GE Digital 2-Way Coaxial Cable Splitter, 2.5 GHz 5-2500 MHz, RG6 Compatible, Works with HD TV, Satellite, High Speed Internet, Amplifier, Antenna, Gold Plated Connectors, Corrosion Resistant, 33526
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
To inquire about the four-digit code, please click here To avoid violating the law of conservation of energy, it would have to be at least 7 decibels. When 0 dB is lost, we expect a 50% reduction, or two dB loss Splitters should be between 3 dB and 5 Four out of five There is only one way that has It would put out more power than is being received with a 5 dB loss per port. An increase of 7dB represents a loss of a factor of four.
I appreciate you asking me a question, Chriswlan. A diode protects each port on the OUT side. For any further questions, please do not hesitate to contact us between 7 a.m. and 10 p.m. or give us a call at The hours are 800 am - 1000 am The Central Standard Time zone begins at 100 pm on Monday through Friday Call 800-466- I am 654-654 My sincere thanks go out to
Which devices do you use to connect If you want to connect a TV and computer directly to an extender, you will have to connect the extender to a splitter first.
In my receiver, there are diodes at every output port that prevent unwanted DC crossover from another output port. *br>For this reason, it now does not require a dc-to-ac converter. The blocking of capacitors on televisions would generate an additional 1 db This is a neat
Selected User Reviews For GE Digital 2-Way Coaxial Cable Splitter, 2.5 GHz 5-2500 MHz, RG6 Compatible, Works with HD TV, Satellite, High Speed Internet, Amplifier, Antenna, Gold Plated Connectors, Corrosion Resistant, 33526
This is what many people these days are doing. With the help of streaming services and an OTA antenna, I plan on cutting cord with cable and satellite. It came as a surprise to me. In the attic, I found a beautiful, large antenna that was installed by the It was mentioned that I could use the satellite wiring for this purpose that has already been installed. All the satellite cables were unplugged from the dish and I hooked up my RG6 on that green There was indeed a signal received by the televisions. There is significant pixelation in the runs because they are so long. I tried an amplifier and it made things Ultimately, after lots of trial and error, I found out that it was the splitter that I was having problems with. It is a ge branded one that I ordered and had it all set It has now been corrected. Even at 25 miles from towers, that attic antenna is able to pick up full signal strengths on almost all The splitter has a very low loss rate in comparison with other splitters. An amplifier or positioning of the antenna does not need to be done since it is actually installed backwards in the attic. However, it seems to work. The GE splitter is so simple and so cute.
It was NOT what it was described as! The most common antenna installations that have a remote amplifier at the antenna cannot use this technique. Despite the fact that this splitter is marked as passing power to all ports, the majority of users with antenna mounted amplifiers do NOT have that configuration. The center conductor of your coax going to the antenna has to be charged with a positive voltage to operate a majority of amplifiers. From what I can tell, the splitters have a diode that only allows a NEGATIVE voltage to pass from the input to either of the outputs. Since the diodes are arranged in back-to-back arrangement, it is impossible to transmit positive voltage from either of the input ports to either of the output ports, or from any of the output ports to any other output port Back to you. A lot of these are rejects or have been designed for other purposes than being a In case you have to pass a positive voltage on the center conductor of your coax, then buy something else instead of dealing with hours of troubleshooting.
I am now watching cable TV. For the last six months or so, I've been hearing and seeing video and audio glitches on my cable TV service. It's been ten years since I have used the service. A friend of mine told me that an older video splitter could be to blame for the problem. It seems that the electrical properties or resistance of the device can change over time. Moisture in the air can also affect the device. Anyway, I replaced my 10 year old splitter, and the issue has been fixed completely.
I recommend this splitter if you want to split your coax into two channels for the use of two modems from one cable port! Due to the nature of her work from home job, my wife is required to use internet service and modem provided by her employer, but also needs our personal internet which happens to be provided by The splitter works perfectly to allow us to use two different modems at the one coax jack we have in the house with no problems or speed loss. Using this splitter I have no loss of speed with our 300Mbps line!.
I've had it outside for over a month now in Florida rain season and it has not failed me. There are a lot of products available for a reasonably low price. A quick update We have had this thing on our porch for 6 months now and it still delivers solid As a former professional cable installer, I know these things can either fail right out of the box or failing after continuous exposure to extreme sunlight and wind-driven rains however, this one has passed all tests and been cleared for outdoor use, except in freezing temperatures.
The following four sentences will help you Many other coaxial splitters cannot compare with the performance of the Way Coaxial Splitter. It is very rare for there to be any internal signal losses. There is the inevitable loss of input power when divided into four outputs.
However, I was pleasantly surprised to find that the internal losses were sufficiently low to power four TVs and provide signals for over sixty Because of the length of the cable runs of RG6, I expected a booster amplifier to be needed. To get from my antenna to the central wiring closet, I have 75 feet of cable to get from the central wiring closet to the farthest TV, I have up to 85 feet of cable. On the TV halfway across the globe (from Amazon), there is a TiVo Bolt and all channels are received with no pixelation. The last time I cut my hair was several weeks ago In the - The splitter works for our OTT video services, as well as several local channels that are not on any OTT service. We connected the Roku (from Amazon) on a cableline for several services but also wanted some local channels that are not on any OTT service.
I was having some trouble with a splitter that I think was designed for FM radios, and this fixed the problem. Having a TV in 4K is a big deal to me. Clearer and more vivid colors are present in the picture. The author is Using the splitter for some time, I noticed that I was not getting some OTA channels clearly enough and that they would freeze and get pixelized. In particular, I was interested in receiving the weather channel, which was coming in very weak compared to other weak stations I was not particularly interested in. After switching to an Extreme splitter, which was advertised as only having three ports, I was amazed that it had three. The weather channel was able to be picked up despite the loss of 5db per channel (this has a 6db loss).