged lines, and they were a game changer. Until now, the old 24000 btu window unit was very noisy. This new unit will replace that one. Quite a bit of noise comes from the split! There are times when I walk up to the exhaust to see if it is actually running since it is I did have one issue that I feel taints my experience and concerns me if I ever need repair parts again. My MrCool unit was not shipped with a condensate drain line. I had to leave a number to contact them. I did not receive a call back from them. It took me five days to get through, after which I kept calling. It didn't matter that this was a MrCool product, since I didn't receive a drain line, even when I pointed out that it was missing. Ingrams Air told me that it wasn't their fault, it was the Chinese who made the hose! They asked me to go to the distributor, Ingrams Air to get one. The person I called from Ingrams said they were doing their best to handle it as quickly as possible. Despite the fact that it's been four days, they still haven't The second time I called on Friday, I was told they would try again to ship it out same day. However, it didn't ship this time, so I found a replacement on Amazon and had it by Amazon is great. Thank you. Despite both companies having the same part in stock, the two companies could not even get the part from the manufacturer to the distributor within 11 days. In the event that I need repair parts in the near future, my immediate concern is what support will I receive. Despite the great product and great customer service and follow through, the customer service and follow through aren't ranked. In my opinion, this is not a good choice because of.
I have it in a 450 square foot area and it heats and cools it quite well. Setting it up was simple and took about an hour, with a little help from Only complaint I have is that it's not just two copper lines covered in cheap foam, which is stupid since this is supposed to be an outside line. It won't last very long in the elements and now I'll have to find You don't have to spend a lot of money to put a plastic 3mm sleeve over it.
A properly installed air conditioner only turns on or off after installation. Settings are not able to be adjusted. It is not possible to communicate with the indoor unit from the remote. Using a phone without a remote does not allow you to control it. After all day of installation and not even being able to use it, it is still not functional. Whenever you spend so much on an air conditioner, you should at least have a way to manually control it in case the remote malfunctions or for whatever reason.
Generally, if you do not have one already installed, you will need an electrician to install it for you.