Max Professional Sub Zero Medical Freeze Spray - 10 Ounce Unit - Superior R152a Refrigerant
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Spray air was suggested by someone else. I also used spray air, but I simplified the process. I got a metal shot glass and used spray air to dispense upside down liquid into the metal cup, then dipped qtips into it and it'll freeze the skin tag/wart after a few tries; the finer the point on the qtip, the more precise the burn. I had to use this method twice with fairly long freezes to get rid of some stubborn hand warts, but only a few times to get rid of a wart on my upper thigh. Spray air is about ten times less expensive than any of these products, and its main ingredient is difluorethane, which is found in many freeze-off products.
SAVE YOURSELF TIME AT THE DOCTOR'S OFFICE. On a serious note, yes, and I do it whenever I come across one. Background information; I contracted HPV after sharing a glass with a family member who was infected. I developed plantar warts on my foot, which developed into two separate mosaic warts (Cluster of planters warts). The smaller one was about 1mm or 2mm in diameter, but the larger one was the size of a 25c quarter. (Seriously, it's difficult to find an image that large on Google.) I was walking on the side of that foot 24/7 due to pain and working a labor job, so I was worried about damaging my foot/ankle. I also got a filiform wart on my face, which are ugly little fucks. Starting with the face because it was the easiest to freeze due to the nature of that type of wart, pain wasn't too bad, but when you're doing it yourself you tend to hesitate, so it might be easier to get someone else to spray it because they won't feel the pain and won't stop until it's completely white and frozen, MAKE SURE not to stop when it's still dark purple or you'll have to go through it again. (On the outside, it is completely white and frosty.) It falls off 5 days later, it's painless after about 8 hours, and you probably won't even notice it. I had to have two treatments for the smaller mosaic wart on my foot because I couldn't bear the pain of freezing it completely, but the second time I grew a pair LOL. And the large one was just so big that it took a lot of effort to get it to freeze. As long as it's fully frozen, it SHOULD always be a single treatment! This tip needs to get out to as many people as possible; it's far too simple and inexpensive when compared to the minuscule wart kits that cost a fortune. compound W. *cough* *cough*
Hello,br> I'm sorry, but this isn't liquid nitrogen; instead, it's 1,1,1,2-carbon monoxide. Tetrafluoroethane is a type of tetrafluoroethane that has (A. Refrigerant (134a) is a type of refrigerant that is used to keep things cool
On the backs of my hands, I refer to them as age spots, and it has helped me with them. You must use extreme caution when using this product. To keep the spray off healthy skin, I've used contact paper with a hole the same size as the mole or wart.
Selected User Reviews For Max Professional Sub Zero Medical Freeze Spray - 10 Ounce Unit - Superior R152a Refrigerant
It helped me get rid of Seborrheic Keratoses on my face. br>I had a 2 inch wide and 1 inch thick SK, and I went to the dermatologist several times to get it treated. br>All they did was spray Liquid Nitrogen for a few seconds and charge $150. I returned to the clinic a second time, and this time only a very thin layer of skin was removed. br>If I needed to finish everything, I'd have to go to at least seven different places. 8 times. br>I was aware that mine was quite large and would have necessitated multiple treatments, but I didn't want to spend any more money. br>I googled and found a number of articles and reviews on the use of freeze spray in similar situations. br>I bought this spray and tried it, but it didn't work the first time (I used Qtips and sprayed on top of the Qtips before touching my Keratoses, but it wasn't cold enough. ) )br>I ordered a second bottle and used the same technique as the dermatologist (spray very quickly several times)br>1/5 second each for 10 times and it worked. This trick froze a thin layer of skin, causing it to darken in color and eventually peel away. br>Once my skin had healed, I repeated the process, adding a layer each time. br>It took 4 months to peel off all of the dead skin on my face and now I have no visible scars.
