Record Doctor VI – High-Performance Vinyl Record Washing Cleaning Machine (Carbon Fiber)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
When I went to buy it, I had the same question. br>br>I have about 150 records, all of which are in various states of cleanliness. With the purchase of a new turntable, I set out to clean them all. br>br>A friend of mine has the older $200 version, which I used for about 30 LPs before it overheated and required a few hours to cool down. br>br>Because I was eager to get my hands on the newer model, the shipping timeframe played a big role in deciding whether to go with the 200 or 300. Despite Covid's delays, it arrived quickly, and I've already gone through almost the entire stack of records. br>br>It's a lovely machine, but I can't say that its enhancements are exponentially greater than those of the previous model. It appears to have a higher heat capacity, is a little heavier than I recall the other model being, and its turning knob is larger and more comfortable; thus far, it has not reached a heat limit like the other. br>br>I am very pleased with the machine; if I had to choose again, it would depend on how frequently I use it and how many records need cleaning. I'd lean toward the newer, more expensive model if I had to choose between the two. br>br>I hope this information is useful! Greetings, br>br>L, br>br>
This is a cleaner for records. There isn't anything to cover because there isn't any recor.
My record cleaner worked perfectly right out of the box and after cleaning over 200 records. My previous spin clean yielded far better results.
By removing the four screws that hold the feet in place, the unit can be easily opened. The unit is made of low-cost fiberboard rather than genuine wood. The so- The product known as carbon fiber is actually a 3M vinyl product that resembles carbon fiber. A large amount of epoxy cement is used to secure the vacuum motor in place. The build quality isn't quite up to par for a $300 purchase. The only catch is that it does a good job of cleaning up the records.
Selected User Reviews For Record Doctor VI – High-Performance Vinyl Record Washing Cleaning Machine (Carbon Fiber)
After reading numerous reviews of this product, as well as many others, I decided to splurge and purchase this record cleaning machine. When I opened the box and removed the cleaner, the first thing I noticed was that it was wrapped in the same textured 3m vinyl carbon fiber wrap that I'd previously used on car projects. At the bottom corners, it was lifting slightly. It's not a major issue, but the description should accurately state that it's a carbon fiber wrap. So, after reading the instructions, I proceed to clean 50 records. The machine is not particularly loud, IMHO, and has a volume comparable to a small handheld vacuum cleaner. The procedure takes time, but the end result is well worth it. Extremely effective at cleaning records. After that, I used Gruv Glide to help reduce static and improve fidelity on the records. I tried a few records and found that there were no more pops or static, and they sounded fantastic. The stylus has stopped picking up debris from deep within the grooves of the record. The instructions state that after 25 records, you should stop and empty the reservoir. When I took out the bottom plug, however, nothing came out, not even a drop. So I finished cleaning the remaining records and figured there had to be something to drain by now. There isn't anything. And I used a lot of solution to make sure the debris floated out and was sucked away. So I opened the cleaner's bottom to see where the rest of the solution had gone. To gain access, I removed the four screws that held the rubber feet in place. The poor quality of the materials and construction on the inside was shocking and disappointing, especially after spending $300. The unit is made of fiberboard, which is a step up from particleboard, and I discovered that two of the corner blocks that the feet screw into and hold the bottom in place were not properly glued on and were coming off. I had to go over everything again. epoxy them back in place The solution was supposed to run into a tube that had what appeared to be fiberfill material in it. There was nothing left to drain because this absorbed almost all of the cleaner. It's also attached in such a way that it won't come loose, indicating that it's intended to stay put. Is it possible to use? Yes. Is the price too high? Definitely, especially when you consider the materials used, the construction, and the overall poor quality of the product. However, when compared to similar products that cost between $500 and $1,000, this one is a bargain. I suppose it's a good deal at $2000?.
br>br>I'll admit, I was skeptical at first. This device appeared to me to be nothing more than a spin washer with a built-in vacuum cleaner, but after using it on over 100 records, I can confidently say there is a difference. br>br>If you follow the instructions, you should get good results. In some cases, I needed to give it a few more spins than the manual suggested (the manual says 2 spins). Three rotations should suffice), but this isn't a major issue. The 4 oz. of tea that came with it was a nice touch. It took me about 90 minutes to finish a bottle of fluid. Only a few drops per side are required for 100 LPs. Because the fluid is odorless and alcohol-free, I'm hoping you'll be able to re-use it. Fill the bottle halfway with distilled water and a drop of Dawn dish detergent, and you're good to go (though I haven't tried it yet). br>br>At first, I didn't think the vacuum would be "sucky" enough, but I was proven wrong. Put a clear record on there first so that you can see the vacuum working on the underside; the vacuum is quite loud, almost as loud as the mini shop-vac. I have a vacuum cleaner in my garage. Because it gets quite hot, I would recommend cleaning records in spurts rather than trying to clean your entire collection in one sitting. The manual specifies that the drain plug should be emptied after 8 hours. So far, nothing has been released from the ten records. Now for the results. br>br> I cleaned and played at least ten secondhand records that I had recently purchased, followed by five more. With the help of my old cleaner, I cleaned 6 records. The ones that were cleaned using a spin-dryer The records cleaned with the RDVI did not leave dirt or debris on my stylus like the washer-style system did. After each LP side (and sometimes even before the last track! ), I had to clean my stylus. After playing five records on the old machine and cleaning them, Nothing came off the stylus at all after 6 full LPs (cleaned on the RDVI). The old washer, as you might expect, is now in the trash, and I've found a new favorite.
It's been over a month since I hired the cleaner - It can only clean a few albums before overheating, so use it sparingly. br>br>The first time I used the record cleaner, I chose an album with a few pops and crackles that I couldn't remove using other manual cleaning methods. Before playing, I always use an anti-static brush, and as I was cleaning the edge, the brush became stuck. I was ecstatic to hear the record play without any pops or crackles, but then I noticed the stylus was caked in dust - It was unlike anything I'd ever seen before. I flipped it over to pay the other side, and yes, I was stuck once more as I neared the edge. The album has a lot of residue on it once again. br>br>When I clean my records, I use an alcohol water solution - To remove the residue, I had to clean with the solution again. br>br>I noticed the same catch on a few other records I cleaned and realized the residue was being left on the record's edge, so I measured the length of the vacuum's suction slot - It's not quite 12 inches, as it turns out. 2 inches around the outside rim, but not around the inside rim. (In this case, I believe a Mark VII is required. ) br>br>I'm now experimenting with using both the cleaning solution provided and my own solution to see if I can get better results, but cleaning the edge manually takes a lot longer than expected. br>br>Only one minor quibble: At the very least, the turning wheel should have a visible marking that can assist in indicating a complete revolution while turning the wheel during the vacuum process. Overall, it cleans well, but it is not the best option for someone with a large number of records.
Related Products For Record Doctor VI – High-Performance Vinyl Record Washing Cleaning Machine (Carbon Fiber)
