Walker 16337 Ultra EPA Certified Catalytic Converter
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is no way to clamp it into the factory In addition to Walker pipe 55431, you will need to order this. (4) clamps 35405, (4) gaskets 31379, (4) gasket 31690, and (2) bolt kits 36454 would also be required. It would be easy to do a do-it-yourself installation with this set of parts.
California Air Resources Board does not certify the 16337.
You have a great question. Thanks for asking. C is not an official Walker 16343 designation. Smog tests in California are possible to fail, so we are not sure if the vehicle will pass the Type B or California converter.
That should be the case.
Selected User Reviews For Walker 16337 Ultra EPA Certified Catalytic Converter
A perfect translation for 2009)! ), including the new resonator pipe and muffler even if you think just your catalytic converter is in need of reconstruction. Located on the factory side of the exhaust system are Firstly, there is a long pipe that carries the catalytic converter and resonator and attaches to the exhaust manifold in front and muffler at the rear of the vehicle. Unless you use a hand saw, you will need to cut and clamp/weld this long pipe some way you can use the existing rubber hangers, but new ones are cheap and easy to replace while you are disassembling. A muffler is also relatively cheap, and mine had a small rust hole in the pipe. Here's how to fix it Please DO NOT BUY the Walker Gasket (Part #31379) used to connect the exhaust manifold to the There is no way to make it Other people have commented the same way. I have spoken with Walker about the issue. you need the OEM one from Toyota The Walker Bolt Kits (Part #36454) do not include nuts you may Aluminized carbon steel is the main material used for these parts. In contrast to the factory system, these parts are not stainless. If the stickers are aluminized, it means they were dipped in a coating to prevent rust. Don't scrape them off with a sharp tool (leave them on) unless you want a spot that will rust through. You'll only need a few minutes to complete this simple task- If you have a lift at your disposal, you can do the job yourself. In this case, you should not spend more than $150 The full exhaust is installed for $200 by professionals. That's a really good price! I finished the job in a matter of hours and all the parts fit seamlessly.
The bolts were bought based on a video on youtube and have a diameter of 10mm and a threaded diameter of We tried 25 threads that are 70mm in length, and none of them gave us problems. Other than that, this catalytic converter has saved me quite a bit of money and works perfectly.
Fortunately, the check engine light stayed off after I reset the system (12/2016), and I hope the converter will last for at least several By purchasing the exhaust components from Amazon, I saved literally hundreds of dollars on repairing my car. The part arrived undamaged with protective bubble wrap and a very secure box, and it was on time. We've had our Walker exhaust system for almost 3 years now, and it continues to function, and we have not had any problems with our check engine light. Three days have passed since today's date I would recommend Walker products highly.
I have a 2008 Prius with a P0420. It would have cost over $1000 for the shop to complete the work. We find this part to be a direct replacement for AutoZone at a better price. Although I did use the free loan a tool program offered by AutoZone, I did not use the exhaust pipe cutter on my own. The cat comes with an accessory sleeve that allows it to be spliced in to an exhaust, but you will still need two 1 3/4" exhaust clamps and Walker 36454 spring bolt kit to accomplish it. Furthermore, I was able to reuse the exhaust gasket at the flange without any problems. After clearing the code, no further issues have occurred. A total of 2 hours were spent on this project.
This is a 5 star rating! The catalytic converter in my 2004 Prius was replaced. This is a very good program! In addition to passing CA inspections, the unit also passed a safety inspection. After having it mailed to a different state and remailed to me, I had it remailed to A lot of money was saved.
I was very pleased with it. When changing a pipe for the first time, you have to cut the original off. No clamps are included in this set. They come with a sleeve that connects the new pipe to the older one. A clamp or welding is required if the pieces are 1 3/4 inches apart. Included in the job are A timer ran for 1 minute while the codes were installed, jackuped, and removed. I spent 5 hours on the computer.
After about 5k miles and 3 months, the vehicle failed. There is a red check engine light on again. My intention was to get this item since I thought it would last. No warranty and it was outside the return period. I am really bummed out.
A great product that is easy to install, but the bolts you need to replace the ones you remove must be 1/2" longer.