ePhotoinc RL01 DSLR Rig Movie Kit Shoulder Rig Mount Video Camcorder Camera DV DSLR Cameras
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Although I have never held a T2i or had the opportunity to see one, I am sure this mount will work for every Your camera should be fine if it has a bottom that can be screwed into a tripod or another piece of equipment.
It works with my 50D and the larger Panasonic DVX100B without a problem, I use it exclusively with my larger Panasonic camera
If you have a camera, you can use it
I doubt there is an external battery attached, but the handles do have connector ports on the ends. Almost anything that has a male screw can be bolted on, whether it is an external mic, screen, or light. However, the downside of this cost friendly item is that in some setups such as the brief case set up, the screws holding the handles in place are not The joints will loosen if there is a lot of weight on the mount. There should not be too much loosening, just where the handles become loose if they are not repaired. This is a fantastic item for beginning film makers. You can move the camera with far more freedom than if you were using a handheld device.
Selected User Reviews For ePhotoinc RL01 DSLR Rig Movie Kit Shoulder Rig Mount Video Camcorder Camera DV DSLR Cameras
This tool is easy to use and able to be shaped to suit any need. My Canon t3i DSLR is compatible with this adapter, and it allows me both to stabilize my video footage as well as get angles that would not otherwise be possible or comfortable. In majority of my usage, I use it as a shoulder rig, but it can also be used with a cage to shoot low to the ground or in pretty much any other configuration you can think of. This site has females between the ages of 20 and 30 It is equipped with 1/4 connections, which are standard tripod screw sizes, so a variety of external tools may be connected, including LED lights, external flashes, etc. I'd only say the only con is that the arms do not get perfectly tightened due to the screws that tighten them in some places. In other words, the joints have a little bit of give. It might be possible to fix it if you replaced them with better parts, but I haven't had to do it so far. All in all, I would suggest it as a helpful tool for videographers at a fairly low cost.
I never will. But now things are different thanks to this rig. I was shooting an expo in New York City. That's why I needed it - it's quite run and gun - The item literally broke in half within the first hour of use! It's a set of pieces that can't be merged. Just recently, it stopped working. That aside, the screws are not that tight, so the rig itself does not seem During the shifting, the handles seem to If I had been told that it would break in an hour, I would have given it a few more stars, but it must have poor quality to be less It disappointed me so much, as I was so excited to purchase it.
Since I'm in the process of creating a short film, I'm on a restricted There is a catch, however you get what you pay for when you buy this product. In order to get really strange angles for pictures, I needed something to stabilize my camera while I was walking. I've tried it, and it works perfectly! While traveling, I greatly appreciate how compact and neat it can become when folded in. I did, however, discover that a chunk of the foam handle was missing when I first received it. The other problem is that one of the screws came off after just two weeks of use, leaving me with half of it. My friend provided me with a replacement screw for the tail part, and I wrote it off until I had a working tail again. There is no doubt that it performs the job, and I do recommend it for anyone who wants to stabilize their video. I'm not embarrassed to carry it around when I'm shooting in public, but make sure you keep an extra screw on hand in case it gets lost.
You need this rig in your collection! There are plenty of units in this price range. Many cost more than $100, if not more than $200. I feel confident in how well it is constructed and that it can support my fairly old / heavy DSLR. When people see it on me with it, they always ask where I got it and how much it was. I definitely rate this as one of the best finds I have made on Amazon. Due to how easy it is to loosen the twist tighteners on the end, I rated it 4 stars. My new camera has lock nuts. Since I video and photograph auto racing, I have to change it up very quickly whenever it gets hot. Firstly, set up the shoulder mount, and then move on to the single handle for low angle Although the wing nuts on each end are quick to remove, if you are not paying attention, they can come off. There needs to be a locking point that prevents the nut from falling out, which I shouldn't give it four stars because I am an idiot and lost two so far. As a result, it is cheap, so I don't know what the problem is. Its price, not its quality, that I mean by cheap. This is a well-built product that is worth every penny.
The fact that it could get so small surprised me. It was inevitable that it would get compact, however not as compact as this. I can easily fit it in a camera bag or any small place. It is a highly recommended product for anybody looking for a cheap, effective, convenient way to clean their clothes There are alternative rigs available for less than $400. I hope you have a great time!.
I got it because I am in love with It would be great if I could make YouTube videos someday. The case holds my Canon T8i/850D digital camera along with a monitor and microphone without issue. In the photo, the microphone is unplugged. It has a too short cord. I will need to purchase a longer cable. Although this isn't as stable as I would have liked, it's The fact that it folds makes it easy to store. I'm not too keen on having to keep up with the Allen keys to tighten the rig, but I'll get over it. . . lol.
How could something so cheap do so many different things and be combined in so many different ways? In addition to the low price, this rig raised flags as it was more than half the price of other high quality rigs. Despite some hype, I wouldn't go to the extent of saying this is an amazing product. It is one major flaw that it does not hold all the time. I have found that some positions cause my camera to sink. Only the very smallest of digital cameras are able to support weight. Second, the whole thing has a very cheap feel to it. The arms tend to twist and did not fully lock into place while using it. Whenever I tighten them, I feel as if I will break them. I find there are more positives than negatives to the situation. As far as the price is concerned, this is a great rig for someone just starting out. You can find a wide variety of jobs there that are affordable. It is a good product, so I recommend it.