AstroAI Tire Pressure Gauge Expert, 0-60 PSI, Certified ANSI B40.1 Accurate with Improved Needle and Chuck
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The gauges must be taken apart and reassembled in this manner unless you are very good at it. In case you are truly unhappy with the two pounds, send it back and then In fact, I even had the same pressure with two different gauges I own. I removed the backs from them and bent the tab around the tiny pressure tube to be more precisely placed. Previously, I had a much more expensive one that had to be calibrated after it was dropped. Two pounds is equal to 1 pound. A slight adjustment should be sufficient, if you notice it moving, you might have gone There are many parts that are easily broken and very fragile. If you go inside after receiving the package, they may not take it back. Good luck with that.
We can work with Schrader Valves using our tire pressure gauge. The type of valve you have should be checked.
Please be respectful of our wishes as our products are not compatible with schrader valves. But, if you already have an adapter that can switch presta to schrader valve, the end with a schrader screw may work I would like to thank AstroAI Customer Support and wish you well
The air can be released by pressing one of the side buttons. This goes back to "0" once the air is released.
Selected User Reviews For AstroAI Tire Pressure Gauge Expert, 0-60 PSI, Certified ANSI B40.1 Accurate with Improved Needle and Chuck
It appears to be a good attempt, but not perfect. There is one downside with this tire pressure gauge which is the rubber hose attached to it is too stiff and almost takes a fixed setting. I like it, and it is accurate and matches the psi reading of other tire pressure gauges that I trust. Because of this, if the rubber hose is left in its original box, it will curve and make the gauge harder The curved extension hose did not appear to be affected after a few hours in a warm room. I left the tire pressure gauge there hoping the rubber hose would soften a little bit.
Because of its ease of handling, I like it a lot. It has to be asked, WHY haven't tire pressure gauges been designed like this before? When you're down on your hands and knees (or squatting and putting pressure on your knees), they are going to be tempted to try your little silver gizmo, which adds to the difficulty of getting an accurate I must admit that I never ever thought about it myself. Is it glow in the dark as well? In order to charge the battery for that, it needs to be in the sunlight for a while. It can be taken off the tire and will hold the air pressure number until you tap the button on the side. When you attach it, you will not lose about half the air pressure trying to get it on correctly. The first time it goes on that it works. I think this should have been invented before now, but I am glad it's here now. I like this gizmo a lot.
Dial is easy to read, swivel nozzle reaches into dual tire configurations, and allowing you to check pressure on both tires at the same time is a big advantage over normal The "hold" function on the gauge is the feature I found most helpful. While the gauge remains in the highest pressure position, the previous pressure is shown on the display. 2) I can push it on by feel, then pull out the gauge and see what value I have This has been very helpful. A quick check seems to indicate that the unit is functioning The rubber case seems to keep it protected from reasonable drops and bouncing around in a toolbox. I don't intend to drive nails with it, but I'd be fine with it bouncing around in there for a while. It is a no-brainer to have one in both cars because the price is reasonable.
My first attempt with this gauge did not result in any air escaping from the tire stem, and it indicated that the pressure was didn't even bother to keep the boxes in which it was shipped, because I was so amazed. After using it on all three of my vehicles a week later, I was not able to use it on the fourth. In some cases, the gauge achieved a seal right away, and in others, I could not get it to seal no matter what I tried. As well, the valve bled down on its own from time to time, which since the device was new did not bode well for its longevity. The clamp on my pump is a bit loose- This connection sometimes seals on its own, but it always does, eventually. Upon return, the gauge was turned off.
The purpose of this product is to allow better access to the tire stems located on inverted tractor tires. Having previously used a different one, I bought this one after the original one stopped holding the reading. In this case, the seller fixed it quickly, and the extension does help. measured the tire pressure of a brand new tractor tire filled at the dealer and it was three pounds under. It's also what I found when I compared my old gauge to the new one. Creating a compensation for the three pounds will help me use it more effectively. The rest of the time, it's a fantastic.
It's amazing how amazing this thing is. As opposed to the air pressure pens that are consistently inaccurate and vary wildly between readings, this method is superior. Throughout the process of checking and verifying, I noticed that the measurements were precise down to the very one PSI In addition, I like that you can save a reading until the pressure is released. In the event that you buy one and it doesn't work, all you need to do is tighten the tube and gauge. Using a nut and turning it so it stops and creates a seal is sufficient. In the event of a failure of the primary release, I believe this feature will be used as a backup. This is a great product!.
I bought it about 3 weeks ago, and it has lasted My wife and I either used this product during the day to test it out or at night to see how it worked. We were both pleasantly surprised that it does work as described. When I had it tested by my skeptical father, who has worked as a mechanic for over 60 years, he was impressed by the accuracy. The long hose provides comfort as it does not have to be positioned too close to the ground to read it, and the grip of it makes it easier to handle even when dirty hands are involved. In general, I am very happy with my purchase. It is definitely a good read.
The pros are The dial is easy to read in the dark (illumination), the ends rotate, the air release button holds readings after disconnection, the hose is heavy duty, the metal fittings are durable and the price is inexpensive. I wish the dial was flipped, since it is upside down when viewing the dial face. I think this product is so far a good one (See photo). It isn't my main tool, but I use it occasionally when checking tire pressure during periods of freezing temperatures. This will have to be seen over time to know whether or not it This will be kept in my glove box in my truck. Then I will probably order another for my other vehicle if this one lasts.