Cloudray S&A Industrial Water Chiller 110V CW3000DG Tank capacity 9L Small Laser Chiller For Cooling 60W/80WCO2 Engraving Cutting Machine
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Mineral oil cannot be handled by this device. It can be used with the following media In the absence of antifreeze, Teyu does not recommend you add alcohol to the chiller. Because ethanol is flammable, Teyu recommends the use of ethylene glycol, propylene glycol, or ethylene propylene glycol. Low temperature areas are those where the temperature falls below 0 A volume concentration of 9.0 is used in ethylene glycol antifreeze at 5°C. One percent can be used, and the ratio can be adjusted to about *br> *br>9 [10% ethylene glycol, 90% pure water] Low temperature areas are those where the temperature falls below 0 The use of ethylene glycol antifreeze with a volume concentration of 28% can be achieved at 15°C, and the ratio may be adjusted approximately to [30% ethylene glycol, 70% pure water] The following are the requirements of the chiller in terms of antifreeze performance This is *1/1. A stable chemical performance of the compound. Performance of the antifreeze is good In terms of low temperature viscosity, it is not too large 1. It is anti- Determination of corrosion and anticorrosion A list of rust properties 5. In rubber sealed conduits, swelling and corrosion are not an issue
In order to ensure that the water is piped as close to the source as possible, it must be not overly long, and it must be of a large diameter. If the flow of water is increased, it can be improved (*****)
If you want to use the chiller with glycol, you should set the temperature between 34 degrees and 34-38 degrees. If you don't want to use glycol, you should use the chiller with an upper or lower limit of 34 degrees or 34-38 degrees. There is a 38 degree difference.
An additional label can be found on the outlet of the chiller as well as the lower right corner of the front of the cooler. Several of our products have gained CE certifications and carry a one-year warranty The warranty lasts for a year. If you have questions, you can get in touch with us at any time.
Selected User Reviews For Cloudray S&A Industrial Water Chiller 110V CW3000DG Tank capacity 9L Small Laser Chiller For Cooling 60W/80WCO2 Engraving Cutting Machine
My purchase of the CW5200DH was made Two weeks after using it, it stopped working. I asked Amazon to replace it, but they wouldn't (no explanation, probably because their price had gone up $60) . In this case, Amazon allowed me to return it (the returns process is excellent with Amazon). The new one costs $60 more, so I have to spend an extra $60. Replace it with the same thing from a different Amazon seller, even though it costs $3 more. A price list for these services and products Even though chillers come from the same manufacture in China, there seems to be quite a bit of variability between them? It's cheaper on eBay, but you can't beat the return policy on Amazon.
It does what it advertises. My laser remains at a constant temperature that is safe to operate. She's not very nosy at all. Over the loud sound of the laser, the noise is not very noticeable. My experience with this product has been good for the past two months.
Even though it was confusing to get it set up, the software works great. We discovered that the clips were pretty cheap, so the leaks are gone! Since replacing the clips with heavy duty clips, no leaks have occurred.
With this purchase, I got a water cooling option for my orion motor tech 100w laser engraving machine. very easy to use you just need to connect the in/out feeds, fill with clean distilled water, and start it. In contrast to the water in a bucket with the water pump optional part that comes with the laser, this unit is marketed as being able to cool water and as a means to The reason I got it was that I display my laser engraver in my workshop, which can get did not want dust to end up entering the cooling system if the water was in a bucket with a pump, as I could not seal off the water, even with a pump. As I read in the reviews, water in a bucket would not be practical for large laser engraving runs with a laser engraver so I decided to upgrade to this product.
Related Products For Cloudray S&A Industrial Water Chiller 110V CW3000DG Tank capacity 9L Small Laser Chiller For Cooling 60W/80WCO2 Engraving Cutting Machine
