XiKe 4 Pcs 11174TB Trailer Hub Wheel Grease Seals ID 1.125" x OD 1.784" Fits 3/4" Axles.
Score By Feature
OveReview Final Score
Product Description
Selected User Reviews For XiKe 4 Pcs 11174TB Trailer Hub Wheel Grease Seals ID 1.125" x OD 1.784" Fits 3/4" Axles.
A seal no. 2233TB is used. This is what I bought for both of my children. A boat spindle with a diameter of 250". * The ID appears to be the same on both lips in their drawing. There is no such thing as a similar action. Taking a look at the outer face of the seal, the first 'wiper' lip measures approximately 14" wide. About halfway between the second and third inner lips. snugly against my spindle as it always In other words, if you used them on a 1, you would get a If you purchase a 1/4" spindle, you will only receive a 1 This seals the lip of the mouth There is no such thing as It keeps your grease in, but it doesn't do anything for you when you work on the wiper seal. Double lips are caused by the fact that you have two lips at once You need two seals, one to keep debris out and one to do the sealing. Except for that, I don't know much else. The rest of these are not faulted in my opinion. It looks like they arrived quickly and are in good shape. Unfortunately, I will have to return them because they will not work for me. In the end, the moral of the story was Make sure that you measure your seals before putting them in! Here's an update A star has been added to the review since I did not have to wait long for my refund. The seals are not the easiest to install, and if they leak they can cause severe damage to your bearings, not to mention that their delivery time is lengthy. I really hate giving bad reviews, but I thought I should since these seals aren't extremely simple to install. Would a bad batch of chocolates be the reason for my problem? The sky is the limit. We hope that the supplier can check on the stock at their end.
The ID number is A size of 125" x OD 3, or a diameter of 3" During every trip, I remove my hubs, inspect them, replace the seals, lubricate, and inspect the bearings. The seals have been used a total of three times. So far, I have not had any There are two seals on each side of the Additionally, a sealant is applied to the outside of the ring (metal to metal contact area) that appears to work very My method for lubricating the rubber seal is to apply a tiny amount of wheel grease. As a result, the rubber does not touch the metal when the wheels begin to roll. Since I've been doing this for 49 years, I've never failed. There is a lot of value for the money in this package. My recommendation for these seals is yes. If you want a specific size, make sure you order it!.
The outside diameter of this cylinder is 98 inches. I have received my order, it fits perfectly, it is a low price, and the job is A lot of people love Amazon Prime.
Repacking wheel bearings requires removal of the rear seal in order to get to the rear bearing in If you try to remove the rusty rear seal on saltwater boat trailers, the seal will be destroyed. The following 4 seals must be obtained before you start the project! Fast Shipper & Fast Delivery! This is a great price. I can't ask for more.
Seals the grease joints with grease. It is a perfect fit On the spindle, the rubber seal was nice and tight.
I have no complaints so far and so far they seem to hold up well.
These seals are very nicely made. I am very pleased with the way it fits my landscape trailer. Quite happy with my purchase.
The fit was perfect. Tap the grease seal carefully using the mallet and block as with most grease seals. You do not want to hit too hard as this will dislodge the circular spring that prevents the rubber seal from moving.