Dorman (610-266.1) 'M12-1.50' and 40mm Long Serrated Wheel Stud
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is a front part that fits this. In addition, the rear on models only with RWD. In the rear, 4WD is made with part #610-
As a single, this is available for purchase.
There is no difference between these and original equipment manufacturers. The one I had was installed on a The strip out, crossed out connector worked perfectly to replace it Embedded in the wheel is a threaded The last tire shop gave me a prize in exchange for replacing my
There are 14 of those in a row. Twenty millimeters
Selected User Reviews For Dorman (610-266.1) 'M12-1.50' and 40mm Long Serrated Wheel Stud
This is a good match for the GX470. This is a very easy installation and you don't need to use any You'll want to pull the old one out, use a C clamp to tighten the bolt as much as possible, put the tire back on and tighten it all the way with a lug nut. Make sure you also replace the lug nut if yours is old. Thank you.
Hope you found this helpful.
item was listed as a direct fit for a 2007 Lexus GS350. There is a slight mismatch, the mounting holes are a little too small, and since the screws do not form a tight fit, the connection does not hold. The implication of this is that- It's possible to push the stud back through if you don't line up the tire correctly and press against the hub without touching the lugs when you attempt to install it. In addition, even if you manage this feat when you try to install a lug nut you may run into the same problem.
It appears that two of my rear studs snapped off when they were overtightened. They went crazy with the impact wrench in the tire shop. In my opinion, these are the perfect choice. The part is pretty much the same as the original. As well as a wheel stud installer, make sure to buy one.
In the beginning, I thought it was for five lug bolts. It turns out it is only for one. I was only going to need one, so that's okay with me. These lug bolts are not easy to install, but there are plenty of YouTube videos that show you how to do I found it to be very effective.
In the description, it was mentioned that the part would fit the vehicle, and it did. The price compared well to the chain parts stores, and the delivery was free. The expected day of arrival was observed!.
One of my studs had to be destroyed after my lugs were too tightly tightened to the point that they I replaced the original one with this one and it worked The Rav4 v6 sport is a 2010 model.
I had no issues with the part that I used to replace my wheel stud on my FJ.
A 2005 Toyota Camry is set up with it.