ABN Ball Joint Press Tool Set - 10Pc Ball Joint Remover Tool Ball Joint Press Kit Service Tool Kit with Adapters
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Indeed, I did that a few days back
It measures 6 1/2 to 7 inches The inside of the bag has two pockets
A kit used to replace the ball joints on my 2005 Dodge Ram 2500 4x4 was handy. I did not stress, but it was a little tight, so I improvised a bit when we pressed out the It's a good idea to have a couple of spare steel plates or big washers when there is not much space.
Selected User Reviews For ABN Ball Joint Press Tool Set - 10Pc Ball Joint Remover Tool Ball Joint Press Kit Service Tool Kit with Adapters
A great value for the money. You need to buy it! A car press like this is the one to buy if you want one. I do a lot of research before making any purchases, as my wife can attest. To evaluate which of them has the best and worst features, I check out as many as possible. There are other reviews, but they do not have a great deal of significance. This extremely useful tool can annoy some people because they are unsure on how to use it or need long instructions before they are able to figure it out. This is a great tool that does its job splendidly. A chart showing the condition The clamp is made from forged steel, which the others do not There is no flex in the mechanism, which leads to straighter driving. Cups and adapters included in this kit are thicker than the others and do not buckle when under force. My recommendation for this tool is strong. To use your press more effectively, after getting it on and applying a little pressure, you should hammer the side of what you're pressing out It will be much easier to remove once this is done as it will shock the setting.
Anybody who has the right tools for the job can do it. To remove and install a press, follow these steps You will need this if you want to fit ball joints. I used it to install my lower joints on my 05 Dakota and remove them. It came with everything I needed. When using this tool / any ball joint press, it is a good idea to hammer on the threaded rod every few turns, as this will prevent damage to both the tool and your control arm. You can, for example, set up your tool to press out your joint and turn the threaded rod until it's as tight as possible. Punch a few times on the threaded rod top with the end of your socket removed. After you've done this, you'll find that the tool will crank down a further 1/2 or full turn without much effort. This process should be repeated until the joint has come Instead of using brute force on the tool and potentially damaging stubborn ball joints, this is a better approach. I used it to remove and replace control arm bushings on another vehicle as well!.
Heavy duty applications should not be performed with this product. I was able to remove the second balljoint, but the first broke. I own a 2006 Dodge Ram 2500.
I bought this on Amazon. Although there are no instructions with this kit, I watched a couple of YouTube videos and had no problem removing the old joints and replacing them with the new ones. Less than two hours were needed for the left ball joint and upper control arm, but only one hour for the right side. This simply shows that practice makes it easier to do! A few pros. I liked the fact that the "C" clamps were made of steel and not aluminum like some others that I've seen. No sharp edges or threads were visible on the clamp or accessories. The cons are Fit of the press screw was a bit loose, such that it would bind up from time to time. I had to use lithium grease to take care of that. I had a good time and it went well. This screw is not secure at the end, as the pin is not properly Although in operation, it has a tendency to slip out of place. Despite being an excellent tool to use at home and occasionally in the shop, it is not suitable for professional use. This tool shouldn't be used with an impact driver. Unless you use a special press screw, that would cause premature wear and tear to the pressing screw and threads in the It would be a good investment again if I bought this tool!.
It helped me successfully change the ball joint on the front of my 1995 Jeep Wrangler Unlimited (JKU) with the Dana 30. It did not require additional adapters or accessories for me to complete the task. There was only one thing in this kit that I used. During installation, I removed top and bottom, followed by installation of the bottom. I used pieces that have some wear marks from already one use, but I'm confident that it would last for a few more uses, and is still significantly cheaper than paying someone else to do it with their $750 Snap-on boards. As part of the.
In this case, I replaced all three of the U-bolts The joints on my 2004 1500 Silverado need to be replaced. There is no doubt that this tool is invaluable and well worth the expense. Once the bearing cap is installed, the bearing cap pays for itself. In fact, it You can clamp it onto the C-shaped bar easiest by clamping the C-shaped bar The tool worked great! I pressed the old joints off with PB Blaster after putting the channel in a vise. The new ones easily made their way on.
Purchasing this product was necessary for me to replace the ball joints in In addition, For both 1997 and 1998, the procedure is the same The expedition of 2003 and the expeditions of 1998-2003 This Navigator was updated in 2003. In addition, In my experience, I was able to use the ball joint press without any problems. In addition, I found no problems with either of my Navigator's ball joints, they pressed easily in and out. In addition, For this task, I had to use the largest receiver cup, but I did not require any other adapters. There was a total total of less than 5 minutes spent on pressing out and putting in the ball joints. In addition, Taking the steering knuckle off and the CV axle out of the way, then putting it back together, was the biggest task, both in terms of time and effort. It is likely that a great deal more stress was accidentally laid on the press In addition, The first ball joint I removed was displaced against itself due to an error in pressing it out (I used the wrong receiver cup). In addition, My first attempt was to crank the ball joint some with a breaker bar and four foot of pipe, until I put a nickel-sized dent in the top. In addition, My mistake was realized when I stopped, grabbed the bigger cup, and corrected myself. In addition, A ball joint came out right away. In addition, Although this abuse didn't harm the tool at all, it did cause some scratches. In addition, (Sprayed with lithium grease) The threads were not damaged, it was in tact, the C clamp itself could be used again The cups, on the other hand, were not deformed. In addition, It is hard for me to comprehend how any tool could break or split. I have read some negative reviews where people have complained about the product breaking or deforming. In addition, There are many features in My Navigator SUV with suspension similar to that of a F-150 In addition, removed the original ball joints of an 18 year old SUV that spent its first 16 years in New York using only the press. In addition, A press was used to break the ball joints out of the underside of this SUV, which was rusted. A ball joint press was highly recommended by me. In addition,   In addition,   In addition,.