SEI Furniture Lighted Corner Curio Cabinet, Golden Oak
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
This item was ordered, and a mirror had been cracked upon arrival. After calling the number in the assembly instructions, I received the mirror there very
There are many parts that come flat packed. To build a beautiful deck, you'll need a partner (or two). And you'll need patience, good music, and perhaps a glass of wine. Ours took two sessions, but we think it's worth the wait.
Oak is where it is.
MDF is used both on top and on bottom of the upper and lower section. Both doors and sides of the frame are constructed of The sides and shelves are all made of mirror or glass. On the bottom and top of the piece, there is minimal MDF and not much significance.
Selected User Reviews For SEI Furniture Lighted Corner Curio Cabinet, Golden Oak
Furthermore, I saw a comment on Facebook that stated the cams break easily, so I was extra cautious to make sure they weren't overtightened. After the box was opened and the first dish was placed in the cabinet, it took us about four hours to complete are complaints in some of the reviews that some of the pre-releases weren't as good as they claimed My Dewalt and I made sure that the drilled holes lined up, and I found a few that had been misaligned. Among the pros I had leftover screws and cams from the kit, so I had 1-2 of each left after I completed the project. There were clear instructions that made it easy for me to figure everything out on my own and a QR Code block that I believe could have taken me to a website for more information if it had been included If I had needed more detailed instructions, I could have had them. I am very pleased with the packaging, the glass and mirrors arrived in good condition and well-protected. This is how they look With its small footprint, it can fit into a corner with little to no floor space required. A disadvantage is Even though things did not always line up in machined precision, most of it was rectifiable by reworking A pilot hole is drilled to support the screw head. The cabinet is everything I was hoping for, and I ordered a second one to go in the other corner of the dining nook as well.
A corner shelf unit of this style would look beautiful in any room. I might be a little too heavy on the stars, but it is exactly what we have been looking for. This is a quality piece of furniture so I will give it five stars.
The construction was a challenge, but I have built pieces like this before, so it wasn't too bad. It was NOT a broken bone that I had Like someone else said, the problems seem to be fixed now. I had to work on it over three days, a few hours each day, mainly because I am getting too old for this. However, everything that went wrong was my fault I misread the instructions, grabbed the wrong screws, etc. Helpful hint make sure you have the right screws. Turn screw lock buttons are silver and have a small triangle, or arrow, stamped into the outer face of them so that they can be set to align with silver screw heads that the button needs The panels include There are a lot of labels on these. I suggest you watch out for There isn't a need to worry about them when they're in place, they will almost all be hidden once they're firmly it may be worth looking carefully at how this part was put together. on one of the glass shelves, where a "S" sticker requires more than a fingernail to apply. The shelf was installed so that the bit at the bottom right was the bottom left-I did the best I could. The portion of the building that is not visible is on the left side. The screws are They come in a very well marked "blister" pack, consisting of a white plastic sheet covered with about a dozen clear plastic blisters each holding a like-numbered part. If you are planning on opening each blister, please slice it open so that you can pour out all of the screws except for one, so that you can refer back to the numbered blisters and find the screw/part number that is applicable. There are many tiny antique screws here, and they come in TWO sizes as well, so if you pile them up like I did, it is not immediately obvious that they are TWO different sizes. In addition to leaving one of each part in its numbered blister, I also had at least one extra of each part, so it will not get lost in the assembly process. I only object to the lack of a light in the bottom section, though I observe that a light is present in the top section Another light fixture bracket was inserted into holes drilled for the other.
A curio cabinet is one of our favorite possessions. The gift I bought for my wife for her birthday is loved by her. There have been a lot of positive reviews on this cabinet and similar cabinets, which is why we decided to buy this. Assembling it was relatively simple and we had it together in a couple hours using The glass and mirrors had been a source of complaints, but we didn't experience any problems. We chose to replace the light with a halogen lamp to give the upper cabinet a little more light, and the halogen lamp also added some nice shine to the crystal. Some folks claimed that the unit is not very large in their reviews. For those who are unable to visualise things that well in their heads, I recommend marking out the dimensions posted of the item on the floor so you can see whether this is large enough in your mind.
There is a lack of precision in the drilling of the holes in the assembly instructions. It appears that the screw holes in the hinges are not angled correctly, as the flat head screws do not go in flat on them, and rest in an unbalanced angle, causing the screws on both sides of the hinge to hit one another, making the doors impossible to close Putting two of these together, I have to conclude that if this is a sign of Chinese quality control, we don't need to worry about their military capabilities.
There is very little wording in the instructions. Almost all of the images and diagrams are pictures. Although hard to figure out at first, it was easy enough to figure out in the end. I checked the hardware and found it to be fine. A problem I have would be how they package the abundance of screws and hardware in the box.
It is very difficult to access the components without damaging the whole box. It might be a good idea to do what other companies do. You can place the labeling for the hardware on the cardboard side, the perforations down the middle, and a flap for the buyer to use. So you won't have to spend a lot of time cutting through the hard plastic. ''It looks fantastic set up, and I love how my wife thinks it looks. ''.
Related Products For SEI Furniture Lighted Corner Curio Cabinet, Golden Oak
