NVMe SSD Enclosure NVME USB Adapter,10Gbp/s USB C/USB External Case Enclosure Adapter for NVMe and SATA PCLe SSD Size 2242/2260/2280 B +M Key/M Key Tooless Design with Aluminum Case Grey

I placed an order for an IFull m. I used a 2 enclosure drive for my NVMe drive, which was rated at 3000 r/w and performed as such when mounted internally. I had previously purchased the manufacturer's enclosure, which only had a 1k r/w performance. The package was returned to me. This drive was advertised as having a 10g r/w rating, so I was extremely disappointed when it delivered slower than my other enclosure. The two photos depict the enclosure's flaws: the faster specs are from my internal drive, while the slower settings are from this enclosure. This isn't ideal. It also doesn't come with any tools; additional mounting screws must be removed with pliers. And good luck ever opening this thing once you've used the thermal paste to seal it up. Avoid this like the plague; there has to be a better option out there.

Wayne Cobb

| Mar 25, 2021

The Realtek RTL9210B chip in this iFull SSD Enclosure keeps it cooler than JMicron and ASMedia chips. This chipset is used in a lot of enclosures, but they all have the same issue. Because the thermal pad in those enclosures does not make contact with the metal case, the temperature rises. br>br>iFull is unique in that it is sleek, and the provided thermal pad actually makes contact with the metal case, allowing heat to be dissipated away from the SSD. Aside from that, it comes with two USB cables. USB and C to C C to A. The construction quality is excellent. br>br>Hint: if you're looking for a unique way to express yourself, try using the words "innov If you want to use the full-length SSD, rotate, align, and gently remove the middle plastic knob/holder that comes installed by default. br>br>I tested with a Samsung 970 EVO Plus and ran benchmark tests on Linux exFAT partition (25 * 1 GB cycles). Fast speeds were achieved, and the SSD's temperature never exceeded 55 degrees Celsius. The enclosure has a one-minute sleep time, which will likely save power and keep the enclosure and SSD cool.

Karsyn Dunlap

| Mar 29, 2021

0 ports. 1 support: I purchased a Samsung 970 Evo Plus in order to clone the laptop's small nvme 256GB drive to a larger Samsung 2TB drive. I set up Samsung data migration on my computer. My laptop can see the device enclosure, but there is no indication of a Samsung nvme 2TB display. I double-check that both USB c and USB 3 are in use. There is only one cable that comes with the device, and none of them can see my Samsung nvme 2TB drive. I'm using an Amazon-purchased enclosure from another brand, and this device can see my Samsung nvme 2TB drive.

Ethan Gonzalez

| Aug 05, 2021

When working with NVMe cards, this is a very useful tool. I got it so I could prepare an NVMe card for my new PC ahead of time and install it in the NVMe slot on the system board. br>br>There is one minor snag: Two small black plastic doo-dads are included in the package. The NVMe card is held in place by the dads. With my NVMe cards, I had to remove one of the two doo-doo-doo-doo-doo-doo-doo It would have gotten in the way of the card if it hadn't been for the dads, and when I took the card out to install it in my PC, the doo-doo-doo-doo-doo-doo-doo-doo-doo-do A word of advice: if you buy one of these devices, be very, very careful with the black plastic things lest you lose them. Without them, the card will not stay in place, rendering the device useless.

Trinity Costa

| May 02, 2021

  I have a NVMe ssd with M that I got from another project. a user interface is available With this adapter, I can now easily fit a 1TB portable SSD drive into my point. The package even includes foam to connect the NVMe to the metal enclosure, which I assume also serves as a heat sink. Slide out the NVMe, insert it, and secure it with the locknut. There was no need for a screwdriver during the entire procedure! It even includes two USB C-to-USB C-to-USB C-to-USB C-to-USB C, USBC- I'm not sure what else you could want.

Julius Serrano

| Feb 06, 2021

I went with this one, and it's great; just make sure your SSD drive is properly seated in the enclosure to avoid making the same mistake I did. When I first inserted my SSD drive into the enclosure, it appeared to be properly seated, and I was able to secure it in place with the thumb screw on the top of the SSD drive. When I plugged the enclosure into my USB port, Windows recognized the enclosure but not the drive. At first, I assumed the enclosure was defective, but then I decided to try reseating the drive. While doing so, I noticed a small portion of the SSD connector was visible before I reseated it, but it was quickly.

Yosef Koch

| Jun 26, 2021

Although many people initially thought the plastic pieces didn't work or were inconvenient, I am a huge fan of the design. Instead of laying the SSD flat and then installing the pin like in the video, slide the SSD into the connection slot and place the pin groove on the other end of the SSD while it is at an angle. While it is in the groove, push the pin down and twist to keep it in place. br>If you install as shown in the video, the SSD will be bent, and the plastic pin will prevent the enclosure from closing because the SSD will raise it higher. br>Overall, a lovely product; the only flaw is the lack of small installation instructions, which are causing many users problems.

Oaklyn Hogan

| May 05, 2021

? 2 SOLVED. My old M. 2 were screwed into place after they were inserted. The computer recognized the drive after plugging in the USB cable; it's that easy. The screw is, in fact, a key. br>br> It's small and only fits one way, allowing for a quarter turn. With fingers, it's difficult to hold, but pliers make it simple. br>br>I'm very happy with my purchase.

Mina Dalton

| Mar 06, 2021