GE Digital 2-Way Coaxial Cable Splitter, 4 Pack, 2.5 GHz 5-2500 MHz, RG6 Compatible, Works with HD TV, Satellite, Internet, Amplifier, Antenna, Gold Plated Connectors, Corrosion Resistant, 55288
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
To find out more about the four-month program This would violate the law of conservation of energy if the sound level were less than 7 dB. If there is no loss at all, then a two-dB loss would be 50% It is ideal if the way splitter is within three decibels. Four out of five There are only 3 ways to do it. An increase of 5 dB per port would require more external power coming in than going out. Loss of 7dB is equivalent to a loss of four factors.
Dear Chriswlan, thank you so much for asking. It is true that all OUTs are protected by diodes. You are welcome to respond or call us between the hours of 7 am and 7 pm if you have any more questions. The hours are 800 AM – 900 AM The time zone change from 600 PM Central Time to 100 PM Central Time is Monday through Friday. Dial 888- It is 654-554 It has been a pleasure working with
Connected to the extender, what are you doing? A TV and computer must be connected directly to the extender. After that, the extender must be connected to a splitter, where it can be connected to the television and computer.
In my case, there are diodes at each output port to block unwanted dc crossover from another output port. *br>This eliminates the need for dc-to-dc converters. A block is needed for the TV capacitors, which would add 1 dB This is a nice
Selected User Reviews For GE Digital 2-Way Coaxial Cable Splitter, 4 Pack, 2.5 GHz 5-2500 MHz, RG6 Compatible, Works with HD TV, Satellite, Internet, Amplifier, Antenna, Gold Plated Connectors, Corrosion Resistant, 55288
This is the case for many today. As a result, I'm cutting the cord with cable/satellite and switching to streaming services and OTA antennas. I was surprised at what I found out. From the previous owners, an attic antenna with an antennae of a lovely design was installed. There is already satellite wiring installed for the OTA signal, so I could use it for the satellite Using that green 4 way splitter, I disconnected all the satellite wires from the dish and connected my RG6 to it. There was indeed a signal that made its way to the television sets. I unfortunately got significant pixelation in the runs because they are so long. Despite trying an amplifier, it only made things A long story short, I discovered the splitter was causing my problems after a lot of trial and error. This one is a ge brand, and I hooked it up all. Now everything is in order. There are almost no channels that do not have full signal strength from that attic antenna even when I am 25 miles from the towers. There are few other splitters that are as low loss as this one. Fortunately, the antenna is installed beautifully in the attic completely backwards, so there is no need to move it or use an amplifier. It works, so all is not lost. It's so nice to have a splitter as simple as this one from Ge.
This item is nothing like what was described. Most antenna installations that have a remote amplifier at the antenna do not work with this method. While this splitter is marked as passing power to all ports, this is NOT true for most users that have amplifiers attached to their antennas. In order to operate most amplifiers, you will usually need to apply a positive voltage to the center conductor of your coax. There seems to be a diode on the splitter that isolates the input from either of the output ports so that only a negative voltage can pass through them. Due to the diodes' arrangement, it is not possible to pass a positive voltage from either of the input ports to any of the output ports, or from any output port to any other output port. Back to you. There are either rejects or amplifiers had been designed for a specific application besides that of an Buying something else and avoiding hours of troubleshooting will keep you from having to pass a positive voltage through the center conductor of your coaxial cable.
For the past six months or so, my cable tv service has been experiencing more and more video and audio problems. Having this service since 10 years is invaluable to me. It was suggested to me by a friend that a video splitter, as it gets older, might cause this problem. Anyway, I replaced my 10 year old splitter, and the problem has been resolved. My theory is that the electrical properties or resistance change over time. Moisture in the air can affect it as well. Anyway, I've found out that my 10 year old splitter had an electrical problem.
This is the right splitter if you want to split your Coax cable into two to use with 2 modems from one jack! Our family uses the same internet provider for both our home and work Internet needs. My wife's home job requires her to use company-provided internet service and modem. Meanwhile, my daughter uses our personal internet and our business internet. Our only coaxial jack in the house is in the bathroom so this splitter works perfectly to allow us to use two different modems without any problems and without sacrificing speed! There has been no loss of speed with this splitter even with 300mbps!.
I have had it outside in Florida rain season for over a month and it has never failed me. The company offers a lot of products for a small price. A brief update The device has been mounted outside for six months, and it is still providing strong signals. Even though these things can fail right out of the box, or after continuous hard weather of bright sunlight or wind driven rain, this one has lasted this long in all of those conditions, it has passed the ultimate test for outdoor use except for freezing temperatures,.
The following four steps should help Many other coaxial splitters do not perform as well as Way Coaxial Splitter. It is unlikely that there will be any internal signal losses. As a result of dividing the input power into four outputs, there are losses. However, I was pleasantly surprised that the internal losses were still low enough to power four TVs and provide signals for over 60 OTA channels from a single attic antenna. As I expected, there would be a requirement for a booster amplifier due to the long cable runs for the RG6 cable. The distance from my antenna to the wiring closet is 75 feet and the distance from the wiring closet to my farthest TV is up to 85 feet. On the TV in the farthest corner there is a TiVo Bolt (from Amazon) that receives all channels with no pixelation. As recently as a few days ago, I was able to cut- Here's the review With the Roku (from Amazon) we can watch several OTT video services, but we also wanted to watch local channels that are not available on any OTT service. See how this splitter works.
Using this solved my problem with a splitter meant for FM radio. I was having problems with an old splitter designed for a video projector. In order to upgrade to a 4K TV, I first switched to a 1080p television. Compared to the original picture, this one is clearer and has I. *br /> In the process of using this splitter for some time, I noticed the OTA channels did not always receive clear images and were pixelated or frozen. It was especially interesting to be able to pick up the Weather Channel, which was much stronger than other weak stations I wasn't particularly interested in hearing. After switching to an Extreme splitter that advertised a three-port connection, I had to sacrifice some performance. I was able to pick up the weather channel despite the 5 Db loss per channel (This one had a 6db loss).
Related Products For GE Digital 2-Way Coaxial Cable Splitter, 4 Pack, 2.5 GHz 5-2500 MHz, RG6 Compatible, Works with HD TV, Satellite, Internet, Amplifier, Antenna, Gold Plated Connectors, Corrosion Resistant, 55288
