Seizmik Versa-Vent UTV Windshield Vent

$ 66.49

Score By Feature

Based on 245 ratings

Adhesion

9.13

Comfort

9.08

Sheerness

7.16

OveReview Final Score

How Our Score Is Calculated

Product Description

Seizmik's Versa-Vent self-install kit includes two Seizmik Versa-Vents, a cutting template, and everything you need to complete the installation.

Adding ventilation and anti-fogging features to polycarbonate windshields, the dual vent system provides driver and passenger comfort. As the scoop draws air off the hood, it directs it into the interior of the vehicle - even at low speeds, a surprising amount of pressure is generated on the inside even at low speeds

Through the scoop and the gasket between that and the windshield, the vehicle keeps precipitation out while still allowing air to flow in -- whether the driver or passenger desires it or not. A unique windshield vent feature consists of a durable, glass-filled nylo core

It is your responsibility to read the directions carefully and to install it at your own risk.

Make a point of cutting polycarbonate windshields only.

Questions & Answers

Is there any way these could work for the rear window to get air circulation through the side window?

As long as you have room, I do not see why they wouldn't work. The vents that I have are of a high quality I really like them

Can you tell me how long the screws are?

On my windshield, they are just long enough to pass through the plexiglass and backplate of the vent, as well as the front part of the vent. It is approximately one and a half inches

If they are installed, are they watertight once they are closed or do they remain open and allow rain to enter when ?

Although I would not call them waterproof, they are water resistant since we have been in the rain with them. The front windshield of our four-seat UTV has these vents we also placed a set in the back door ahead of the back seat, which allows air to flow through the back. It was expected that water would enter the door units, but there has been very little, even when flowing through

Selected User Reviews For Seizmik Versa-Vent UTV Windshield Vent

A quarter inch smaller than the outside dimensions, the hole is pretty much in the middle

5/5

Yasmin Guthrie

| Apr 13, 2021

Do your best to tape everything up slowly and with a lot I would have purchased the wind shield with these already installed from the factory, had I known about them at the time

5/5

Making a three hundred dollar cut into a piece of plastic makes me nervous. These turned out just fine at the end. Like many others, I opted to just install one in the middle of the windshield due to its large size and its ability to block Make sure you place a lot of painters tape under and on top of the template to keep it from shifting and wrinkling once you begin Please be sure there is plenty of clearance behind both so the vent can operate as well as to ensure your saw blade does not hit the Cut the first hole, then drill the second hole. It seems to be easier to use a saw. A Dremel just melts it rather than cutting it. I used it to clean up the corners and edges, It's finally here. I am very pleased with how it turned out. By using just one, you can make sure you have enough air coming into the bag and defogging is effective. We would really appreciate it if there was a way to remove the In all, the price and effort involved in installing have been well worth it.

Oliver Bowman

| Oct 31, 2020

The perfect addition to a windshield that does not have vents! This is my 2021 CanAm X3 Max which I upgraded with a Lexan windshield by SuperAtv

5/5

During the dust storm, the cab filled with a thick layer of dust. Despite trying the mesh rear window, the issue did not get resolved. This vent is installed on the top of the windshield, and it works well! It is now possible for me to direct air over my head, and that has solved the dust problem to about 95%. I liked the ease of installation (lots of videos on the tube) and the quality is great! The price was definitely worth it. In the case of a non-vented windshield, you absolutely should have They were originally going to be installed on the bottom of the windshield, but I found they were in my line of vision, so I installed them on top and they work beautifully.

Rosalie Jarvis

| Jul 22, 2020

This is a real game The reason I waited so long to implement this is beyond me! A great air control system

4/5

I wish I had it on my first SXS. Defrost works as described. I wish I had it back then. A fairly simple installation is required (take your time. ) follow the There is an amazing amount of airflow in the ranger! In my spare stock I may install one on the rear panel and see how it works (I have an extra rear window). You will not be disappointed in.

Lylah MISTRY

| Nov 09, 2020

I was very pleased with the product, great customer service

5/5

I received the product as promised. I have only ridden once since the installation but it was definitely noticeable that the air flow into the cabin of the sxs was improved. The customer service really stood out to me. The screw in my package was defective when it arrived. My email went to them and they responded the next day that I had screws Their arrival was a couple of days after that. As I mentioned, the only negative part of the product is I think they could redesign the cutout so it is more of a simple rectangle while still keeping the attractive design. I think the product is good overall.

Orlando Lawson

| Jun 28, 2021

I had a hard time finding a folding windshield that worked as great as this one did

5/5

Installation was easy and the product is of high quality. The investment was well worth it. It is now much easier to ride comfortably in summer cabs since the airflow has been enhanced. This RZR has a glass windshield and was manufactured in 2012. The blades in Bosch plexiglass jigsaws also do not fit into 1/4" holes.

Liberty Harvey

| Nov 23, 2020

This air intake works great, bringing more fresh air into the cab of my Turbo RZR

5/5

My cab got much too hot in the middle as it was venting in the middle and these helped to cool it off. To ensure that I could still see over them, I positioned them low enough on the windshield.

Melany BULL

| Apr 27, 2021

I like it a lot

5/5

Easy to put in, just tape the templates to the windshield, drill holes and cut out the pieces. As far as the smaller angle cuts are concerned, I used a dremmel instead of a jigsaw. Has pretty good airflow and it is nice to have the option to adjust the airflow upwards or downwards. I haven't had any issues with water leaking when riding in.