* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
WIX Filters - 58010 Automatic Transmission Filter, Pack of 1 WIX Filters - 58010 Automatic Transmission Filter, Pack of 1 WIX Filters - 58010 Automatic Transmission Filter, Pack of 1

WIX Filters - 58010 Automatic Transmission Filter, Pack of 1

WIX Filters - 58010 Automatic Transmission Filter, Pack of 1 WIX Filters - 58010 Automatic Transmission Filter, Pack of 1 WIX Filters - 58010 Automatic Transmission Filter, Pack of 1
$ 18.52

Score By Feature

Based on 282 ratings
Easy to install
8.12
Value for money
6.87

OveReview Final Score

How Our Score Is Calculated

Product Description

The package has a 5 inch height and a 5 inch width. The dimensions are 2.4 cm (L) x 20 cm. Approximately 2 cm (W) by 24 cm. The height of 1 cm
One package of the product is included
China is the country of origin

Questions & Answers

Is an O ring included with the product? It applies to a 2009 Toyota Camry Le with 4 cylinders. My sincerest thanks go out to ?

Avensis 2 filter matches ring yes *br> I think it would be the same for a Attempt to undo your filters and compare them with the web. It's a ))

This appears to fit a Pontiac Vibe 2 from 2009. Does it have 4 wheel drive?

The answer is not clear. Though I know the vibe has the same engine as the Camry, I'm not certain if the transmissions are the same.

be a good fit for a 2009 Toyota Rav4 Is that right)?

The answer is not clear. We encourage you to order it and return it if it doesn't fit. Items can be returned very easily. My order was actually intended to go on my 2010 Camry V6, but did not to the store but was told there was no need for it to be returned. My brother in law received it for his Sienna - thanks again!! Essentially, this allowed him to get the item for free and I received a full refund without having to return it. It turned out to be the correct one after I ordered a new I hope you find that helpful.

Selected User Reviews For WIX Filters - 58010 Automatic Transmission Filter, Pack of 1

The Rav4 (V6) is a 2010 model
5/5

I gave this a perfect score of 1 As a result- This is the first time I've replaced the transmission filter in my 2010 Toyota Rav4. As a result of the filter and overdrive, All in all, the ring seems to be of good quality and the installation was fairly straightforward. Transmission fluid was flushed out during the process at a rate of almost 4 quarts per minute. The ATF was a brownish-black color and the magnets in the case were clogged with metal shavings when I conducted this maintenance at 92,000 miles. It is probably time to replace this after 20k miles. Don't be fooled by Toyota's claims that you never need to replace an ATF- don't take their word for it In their lives, 100 years is all they have (The average lifespan of an automatic transmission is 150k miles). The number of miles you can easily double by replacing your oil and filter regularly.

Finnegan Nicholson
Finnegan Nicholson
| Sep 16, 2020
I'll give you some Camry tips in Part 2
4/5

There are at least two filters listed for a 2005 Camry on #1 Wix. You will find the transmission code on the door jamb of the driver's door. Your filter is U250E if it says so on the sticker. While it can be in the way when reinstalling the pan #3, it will be possible to do the job with the left undercar shield still installed. By removing it, I am better able to see what I am doing as well as open up the work area. In #4, you can see a row of bolts above the frame on the transmission pan. Working here is difficult because there is not much space. It is necessary to remove the 19mm nut located on top of the transmission mount located on the driver's side. On the left strut, near the lower bolts. I then put a block of wood under the engine, and jack it up a few There is more room to remove and replace the bolts because of this. (Don't forget to replace the 19mm nut when you are finished. #5) Hold the new gasket in place on the pan using an adhesive like Permatex High Tack. Make sure the gasket is only applied to the pan side with High Tack. (Never use any type It is not my responsibility to fix your car or to repair your vehicle. Those are the things I do that work for me. It's up to you to educate yourself and make sure you're working safely!.

