Nilight TL-35 12PCS Motorcycle RGB Led Kit Waterproof Multi-Color Atmosphere Lights Lamp with Dual RF Wireless Remote Controllers for Harley Davidson Honda Kawasaki Suzuki, 2 Years Warranty

In this case, there are no mistakes to make. I bought them for my 250R. Hello, I bought these. I bought them for my 250R. It took me some time to decide whether or not to get an "underglow" kit for my bike since I'm not a really big fan of everything it brings to my bike. My awe was heightened after I had these on my bike for a few weeks. Since many days are spent riding to and from work in the dark around this time of year, they are a must have. these light up the bike, but they also illuminate the ground around it, allowing me to notice bumps and cracks which I normally would not see without these bulbs. One of the best parts of the package is that Nilight has added a second power wire (blue wire) that connects to the brake lights directly. As soon as you brake, the bike has a super bright red glow until the brakes are released, and then the colors and patterns are resumed. When you ride in darkness at 3 or 4 in the morning, vehicles behind you will be more able to see the bike. The money is well spent on these for this reason alone. investigating the possibility of making it so that that feature still works even if the rest of the lights are turned The kit comes with enough lights to light up your bike. The mounting tape seems to be holding so far, but I am unsure how long they will last and will update this post if they begin to loosen. If Nilight reads this post and comes up with a similar kit for the Polaris RZR or other side by sides, I would greatly appreciate it. Again, because of the brake lights function, the kit is well worth the cost. I believe it is worthwhile to allow the riders / vehicles behind you to do so. I think it would also be cool if there were an adapter that would allow you to connect the side by side light kit to your trailer so that when the trailer brake light came on, the side by side would light up. In any case, I believe this is a great kit and I intend to purchase another for my son for his low-speed.

Eliseo Keller

| Jun 16, 2021

I think this kit functions pretty well overall. Typical motorcycle mounts are easily adapted to these lights as they are bright and of appropriate size. This is what I installed on my Harley-Davidson It is one of the most beautiful bikes in the world. adapters do not fit snugly enough on my computer, which was my only complaint. In the first few days I had my kit installed on my bike I noticed different parts of the bike had different colors, which meant the connections were failing. Upon going through the diagnostics, finding the problem, and finding the only effective remedy was to cut off the connectors and connect the wires directly. I then soldered the wires. One of the pieces had a rock smash into it, and one flip up and the rock destroyed the piece underneath the bike. I recently ordered my second set of these, so I now have replacements. A motorcycle is not equipped with a music function, so the function is practically useless. The light on the back of the bike is so loud that it stays lit all the time. It would be great if it could be adjusted for sensitivity.

Angela SWIFT

| Oct 19, 2020

YouTube videos are one of my favorite forms of entertainment, so I was able to install it easily. Video instructions were poor in the box, but made more sense once you watched them. This may be due to following the instructions exactly, as I had no issues with bad LEDs or the strips sticking. The directions I followed were as follows Finding a flat place where the entire strip can stick is your first step, and the cables should not be so tight that they pull. Let it air dry completely after it has been thoroughly cleaned with dish soap (I used Dawn). My next step is to clean the area using rubbing alcohol. After I let it air dry completely, I put it away. Following that step, I attached the strips to the walls and did not move them while applying (no repositioning once they were This installation took me about a couple of hours It took 3 hours to get my Yamaha FJR1300ES up and running. As a result, I had to remove the side panels in order to access the ideal locations and route the wiring. Here is some information that I hope will be helpful.

Ellison Charles

| Mar 01, 2021

the third set I have with these exact lights on all 3 of my bikes and I have never had a problem in over two years. As a back brake user, I really like the possibility for the lights to turn red. One thing I wish it also had was a way to hook up with your own It is my lights, though, that get a lot of compliments. They are a great deal for the price and are extremely easy to install and have a very bright light. Fortunately, the tape holds very well even when I add a little bit of crazy glue to prevent them from coming These are some of the things I have. There are two lights right next to the exhaust and so far I've not experienced any issues Your work on these lights is fantastic.

Kelly Gonzalez

| Jan 28, 2021

I really liked the product*I had no problems installing it*I was able to adjust the lights while I was.

Andrea BURROWS

| May 03, 2021

Set up was very easy and the light was bright. All you have to do is connect them to the battery. You should definitely give them a try. This will make me feel safer on the road, and an attractive design will be added too!.

Julio Luna

| Dec 28, 2020

The customer service was also great. I normally receive a response from Nilight within 12 hours. Questions about the models were specific to me. of them work without any additional hardware. The installation was performed on a Vmax 05. There is only one problem Vmax's don't have much room. A touring motorcycle or a bagger has plenty of wire to run the lights everywhere. It took a long time to find a way to run and store all the wires.

Amina Holland

| Mar 16, 2021

This is a bright and dynamic player that allows you to change colors instantly.

Tomas Caldwell

| May 18, 2021