Thermalright Odyssey Thermal Pad 12.8 W/mK, 120x120x1mm, Heat Resistance, High-Temperature Resistance, Non-Conductive, Silicone Thermal Pads for Laptop Heatsink/GPU/CPU/LED/Gelid/PS4(120x120x1mm)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The heatsink and the board make a big difference here. There are two sizes I use, one is 1mm and one is I have a gpu that measures 5mm. In some cases the memory is affected, while in others it is not. You can find out what thickness you need by researching your particular card in detail or watching a teardown video.
A choice of 120x120x0 is available. There are three or one of the following 5mm 120x120x1mm 120x120x2mm
The latest launch from Thermalright is the 5mm
Selected User Reviews For Thermalright Odyssey Thermal Pad 12.8 W/mK, 120x120x1mm, Heat Resistance, High-Temperature Resistance, Non-Conductive, Silicone Thermal Pads for Laptop Heatsink/GPU/CPU/LED/Gelid/PS4(120x120x1mm)
My 3090 founders edition's memory module temperatures are reduced by 14 degrees by using these coolers.
My experience was not good, I followed the instructions well, but the thermal pads ripped fairly The product was also wet when it arrived. The only thing I need to do is gain one degree in performance. There may have been an issue with the series, or the fact that the product is wet, rendered it useless for me. dry party, but all I felt was negative effects for my rtx 3090, I strongly recommend against this product for gpu, you will pay dearly for less.
I lowered the memory temperatures by 8C by fixing the bad thermal paste sizing and placement on a factory overclocked 5700.
If you want to replace your existing ones, I highly recommend.
This is good. A temperature drop of approximately 5°C is expected.
In my P870TM1, I noticed that my VRMs were running a bit hot (HOT). Previously, I had been pushing my 9900ks to 4GHz for gaming, but now I have it pushed up to 5GHz. The 5GHz band. They were old and dry by this point too, adding insult to injury. The stock pads were a bit too thick and much less conductive. My first attempt was at sizing at 1, which ended up being the final one. A thickness of 0mm and a thickness of 2mm As the pads were not oversized, they provided an even tighter CPU heatsink pairing. I was able to drop my VRM temperatures by over 10C with the Thermalright 12 thermal pads, which has replaced numerous stock thermal pads on various devices. We have seen temperature drops across the board (some more than others) over the past eight months with the 8 W/mK pads from NVMe to VRM. It is only the Fujipoly 17 that has been able to surpass these pads. The pads are less adhesive and stiffer than the 3 W/mK pads, so they won't bend when pressure is applied.
5/5.
Buying this thermal pad is a great idea to replace your old, cheap one Video card components or M are too often supplied with the low-performance ones. Drive enclosures for two drives. I think there are 12 of them. As a result of its 8 W/mK thermal conductivity, this is one of the best thermal pads. Its thermal conductivity even compares well with thermal grease. Regular scissors can easily be used to cut out the desired size from this pad, which is very flexible. As soon as I applied this pad to my video card's memory chips, I noticed a decrease in temperature. Keeping in mind that it is a high-performance machine is just one consideration to keep in mind This pad has a higher density than the typical low-density pad, so it doesn't compress as quickly It is very common for grade pads to be It is important that you order this pad in the appropriate thickness for your application, as an over-thick pad will not perform as well as one that is under-thick Using a thick pad may add bulk to your heatsink or even cause it to not seat To put it another way, measure the actual gap between components rather than the thickness of its The bottom line is that if your NVMe drives or video card's RAM and power components are overheating, you should definitely try one of these thermal pads (assuming the rest of your cooling solution is working well). This is a highly recommended read.
Pad of 0 mm thick, 120 x 120 mm, cut to fit heatsink material. There are a number of computers on which I have NVMe 2280 SSDs. In order to enhance the heat transfer to the covers, whether I used an independent external 2280 holder or one plugged directly into my motherboard, heatsink material is required. This is a very good material for The adhesive is not very strong, so it is better. It would have been much better if I could cut it to size or add more than one layer. Additionally, the seller may offer pre-cut heatsink material and thin sheets of heatsink material. There is a possibility that it would be a better value. *Recommended* This SnowBabe Store Thermalright Odyssey Thermal Pad 12 is very comfortable and effective. A heat resistance rating of 8 W/mK, 120x120x1mm, high-powered A non-thermal heat resistant material Thermal pads for laptop heatsinks, GPUs, CPUs, LEDs, gaming consoles and PS4s that are conductive, silicone (120x120x1mm). The stuff is great, but it's very expensive. It is my sincere hope that these facts and my review have been useful to you.
Related Products For Thermalright Odyssey Thermal Pad 12.8 W/mK, 120x120x1mm, Heat Resistance, High-Temperature Resistance, Non-Conductive, Silicone Thermal Pads for Laptop Heatsink/GPU/CPU/LED/Gelid/PS4(120x120x1mm)
