DAYUAN 23pcs FWD Front Wheel Drive Bearing Puller Removal Hub Removal Bearing Installer Installation Tool Kit

Thank you for your interest in my company. Let me start by stating that I rarely write reviews As far as I can remember, this is my 4th or 5th review ever. There are a few words that should be said about this item. Based on what I was told, this kit was nothing more than a cheaply made bunch of junk that would probably break upon first use, but worth the cost if I could just use it for the job that I needed it for. That's all right. My only response to this is that I guess that I will never be able to prevent assuming the worst about things I have never encountered. There is no doubt that this kit is well made, and I bet it will work great for many years to come. Any car should be able to have pressed in front wheel bearings changed easily with the tools provided in this kit. and photographs of the product in the ad do not do it justice.
The description, and pictures of the kit in the ad left me very concerned that the tools that I needed were not included in this kit, as it appeared to be That's all right. A picture does not equate to a thousand words in this case. This kit contains the tools needed to handle even the largest pressed bearings that are used on today's vehicles, and I would think that the vehicle that I needed the tool for has probably one of the larger pressed bearings. In addition, this kit comes with an impact gun which some other kits in this price range do not have. This was one of the reasons why I chose to buy this kit. Do you know how well it works? That's all right. There was no need to remove the steering knuckle or bearing from the Nissan Quest, which saved me from having to do a front end alignment after completing the job. It took less than an hour to change the front wheel bearing. As you know, I changed the bearing as soon as the vehicle was started. I did not have to spend an extra hour or so removing and reinstalling the bearings and knuckles. Overall, I think that this is the bottom line. This kit is highly recommended if you are looking for a good quality bearing replacement kit that will not cost you a fortune. However, be aware that you could find some other packages that look like this one for about the same cost, but those packages may not be of the However, I doubt that a kit at this price level could be of higher quality, despite the fact that some kits might be better than others.
Look at the product description and make sure it says that an impact gun can be used, in which case the kit should work. I'd like to wish you all a warm.

Xzavier Nixon

| Jul 13, 2021

These tools are good and do the job. This tool can be used not only to remove and install the bearing but also to reinstall The hub needs to be installed. Nevertheless, there will be no need to use it to delete the Hub. In this kit we do not deal with those kinds of problems, so we aren't required to do that. I only include these notes here because if you do not already have this you probably aren't a full-time pro at this. If you're a do-it-yourselfer, then you should check out this video Someone like me who does it themselves might find the heads up useful. You will have the rest of the job to do as well. There are likely other specialty tools you will need in addition to this kit. This product is a great buy in my opinion for the price!.

Louisa Cardenas

| Jul 28, 2020

all,, the tool did exactly what I wanted it to do, and that was to replace the bearings on the rear wheels of a 325 BMW. It has a bit of a soft feel, and its cups and cup plates are As the underside of the bolt looked pretty chewed up and rounded over, I doubt it will hold up long term. The two washers and bolt were simply too soft and the bolt itself was rounded over and chewed up. The amount of grease you apply will never make up for the stress you put on it after 15 years of removing bearings that they've had in their homes. I didn't see any evidence of leakage from the coupling nut. During installation, the bolt has a 28mm head and the coupling nut has a 32mm diameter. When it comes to the bolt, I do not have a clue how large the threads are if you want to change My solution was to order a grade 8 3/4-size A total of 10 7" and 6" bolts, two washers, and a coupling nut are required. Due to the fact that the supplied bolt is fully threaded, I ordered a 6" and 7" to account for those instances when more than the standard thread length of 2" on large bolts is required. Overall, I feel it was worth the investment even though it has some I value my personal time and feel that the extra time it takes to remove the knuckles and run them to a shop for their usual $100 press fee justified my.

Holden Hoover

| May 13, 2021

I was able to do it manually, but I wish I had bought some impacts to make the job faster. The adjustable wrenches I have worked with have not caused me any problems. Using it multiple times does not seem to be a problem. Be sure you grease up all The issue, then, is removal. If the issue is removal, then those bearings are probably seized. You need to heat the trailing arm as much.

Abner Tran

| Dec 29, 2020

It works well for removing bearings and installing them, as well as It's a great tool set that works well to remove wheel bearings and install them you can't go wrong with the price or the product that Harbor Freight is offering for.

Mikaela Cruz

| Jul 07, 2021

It's not like the tool itself could even push the bearing, of course it was there for 25 years, but it was still worth buying the adapters that you can use on a press just to have them. You may need a newer vehicle to make it work.

Boston Harrell

| Nov 21, 2020

I am very glad I purchased it. A bearing was missing in my 2012 Hyundai Elantra Limited, so I bought this tool. As well as removing the axle and hub, this tool was able to press the bearing out as well as insert the bearing back. The bolt can be prevented from getting damaged by adding antisieze to it. In addition to using one, I recommend watching a video on YouTube to learn more about it if you have never done so. I'm very pleased with this purchase. Changing bearings will be a breeze now that I have this tool.

Jad Montoya

| Aug 12, 2020

It came with a slight layer of rust on the parts. I had to clear them away, lubricate them, and clean So far they seem to work well when I put them together. I haven't tested them yet.

Brooks Sims

| Dec 04, 2020