DeLonghi EC155M Manual Espresso Machine, Cappuccino Maker
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I also have an ec155 that is straining after three months. 5 years (with routine maintenance and de-scaling). When I saw this new version, I couldn't decide which version was superior. It uses the same 15-bap pump and stainless-steel boiler as the original. The knob appears to be the same on both of them. functions that are triggered The little arm that locks the filter in place when you tap out spent grounds appears to have been upgraded (it was previously plastic; now it's metal). Aside from that, it appears to be nearly identical.
You might be able to fit a 2 1/2-inch cup under there, but getting it out without spilling is difficult. I, on the other hand, remove the plate and replace it with a 3 inch tall cup, though you must be careful not to spill as you pull out the cup.
To catch the espresso shots, place the espresso cup(s) on the bottom plate. br>br>I just bought this DeLonghi EC155M (September 2017) and I'm very happy with it.
I noticed that the specifications state that this item is rated 11 out of 10. 4 x 9. 1 x 13. 8 inches. Do you know why this is happening?
Selected User Reviews For DeLonghi EC155M Manual Espresso Machine, Cappuccino Maker
If you're looking for a high-end espresso machine for a professional barista, you've come to the wrong place and will have to spend a lot more money. This machine is ideal for enjoying a cup of coffee in the comfort of your own home. br>After reading some of the lower-rated reviews, I was a little hesitant, but after conducting extensive research on several websites, I determined that this one had the most positive reviews for a home espresso machine in this price range. br>br>If you use too much ground coffee, the filter holder can be difficult to put on; simply press the grounds down tightly with the spoon or tamper. It does not have an auto shut-off feature; you must turn it off when the desired amount of espresso has been brewed. br>It vibrates while the espresso is being poured, so you must hold the cup. br>It only fits espresso/cappuccino-sized cups, which may be a problem for some customers but makes perfect sense to me (I can fit my favorite tea cups that are wider than tall). br>I read a few reviews where people complained about the coffee being too weak (perhaps it was the brand they were buying?). ) This has not been an issue for me; the espresso is very rich and flavorful, and I've tried three different brands of beans. Unless you position it on the edge of your counter to fit something larger, only a smaller frothing pitcher will fit beneath the steam tube. br>Overall, I am very pleased with my purchase of this machine, and I have used it every day, if not multiple times a day, since receiving it.
If you want to see the machine in action, I made a video for you. br>With a must-have stainless steel boiler and a 15-cup capacity, this espresso machine is a must-have. Pump pressure is measured in bar. While it has flaws, it consistently produces good espresso, which is the most important factor (in my opinion). Use a fine enough grind and tamp the mixture evenly. I can't get an even, fine grind with my basic blade grinder, and I don't like using my burr grinder because it's so difficult to clean, so I tried grinding in my Nutribullet with the blade meant for grinding grains/seeds on a whim, and it gave me a perfect fine, even grind, so that's what I'll use for this machine from now on. br>br>It's the best steam/froth wand I've ever used; They positioned it well, and it quickly froths/steams. They also provided a fixed plastic tamp that was well placed on the right side and out of the way. Although there is a slight lag between pulling the shots and being able to steam/froth (ready light), the machine heats up quickly. The standard ESE pods can also be used in this machine, making cleanup a breeze. br>br>For proper positioning, the filter holder handle must be pulled to the front, and it is extremely stiff and difficult to move. Because the machine is relatively light, you must twist it while holding it in place. It's a pain, and I'm hoping it will loosen up with time. The machine also vibrates quite a bit, which causes enough movement in shot glasses that you have to keep scooting them back into place. Because shot, double shot, and other actions do not have automatic timing, you must pay attention. You can only use very small cups; the cup tray should have been designed differently so that you could actually pull the piece all the way out to accommodate larger cups. I like to make a regular cup of coffee with foamy milk, so I pull a quad shot in my 4oz cappuccino mug, froth some milk/half and half, and pour it in. half in a different cup, then pour the espresso in. It tastes better than the morning pourover I usually have.
This machine has been in my possession for several months. If you read the instruction manual, it's very user-friendly and simple. For the five years that I worked as a barista, I only used automatic machines. This manual, in my opinion, produces far superior espresso. Definitely get something to take the edge off the espresso. Because this steam wand is low, I also purchased a smaller pitcher to stream milk. I use any shot glasses I have on hand and have never had a problem getting them to fit. I looked into a number of espresso machines before settling on this one, and I'm pleased with my choice. For a midrange espresso machine, this is without a doubt the best.
An earlier four-star review has been revised. My maker has only been with me for a month and it's already broken. br>br>A few weeks ago, the steaming wand began to leak on a regular basis, soaking my countertop. The filter holder would then no longer lock into place. They're going to replace it, so I'll see if it was just a bad unit. However, having multiple issues within a month is a major red flag. If you're considering purchasing this unit, here are some helpful hints:
1. To use, get a few small espresso cups. A 2 oz glass is almost too big to drink from. 2. br>br>1. br>br>br>br>br>br Invest in a tamper of your own. But don't overfill it with coffee. 3. br>br>4. br>br>5. br>br>6. Get yourself a good grinderbr>br>4. Invest in a small pitcher with a milk frother. 5. br>br> A knock box is a good investment. Scraping the grounds off is a pain, and if you bang it against a hard surface, the holders will dent.
I used to have a DeLonghi coffee/espresso maker, which I adored. When my Delonghi espresso machine broke, I figured a replacement would suffice. The ECM155M's motor makes a loud noise and vibrates when you turn the knob to begin the espresso flow. I'm not sure why a coffee machine would vibrate in the first place, let alone in such a violent manner. Otherwise, the machine will shake the container off the platform unless you use something heavy to catch the espresso or hold it. br>br>The espresso does not have a pleasant flavor. I tried adjusting the amount of water and using a different coffee, but it was still weak compared to my other machine. It doesn't taste good even when made with Italian Roast Espresso coffee. I don't grind my coffee beans; instead, I buy ground coffee. I'm not sure if this affects the coffee's quality, but it shouldn't. br>br>I don't recommend this machine and give it a thumbs down.