Homend 110V Water Chiller Industrial Water Chiller 9L Capacity CW-3000 Thermolysis Type Industrial Water Cooling Chiller for 60W 80W Laser Engraving Machine

Homend 110V Water Chiller Industrial Water Chiller 9L Capacity CW-3000 Thermolysis Type Industrial Water Cooling Chiller for 60W 80W Laser Engraving Machine

$ 169.95

Score By Feature

Based on 91 ratings

Satisfaction

7.66

Value for money

8.15

Customer service

7.84

Packaging

7.75

OveReview Final Score

How Our Score Is Calculated

Product Description

If you would like to order the item, you should rest assured to order the CW-3000. CW-3000AG Chiller SpecificationCooling of a single 80W CO2 glass laser tube (emitting rate less than 60%) and for cooling a coil that has a maximum capacity of A power factor of 8 / 1 would be The spindle is cooled by a 5KW motor

Max. cooling capacity 50 watts per degree Celsius Flow rate 10 liters per minute Pumping height 10 meters

A thermolysis water cooler that uses less energy, has a long working life, and is simple to use, can be the perfect water cooling equipment on a tight budget

Featuring a professional forced air-cooled radiator, which is highly heat dissipating and not easy to block with an alarm output port, which protects sensitive components the moment they are damaged.

It is the most comprehensive reference to the radiator cooling system of international standards, and it is appropriate for small water cooling devices.

Questions & Answers

There is a use for which I am unusual. How well does this unit support keeping already cold water cold in a hot Would it be possible to slow down the global ?

There will be no cooling because this unit wishes to keep the water in the room temperature range. The water is cooled to ambient air temperature using no refrigeration system, it should be cooled to ambient air temperature at best by the radiator that returns the water to the input.

This can be used to cool my 5-inch computer monitor Can we fill five 5-gallon buckets with a quarter of a gallon ?

This is an issue on my mind, but I am only working with 2 5-foot tall people (10 gallons of water in five gallon buckets). If you end up buying this, let me know how it worked. Root rot is the bane of my existence, so please let me know if the purchase worked out.

Does this product have its own pump, or do you need to attach an external one?

There is one on the one I have

Is it possible to set the over temperature to less than 60 degrees Celsius?

After 6 hours of usage, I found it to be a good product The laser always produced about 80% of its power and the temperature was always below

Selected User Reviews For Homend 110V Water Chiller Industrial Water Chiller 9L Capacity CW-3000 Thermolysis Type Industrial Water Cooling Chiller for 60W 80W Laser Engraving Machine

The chiller does not work properly

4/5

If you need it in a climate-controlled environment, the 3000 does well. This is a radiator style cooler which will only cool water to ambient temperatures, so I dislike that they call it a chiller. Basically, if you are cooling water below room temperature, such as in a garage, garage shop, or warm/hot shop, then you will need to choose a 5000, 5200, or 5202 model that is actually an air-cooled In the 70F range you may use your laser/equipment Despite being less house, this should be sufficient to meet your needs.

Cesar Waller

| Dec 07, 2020

The quality of what you buy is determined by the price you pay

3/5

You can count on it to get the job done. There is a rough finish on the product, but I liked the packaging. While I am satisfied with it, I am not happy. If the tank is wet, it has either been used or tested. Based on the lack of dust on the fan, I would say it has been tested. When I experience any issues, I will update the review, but it seems like it will work well. The listing includes a list of pictures of the alarm schematics, but this is so limited that it is not sufficient.

Donovan Marks

| Jul 20, 2021

The laser should be kept This pump and bucket are for a CO2 laser I own, so I bought them to replace them

5/5

I am really impressed with this thermostat, as it keeps the laser at an optimum temperature for it. As of yet, I have not seen the cooling system go higher than 70°F.

Brylee Bruce

| Aug 03, 2020

A CNC machine was used to make it

4/5

Many others have also pointed out that the unit does not "chill" the water. The water simply gets cooled by a radiator to ambient temperatures. A bunch of adapters were provided by Home Depot, but I needed house adapters that were not provided with the unit.

Zaniyah SHARPE

| Dec 08, 2020

It is very inconsistent and does not cool

3/5

To begin with, there is no cooling ability of the machine. It is basically just a fan and a small radiator. When using it for a water cooled spindle, we receive temperatures of up to 34°C. There are times when the pump simply stops working and simply locks That's about all it has to offer.

Dalary Martinez

| Dec 23, 2020

Cools water but does not chill it

3/5

A product comes with great pumps for pumping water, but no chiller for cooling It did not chill the water in either unit when I tried it twice. Neither of the units I used had a chiller that kept water at a temperature above room temperature. The customer service was good, but they only offered refunds, and no one offered help with.

Dylan Levine

| Aug 12, 2020

The price is low, but the quality is poor

3/5

The pump and water bucket my hobby laser came with are way better than what it came The cooled system does not seem to cool much, the temperature slowly rises the longer the laser and printer run. I also noticed some particles in the system after using it Looking inside the fill cap, it appears that the tank is not smooth, as there are a lot of chips and flakes inside.