7 Inch LED Headlight DOT DRL Light Halo Bulb Kit for Touring Street Glide Road King Ultra Classic Electra Glide FatBoy Tri Cvo Heritage Softail Slim Deluxe Switchback Black

It actually wasn't that difficult to put the light up. There are high and low beams that are both bright, and the halo ring makes it all come together. Ah and L are used for high and low beams, so I removed my old headlight and marked the bike wiring accordingly. The device should work immediately after being plugged in. It's okay to take your time. It took about 45 minutes for the installation to be completed. Here are some notes I would like to share The DOT stamp on top of the light corresponds to the two plugs in the high beam. In order to test low beam and blinker indicators, mark them with a marker, plug in connectors, turn on and see if they work. If your fairing dash indicators flash rapidly, turn on your hazard warning lights so that the blinker indicators will work properly. It is a headlight you will be satisfied with.

Miranda Valdez

| Aug 17, 2021

I didn't need YouTube at all. As a result, I now want to upgrade my LED replacement bulb for my 2010 Street Glide. I am not going to pay a lot for the light. It had good reviews overall, and the price was right, so I took the chance on it. In addition to the excellent packing, it arrived in a foam box as well. There were three different harnesses (none of which were used by me) and an instruction sheet. The package included the headlight, mounting bracket, headlight secure ring to the bracket, screws, and mounting bracket screws to mount the headlight. Those are the steps we took. The headlight must be removed, the black mounting bracket installed, the light plugged in, and the headlight mounting ring installed. Then the chrome headlight trim ring will be installed. That's not so hard, is it? Not at all. There was still more work to be done. The first reason is. Because my old bracket and mounting trim could not keep the headlight firmly placed, I installed a new bracket after which I installed the headlight, followed by the mounting trim. It worked well and was a good security measure. I found it easy to plug it in. In Harley touring models, two additional wires are included in the factory The orange wire with the spade connector and the female space connector on a black wire. If this is what you have, you only need to use the orange wire. It's the one with the Connecting the black wire to the spade connector at 90 degrees is difficult. As the orange connector is the one you are using to power your front fender lights, you have already got the power to power your halo! Using the official wiring diagram, plug in the new headlight, plug the red wire from the light into the connector on the harness, and Voila! Power to the green and red lights.

Here's the bad news I wrapped it with some electrical tape just to make sure it stays connected to the harness, because the plug that comes with the light is so cheap (remember the price you paid). It should be mounted at a convenient location, and then you can aim it after it's mounted. You don't have to worry about missing anything because I had some pictures but Amazon wouldn't let me upload them. The bright light is a little more with a defined hot spot center, and I cannot speculate on how it would perform on vacation. Other than that, I'm confident it works well considering how bright it is in my garage and how the garage door beam looks (flat with no shades). Thanks for your help, I hope it helped. It must be great having lights ranging from 250 to 700 watts. I just haven't reached that point. The latest update During the night, I drove. Although I don't know what kinds of lights other users had before buying this one, I can tell you that it's not extremely bright. There's a friend of mine who has the Day Maker headlamp on his 2014 ultra. The comparison between his light and this headlight would be like comparing the sun to the bright light of the sun. This light will not perform miracles for you if you expect it to. There is no chance of it happening. The light has been replaced with an LED bulb insert from Rivco that replaced the incandescent light. Brighten up the day with this day maker. It cost 60 bucks to buy the light compared to the Harley light that cost $400 In the end, you pay for what you get.

Caroline Howard

| Sep 14, 2020

A Harley Deluxe 2016 has just been purchased by me. Despite the LED running lights, its original headlight was still present. The LED headlamp I bought turned out to be brighter and whiter than I expected. Basically, it plugs into a computer It was all play except the halo wire. I didn't want to cut and replace it So, I cut off one of the adapter wires that came with the new headlamp that I didn't need, connected one end to the halo wire, wrapped the other end around the middle post of the plug, and turned it on. After taping it in place, I was able to plug the light back into the socket and it works perfectly! The music is great.

Fiona Marshall

| Sep 07, 2020

My rating has been updated to 4 stars from 2 stars. First, a big thanks to their excellent customer service. The first one I ordered was missing the 1x7 bracket, and the adapter cable for my bike, for which I was refunded for the cost of ordering Along with half of the items missing, the headlight that came with it was defective. As soon as the new kit arrived two days later, everything was in the box and everything worked flawlessly. The light is very bright. Some lights require splicing of Halo power. This does not need to be done. This is literally a plug for During setup, play the video. The impression is very good.

Hassan Roach

| Nov 11, 2020

By just clamping down on the wires (from the halo POS to the low beam POS), a device has been purchased to slice them together. I was pleased with the results! All the other black hardware was used, but the main bracket was kept from the stock headlight. You can just plug it in and it will work. Ensure that the light is in good working order before housing it. For the high beam to work, the plug had to be flipped over and refasten. It was possible to reverse the plug and there was no damage. Despite being well packaged, I'm puzzled by why the lid of the box wasn't Though that was strange, everything was as advertised for a fraction of the price of store brand light bulbs. And it's just as bright as stock bulbs. ****We are amazed by what we see now on our first night ride. It makes a huge improvement over what we had before. It's hard to imagine the difference between stock and this.

Etta Nunez

| Jan 20, 2021

The installation took about 5 minutes. After shipping, I received the package in a couple of days and it was untouched. A few extra parts were there, as well as all the required parts. I highly recommend both the product and the.

Reginald Stanley

| Dec 01, 2020

The title of the post says it all so far, It is important that I take it more seriously and find out how it works in the long run. I like the brightness since there is little shadowing and it projects an adequate The city lights make it hard to illustrate the full effect of brightness in my own city, but I do notice that there is a difference. I was able to install the system without any assistance from a technician It is an act of love for me to be a Harley mechanic (or mechanics in general).

Robin CHARLTON

| Aug 14, 2021

The 2015 Street Glide Special I just bought is now equipped with this. I initially followed these directions and chose the correct harness and plugged it in, but there were no low beams or daytime running lights. I however noticed there was another harness behind the one I was plugged in to, so I removed the stock harness and plugged in the new one. In the box of the headlight, there are 3 different look-alikes. The one behind it matched one of the three. All three functions of the low beam, the daytime running light, and the high beam worked once the harness was connected. I could not be happier with the product. It looks insane too, and I love the halo.

Dominick Levy

| Mar 02, 2021