HobbyPark Aluminum Heat Sink with 5V Cooling Fan fit 540 550 3650 Size Brushless Engine Motor Heatsink for 1/10 RC Car Truck Buggy Crawler (Red)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Yes, we can swap the Traxxas Maxx for it, and yes, it's a great alternative
Selected User Reviews For HobbyPark Aluminum Heat Sink with 5V Cooling Fan fit 540 550 3650 Size Brushless Engine Motor Heatsink for 1/10 RC Car Truck Buggy Crawler (Red)
I found installing my Spektrum 1900kV brushless motor a simple process. In terms of performance, the fan meets my expectations and matches the rest of my.
The pros are The *br*- We will arrive at your destination quickly
- There is hardly any sound from the fan - I can hardly hear it
- The majority of fans have only one connector, but this was one of only a few that had a Guyana connector that you could hook to a spare channel on the receiver- As I used a heat gun to test my motor, I found the temperature dropped from 149 to 112 while the electric current went up. The test was done outdoors on a 90-degree day, and the battery was running on 2s. The *br*- One of the fins had to be sawed off for this to fit my rustler 4x4 vxl (example photo)
- I would prefer to have the fan positioned above the motor, however, the results seem to be quite satisfactory as they are. - The motor wires had to be filed down to prevent damaging them because of the fin that I cut off when I was cutting the wires off. * Other notes The *br*- A thermal compound has been applied to improve heat dissipation on the heat sink - Overall, I am very satisfied with the results 4/5. Having had to modify it in order to fit my needs.
I installed it on a Losi db pro battery powered by three cells. It fit right on the motor, was quickly and easily connected to the receiver, and we then bashed it around the yard for about half an It was obvious that the heater had cooled and that the heat sink was intact.
Almost every time I turn it on, the fan breaks. I am doing my second set of exercises. It has worked fine for years in my Granite and has taken much more punishment than usual. It makes no sense why my Senton is being broken into so often. Apparently, the second blade broke and jammed up the spur gear after it got lodged in the gear box. It's neither possible nor conceivable for anything to get through the grille and into the fan, so I'm not quite sure what's going on.
Aluminum is a good conductor of heat, so having more metal available for contact with the motor will produce Make sure to open up an entire side of the motor so it fits. It is very effective. You can hear the fan running as well as being able to see it. The fan moves a lot of air.
For anyone who has a HobbyWing 4000KW motor, this mount will fit perfectly. Keeping my motor cool helped to bring my temperatures down, so I'm actually gearing up a little bit now to get more speed. This is definitely worth checking out!.
It looks like everything is in order. As long as you know how to use it. It would be nice if the fan was a little bigger. More air will be moved if you move faster. I'm not sure about it, but it seems to be okay. The heat sink could be made narrower so that it does not catch the wire contacts of the sensored motor I have. I will have to drill it for a narrower shape as it does touch the wire contacts.
It stops or slows when it hits bumps, and gets warm if used for a long period of time. RC cars with a bouncing motor will not perform well with this system. Heated sinks have thick walls and are There is no thread on these screws, so putting them in a vice will cause them to strip quickly.
Related Products For HobbyPark Aluminum Heat Sink with 5V Cooling Fan fit 540 550 3650 Size Brushless Engine Motor Heatsink for 1/10 RC Car Truck Buggy Crawler (Red)
