Remflex GS16511 Gasket Sheet
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It's probably true. There is a tight seal formed by it
I find it to be about 3/16" Can you maybe describe the thickness in millimeters?
It is 1/8 of an inch thick.
Hey, this material is raw, so you have to cut it This material is easy to cut, but be carefull as it is also easy to bend. Materials are 100% fine and thick, but once screwed together, they compress well and are almost half as thick as when they were un screwed. It's graphite, I tested it to burn it, and there were no heat damages. In my test, I set the value to *cough* Will see what happens at 1. *cough* 7 bars on my turbo engine, 0 issues. The test will be conducted at 5b and 900 degrees (but not This was torqued at 20/25nm and was installed between the engine and exhaust manifold, as well as between the exhaust manifold and the
Selected User Reviews For Remflex GS16511 Gasket Sheet
There are five x elevens and an eighth inch on each side. Its reviewers didn't mention the size of the product, even though the product reviews were very positive. As I wrote in the product description, the size was given as something that did not correspond to the actual size. So, I rang back up to give the actual size and what I thought of So it seems like this stuff has a lot of manufacturing costs, since it seems to be way overpriced considering the amount you get. Someone did not have a gasket in stock that I needed. The gasket I wanted wasn't going to take a month to arrive, so I decided to investigate this Because I'm needing to replace a gasket between one of my cats and the manifold, the temperature is going to be too high silicone gasket makers don't work because they can only handle so much heat. As far as I'm concerned, this stuff tolerates temperatures up to 3000F. It turned out I only needed an expensive gasket that normally costs $10 to make. With half the sheet, I was able to make it just fine. That's $15 down the drain. I'll make sure not to lose the other half. This company knows those who need to make their own gaskets are in a bind, so they take advantage of the situation to charge as much as they can despite the fact that you may have few other options. Despite the fact that $30 is cheaper than a rental car, it is still worth considering.
There is no better alternative to Remflex All in all, end of There are no gaskets left. You absolutely need these gaskets for your exhaust, and especially if you use other cheap parts. A flat, metallic gasket only has so much compression capacity, but an MLS gasket significantly expands and fills any gaps you may have In other words, when you buy a cheap exhaust with warped flanges, do not give the product a 1 If you are staring at this because you were a cheapskate, buy a decent gasket and never worry.
At 8 pm on the 26th (international shipping) I ordered in France. The order was received at 10 am on the 28th. This is incredible. There was no problem getting it from a small town in the US to a small town in France within two days. Excellent quality, very thick (3mm), seems to be 100% genuine (many fakes products on the market now), I have not installed it yet, but I am confident that it will do the job on my exhaust. On my S13, I have a little leak from the MLS gasket. I am 100% satisfied with the service!.
The pipe filler is made of compressed graphite that, when tightened, will fill any uneven gaps formed between the For my exhaust, I used it to make a gasket because it was whistling and causing the light to come on. There is no longer a loud whistle or check engine light since the Remflex gasket was installed.
Nevertheless, this is not an effective strategy in high pressure situations.
If you need to make a gasket, I highly recommend it. I was very satisfied with how it sealed.
This is an awesome.
An exhaust gasket leak can be fixed with this product. Fits well and can be trimmed to ensure a perfect.