YUYOND OEM Original Back Rear Camera Glass Lens Replacement for Samsung Galaxy S10 and S10 Plus (All Carriers) with Adhesive Preinstalled with Repair Tools and Clean Cloth
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Hey, our experience is that if the camera cannot focus, the lenses will go out of As long as the adhesive touches the lens, there will be problems. Taking care of your lens is easy.
Thanks so much! If you wish to search the video in the internet, please use only " Replace the camera glass ".
Selected User Reviews For YUYOND OEM Original Back Rear Camera Glass Lens Replacement for Samsung Galaxy S10 and S10 Plus (All Carriers) with Adhesive Preinstalled with Repair Tools and Clean Cloth
Take your time. Here is an update from a week ago. Those online videos caught my attention. The hair dryer was set on high for only a minute, and I did not stand too close to it. The old glass shatters into a million shards just as shown in the videos. I notice there are some very fine shards stuck in the lenses and around them after I removed all of the old adhesive. Using an exact knife, all the broken pieces were removed. A Q tip dipped in alcohol and a microfiber cloth were used to clean the mounting surface. tested the camera focus on all 3 lenses and all were fine. My final step was to remove the paper backing of the lens and drop it in. Due to the cracked old lens of one of my cameras, one of my lenses was dirty. Reassemble them all after you have cleaned them all. Many people do not get the results they want because of this problem. A WEEK of using the new lens has revealed that the camera has a greater tendency to take a long time finding the correct focus than it used to after it is first turned on. After that, the camera settles down and works well. If it happens again, I may buy a different The next time I repair it, it should go a lot faster since it has been repaired once.
Though the installation was relatively easy, the camera is difficult to focus on the mid range. To fix the blur, I need to zoom in and out until everything is clear. Please note EDIT I tried another glass replacement item shipped by Amazon, nonetheless the camera continued to fail to As a result, I ordered another Yuyond glass lens replacement as it worked better with the camera than the other one. As I always do, I used a loan cleaning kit to make sure both the camera lens and the glass replacement were Thanks to the new focus, the camera can focus well now!.
Several videos have appeared online that show how to replace the entire back glass of a phone in order to replace the camera glass. This is not the case with this product. Simply remove the broken screen over the cameras with the provided tools. Inject air into the lungs. To clean with alcohol and a cotton swab and then blow it with air again, I recommend using alcohol and a cotton swab. Press the paper into the adhesive, after which it should be removed from the adhesive. Apply pressure to all areas using the plastic tool. It is also recommended that you use either a heat gun or hair dryer to warm up the lens after applying to soften the glue, then apply pressure as it cools around the perimeter. I saved $40 by doing it myself instead of having it done at a shop.
It was helpful to have these tools. As far as adhesion is concerned, it is excellent. I was pleasantly surprised by the packaging of everything I received. Due to some reason, my phone seems to be very slow to focus after installing this glass, but the picture eventually seems to be clear. People who are doing this might find it helpful to blow some air around the lens before they put on the glass. During the breakage of the old glass some dust or something may have come loose, and now it is stuck to the new glass, interfering with my views.
So I called uBreakiFix, an authorized Samsung repair shop, and I got my phone fixed in a couple of hours. In the initial quote, I was quoted $90 for replacing the glass. However, they informed me that since parts of the glass were missing, Samsung recommended replacing the camera array as well, so the estimate went up It was at this point that I decided to try to repair the card I was just as comfortable as I had imagined from the videos. While being careful not to get anything on the cameras, I used more alcohol to remove the old adhesive. We found the tools provided to be very helpful and well constructed. The service was exemplary and my camera is working as if it were.
It fit perfectly with alcohol used to remove the residue from the old glass and I used painter's tape to hold it down for the first 24 hours after installation. I can't complain about the tweezers alone -- they are worth the 10 dollars. The Samsung Galaxy S10+.
Two of these lenses have had blurry images The first time I thought it was the camera and replaced the camera, but I had to replace the entire back glass as well, so everything was fine, but I recently busted the camera lens again and replaced the lens and it was blurry I bought a different brand that came with two lenses, and the first one I put on had no issues at all. A Galaxy S10 Plus is used in this example.
The replacement camera glass I ordered for my Samsung S10+ arrived on time. All of the camera's functions were fully functional once the broken glass was removed. In the end, it was only the wide angle lens that worked after applying the new glass. There would be clicks and blurriness when the zoom and regular lenses were used together. As other reviews mention, I am not sure whether the adhesive caused an issue, or whether the glass was too close to the camera. This replacement was even ordered again to try, but the result was the same. It works perfectly with a different replacement I bought from another company. It is advisable to beware of potential buyers.