If you want to get rid of warts, keep the following in mind: This spray is produced at a pressure of - The temperature is 60 degrees Fahrenheit. LN2 (liquid nitrogen) is used by dermatologists at a temperature of -196°F. Temperature: 321°F LN2 freezes skin much more quickly than Medical Freeze Spray because it is much colder. I tried the Q tip method, but the Q tips warmed up too quickly to be effective, and Medical Freeze Spray was wasted as a result. Using Medical Freeze Spray and a plastic drinking straw as a mask, I was able to completely freeze the wart. I firmly pressed the end of the straw against the wart and sprayed the freeze spray into the straw until about an inch of liquid freeze spray was visible. I then waited for it to boil away for a minute. Because the straw kept the spray confined to the wart only, the skin was definitely frozen in a perfect circle, with no collateral damage. After about 8 hours, a blister appeared under the wart, but it was not nearly as large as when the doctor used LN2. I'll have to wait until it's all healed to see if I froze the skin deep enough to kill all of the warts. The advantage of using Medical Freeze Spray over LN2 is that it's safer to use because of the higher temperature. The disadvantage is that freezing skin to the same depth takes longer than it does with LN2. This is merely MY opinion, and I am not a medical professional. You should not attempt this unless you have done your homework and are confident in your ability to stay safe. There's a thin line between too little and too much, and you're dealing with your own living tissue. When working with such cold liquids, a lot can go wrong, so make sure you understand what you're doing and the potential consequences of any mistakes.
I used this medical freeze spray to remove several skin tags from my body, and it was successful. It took several weeks of multiple applications, but it worked and saved me money and trips to the doctor. A previous reviewer suggested cutting a piece of a straw down and spraying through it to concentrate the freeze on a specific area, which I found to be a good suggestion. Even with the black pinpoint applicator tube in place, it sprayed outside of the intended target zone, which helped keep it in the right place. I also used it to treat a dry spot on my nose, which I did by spraying a Q-tip. tip and then dabbed the affected area quickly, which also worked. This is something I would recommend and purchase again if the need arises.
I wrote a negative review in the past and would like to update it. I didn't believe it was working at first, but as I continued to use the product, my skin tags began to react and fall off. When I first used it, I got some burns, but I tried the q tip method and it worked much better. If you're not persistent, you'll be able to pinpoint the spray.
I'm glad I read the negative reviews or points against this product because while it does work, the application process could be tweaked a little to avoid inflicting yourself with a larger affected area than necessary. My first attempt was a flop; the product ran down my arm, turning a pinhead-sized blemish into a silver-dollar-sized wound. (It will heal) The trick is to keep the chemical inside on the blemish and away from perfectly healthy skin by using a straw as a guide. Use caution, apply in small bursts, allow to dry, and reapply several times in a session, depending on the thickness of the blemish. This will ensure that you get a nice, even coverage every time, and I recommend wearing gloves as an added layer of protection. Always conduct research to achieve the best possible result; I'm glad I did.
I was a little disappointed because I was used to the dermatologist using liquid nitrogen and treating the (wart, mole, or whatever) spot right away. It's not too bad if you zap the spot a few times a day for three days. Make the best decisions possible. Check the location on a regular basis. It's possible that you'll want to take a day off between zaps. It's normal to get a blister, so don't be alarmed. After the blister has healed, your spot should fall off in about a week to ten days. Best wishes to you.
The age spots on my legs were frozen using this product. I cut a straw to fit over each age spot, as suggested by another user. With a few quick bursts of the applicator, the spots were frozen. Because I tried to rub the brown spot away, the spots swelled and became infected. This was excruciatingly painful, and I'm not sure if I'll be scarred as a result. I wish I hadn't done it in the first place. Visit a dermatologist and spend the money.
I bought this product to freeze off skin tags that I'd wanted to get rid of for four years but didn't want to pay an exorbitant amount to have them removed by a dermatologist. This product was easy to use and effective, though it took a few weeks for the skin tags to fall off after application. Overall, the product was exactly what I had hoped for! This is a great option for anyone looking for a low-cost way to get rid of skin tags!.
Related Products For Max Professional Sub Zero Medical Freeze Spray - 10 Ounce Unit - Superior R152a Refrigerant