Nixon Weiss
Nixon Weiss
| Sep 23, 2020
Check that the surface of the pan is clean and flat before sealing it
5/5

This seems to be an excellent product. Exactly what I was looking for. If you want to make sure your gasket does not leak, just keep these tips in mind It is important that you keep the pan gasket sealing area Cleaning the sealing surface with a wire wheel ensures a good seal. No residue should be left behind after the gasket has been installed. The seal surface of the pans was placed on the glass using a piece of glass as a shield. A ball was used to level the pan's surface The point of a Once the bolt holes were smooth, there was no need to use a deep well socket. When the pan does not "rock" on the glass, you know you've done it right. In other words, the sealing area of the pan is flush with the glass surface. There was an original 2 mm deviation, but it is unclear why. To clean the seal surface on the transmission, wipe it with a clean cloth. In order to install "dry", please follow these steps It must not be sealed in any way. There are a few slight problems with the new gasket holes As you install this, the bolts can be held in with this clamp. Don't overtorque, but tighten in small steps. The ATF T-level was topped off with about 5 quarts I was given an IV and discharged. The fuel tank should be good for another 5 to 7 years.

Leighton Montoya
Leighton Montoya
| Jul 01, 2021
The 2006 Highlander AWD V6 Limited was my project
5/5

Highlander is the perfect match. It is important that you order the right one, as the FWD gasket is a different number. If the code is not there, examine your transmission To drop the ATF transmission pans was a little bit of a hassle as there are three pan bolts that are difficult to reach or get a wrench for, and one of them is especially hard to get a wrench on. For getting it, I took a 10 mm wrench (open and closed end) and slowly turned it until I was able to free the nut. Despite the small size of the socket, the extension made it possible to use the rest. If you need to tighten the bolts again, use a 1/4" socket set. This will ensure you don't overtighten them Using a torque wrench with a smaller torque setting during installation should be possible. According to the description, the part matched up perfectly. The document included the following We are ringing. If the plan is being reinstalled, make sure the plan is clean and when you add the new gasket, secure all the pan bolts through As you install it, the gasket actually holds the screws in place. The bolts were all passed through the gasket, and they held, then I put the pan back in and tightened them evenly across the bolt holes Keep diagram pattern tight until it is fully closed. Because the washer is smaller than the pan bolt screw diameter, this allows you to push all of the bolts through the gasket rather than one at a time. Plus, the washers make it easy to press the bolts into place since they are pushed through the gasket. The filter seems to be working fine so far. Put Toyota ATF T into the tank It costs about 50 cents The time it took for me to complete my vehicle this year was about three hours. From 75 to There are 4 quarts in this bottle. Please check the model year as some models with the ATF-approved shield may not be compatible with older models There is a WS that does not work I've heard that IV works okay, but I've never used it myself. that is not something I would take a chance on.

Walter Petersen
Walter Petersen
| Dec 05, 2020
There are two types of WIX filters available No, the 58010 Automatic Transmission Filter listed below does not fit the My Lexus ES350 2007 is an ES350, so I purchased this air filter from Amazon
3/5

com. Before I purchased the filter, I entered my car model on Amazon, and it informed me that it would fit. The most recent maintenance I did on my Transmission was replacing the oil and Take the panel apart and clean when I take the filter out of the box to put it in after I have done all the work. I was so disappointed in it because it was so different from the original. Ensure you do not purchase it in advance if you are not sure whether you will use In the same way that I had to throw away my status, I must now do the same. As a student, I cannot use it at all, nor can I return it since the term is over two years old.

Scarlett Dougherty
Scarlett Dougherty
| Jan 02, 2021
FITTINGS NOT AVAILABLE FOR 2011 COROLA
3/5

The product does not fit the 2011 Toyota Corolla, despite claims from Amazon to the contrary. I believe this option should be removed from "Fits your car. ". There are 19 holes on the cover of the ATF filter, and it is different in shape. The shape of this filter is obviously different, as it has 18 holes.

Abigail Larsen
Abigail Larsen
| Dec 28, 2020
Fit a Rav4 from 2011, but not a 2012 or 2013
3/5

The filter that came with my 2011 Rav4 will not work with it. Using WIX, I should have ordered the wrong part since my 2012 RAV has the correct part number. According to the owner's manual, the dealer also states 2011, I have ordered every part for my vehicle for the past 8 years under 2011, and the vehicle data plate also lists The cost of the filter - which should have been less than $20 - ended up costing me $75 ( for both filters) and wasting a lot of time running around. Had to go to a local parts store to buy an ADT filter. We put our vehicles up on ramps for the entire day. It is no longer possible to trust WIX filters for anything anymore. Number of the ADT filter The atp is B In light of the number of people reporting it, it does not seem to If WIX did something, it would make sense. However, instead of paying attention to the customer they blame them.

Elina Vargas
Elina Vargas
| Dec 02, 2020

Related Products For WIX Filters - 58010 Automatic Transmission Filter, Pack of 1