Siphon Pro XL, Largest Siphon for Water, Gas, Diesel, It’s a Pump or Siphon, Get Work Done Fast, 8' & Shut off Clip

This is the largest available on the market today. As I have read all over the place about the Siphon Pro XL Siphoning kit, let me explain what it does for you in-depth, from beginning to end! To start with, this product comes with a clip that keeps the hose from tripping, a thick clear hose, a handpump prime bulb, and a hose clamp that keeps the hose from being pulled into the handpump thereby instantly stopping the flow. Several people have said that the hand pump bulb was not working. The first time we tried to siphon gas into our boat, we also couldn't get it to work. "You know the bulb has an arrow indicating which direction to insert it into the hose doesn't it?" I told my husband (as a woman who reads all directions on everything)? His quiet turn around of the bulb turned out to be the magic trick. Luckily, there was no damage to the bulb.
Now as to siphoning with the bulb on, it takes far too long and is not feasible. Therefore, if you decide the bulb should be used to prime the hose, you must install the crimping clamp on the hose before taking action. Once the hose is primed, clamp, remove the bulb, and then release the clamp to allow fluid to With this product, the most effective way to use it is to use the jigger without needing to use a If needed, secure your hose to what needs to be filled (you can use the securing clamp) and use quick in-out to attach the hose to the item to be filled. As the opposite end of the hose is filled with fluid and the fluid begins to flow, make an out motion to jig the opposite end of the hose. There is no doubt that this thing siphons fast! Let me explain. I'm talking three gallons per minute! Siphoning kit the old fashioned way. The product is totally worth the cost and a wonderful gift to give or receive.

Dior SHARPE

| Mar 07, 2021

There is no question about the quality of this pump as I tried to make a DIY first and it wouldn't work at all, so I've experienced what this pump can do first hand. After cutting the tubing, inserting the pump and starting the pump, I had it done in less than a minute. With just two squeezes of the bulb, 5 gallons of water can be poured into the car without a drop spilling. As far as I knew, there were only a few ounces left in the can and I could have taken those out myself. My method of choice was the slow way Once it is running you can pull the pump off the end of the tube if more fuel is needed. There were about 0. 03 gallons in this flow. I used to transfer gasoline at a rate of 5 gallons per minute, which was very reasonable for me.

My normal technique is to spill it all over the place and hope at least 90% of it makes it into its destination. In the future, I will use this to power my motorized equipment regularly.

Rodrigo Kelly

| Oct 30, 2020

Take care not to drop that brass part into the With modern cars, there are little spring loaded doors that will catch the brass and pull it out of the hoseing on the The brass clunk must not be placed on the bottom of the fuel filler neck door in the car. Use a funnel to hold it open. Perhaps the brass clunk could be better secured to the hosing with some directions about it and possibly with some instructions for how to use it There may be a clamp that can be used here. While it didn't actually work as a siphon, it worked as intended I was able to flow easily from the start.

Dane PARKINSON

| Jun 06, 2021

It is surprising how many of us have gotten scammed when we made the mistake of purchasing an "inexpensive" siphoning kit and discovered that it was actually CHEAP and not much of a bargain. The last time I tried it, I couldn't get any old gas out of my Honda Generator with that. (With help) poured gas out of the spout when she had given up. The generators I use quite a bit, but not always completely to the point that the fuel has gone down to zero. This kit is what I bought after doing my research. My generator was running when I stuck the tube down in it, squeezed it a few times, and nothing happened. I am stunned. My lungs were filled with a lot of gas. That was really all there was to it. It's not even apparent to me how many things you can do with this kit, but I consider it a terrific investment!.

Alia Gould

| Jun 11, 2021

Each siphon follows the same laws of physics that make it work, and they all are made of the same materials. There are, however, some who are more equal than others, and this one has the highest rank of equality. The unit is very well made with premium materials manufactured in the USA however, the many accessories that come with it give the unit several unique functions not available in most This clear heavyweight vinyl hose is made in the USA and measures 58" in diameter. Other units may also have 5/8" hoses, but not all do. The siphon simply won't work if the hose is too small or too light weight to prevent it from crimping. In this unit, as it is in some others, there is a bulb hand pump to start the siphon action, or to act as a complete hand pump when using as a vacuum is not I haven't seen a squeeze hand pump with such a large flow rate. This is the largest squeeze hand pump I have This bulb hand pump allows connection and disconnection of a hose with just a hand pressure - you do not need any tools. The clamps are not present. There are many situations when this is useful Here is a list of some. When the fluid enters this hose, and it is turned on, the hand pump has a one-way valve that prevents it from returning to its source. Later, I will discuss this in more detail. A "Jigger Foot" is mounted on the unit hose and it allows the source hose to be jiggled up and down to enable siphoning by simply moving it up and down. It is being provided by others by itself, but I have not had a good experience with them. Also known as a "Jigger Foot," this valve has a one-way function that will be discussed later in this article. Several accessories are provided in this unit, including a clip to secure the source hose in its container, an elongated tube to prevent crimping as the hose emerges from the source container, and a stabilizing tool to stabilize the hose in its In contrast with other units, there is a manual shutoff valve on this unit. There are many opportunities associated with this, and some of them Lastly, the unit comes with a coupling that can be attached to the hose in case you would like to cut it into sections and reconnect it later. You are now able to create a system that is only limited by your imagination when all of these features are combined. Attachment and disconnection of the bulb pump using friction are the only methods. As a result, the situation can be handled as best as possible. The hand pump can be used after it has been installed. If the vacuum mode is being used, remove the filter to increase the flow. One Way Valve on Hand Pump and Jigger Foot
These valves ensure that fluid pumped into the hose won't return by gravity to the source. This means you can stop the flow and not have to repress the system again when you want to restart it. It is also equipped with a manual shutoff valve. Basically, this means you can stop the flow whenever you want and restart it whenever you want. There is no doubt that this system is a superior one and is worth your attention. Nonetheless, there's more to say, but I'm too tired to write any more right now.

Mordechai Pham

| May 03, 2021