Delta Faucet R10000-UNBXHF MultiChoice Universal Shower Valve Body for Shower Faucet Trim Kits
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
This is a rough sketch of the valve body. in only. The gray disk with the silver ring is a cap that you can use to pressure test your connections before finishing your shower wall. Depending on whether you want a single handle (controls both water temperature and water flow as you move the handle) or a two handle (one handle controls temp only and the other controls water flow only, there are two different types of cartridges), the correct cartridge comes with and is included in the price of the specific trim controller valve that you buy. The Delta website has a lot of useful information, and their customer service representatives are fantastic. When I had questions about my shower remodel, I called them three or four times, and they provided excellent advice.
This is a universal valve that must be plumbed into your current plumbing system. The trim package must be purchased after that. When a different source of water is used, this is the part that controls the temperature. There are about 30 different trim packages to choose from, each of which includes the cartridge as well as all of the handles, cover plate, screws, and other accessories. This is where you will select the style and function of your shower. Trim packages can be classified into one of three categories. The series 14 monitor is a standard shower control (one handle controls volume and temperature). The series 17 monitor has two handles that control volume and temperature separately, but the temperature is controlled by pressure. The top-of-the-line series 17T, which is quite expensive, has two separate handles for volume and temperature. The cartridge on these regulates the temperature using a thermostat. br>br>The main distinction between the three types of trim is the cartridge that comes with your trim kit. The function of your trim pack is determined by the cartridge. The cartridge for the 14 series is less expensive and only turns on and off the water. The top-of-the-line cartridge in the 17T trim series allows you to independently control volume and temperature. So you don't have to adjust the water temperature every time you take a shower, you can set it to your preferred temperature. You can turn on and off the shower without affecting the temperature you prefer. br>br>I would recommend the 17T series if you have the extra cash. You will not be disappointed with this style of trim. If you want to save a little money, the 17 series is the way to go. You still get separate volume and temperature handles, but you won't get the automatic temperature compensation when someone flushes the toilet or uses the washing machine while you're showering. Unless you're looking for a plain old one-handle shower that's been around for a long time, I wouldn't recommend the 14 series.
Most real plumbers simply use a second valve instead of a diverter. It's less expensive, and parts are readily available. Run 3/4" to the shower and feed both shower valves with a 3/4 x 1/2 x 1/2 Tee. Most of my showers are fed directly from the valve with 3/4" PEX, but this necessitates 3/4" PEX x! To do it, you'll need a /2" Copper Sweat Insert, and most plumbers do it that way, not just me.
That is all there is to it when it comes to housing. It does not come with the cartridge. On that version, the tub port is permanently closed (i.e. It is not possible to open the tub port by modifying it). They mean it when they say it's only for showering. When you purchase your Delta shower faucet, it will include everything you require. If you're replacing your shower head, you'll need one of these as well as a new delta shower faucet. That is all there is to it.
Selected User Reviews For Delta Faucet R10000-UNBXHF MultiChoice Universal Shower Valve Body for Shower Faucet Trim Kits
I'm writing this review with a specific piece in mind that I bought. I can't speak for the rest of Delta's products, but the one I bought had a threaded hole that was defective. This is not something you want to discover after you've put everything in place and tiled an entire wall. It goes without saying that if you buy this product, you should inspect it thoroughly before installing it.
An old Moen Chateau shower valve that didn't have a temperature anti-scald feature had to be replaced. The person in the shower would get burned or frozen every time we used water anywhere in the house. So far, I'm really enjoying it. With three 1/2 Sharkbite fittings, it was simple to cut out the old valve and replace it with this one. Fits perfectly in our 2x4 deep wall, which is secured with a 2x4 on the back. In addition, I bought a Delta Trim kit, which came with the cartridge.
About 6 months ago, we remodeled the guest bathroom, and less than a month ago, we remodeled the master bathroom. Both were equipped with the same Delta Multichoice Valve body. Even with the valve set to the highest temperature, the tub faucet only ran cold two months ago. We contacted a plumber, who determined that the cartridge was defective and replaced it for a fee of more than $200. The master bathroom's shower faucet was only cold yesterday. We started by turning the hot water stop completely counterclockwise, but the water remained cold. I called Delta, and they said they would send a replacement cartridge in a week or so. Despite the fact that I'm glad they'll honor their warranty, I wish the units hadn't failed so quickly.
It's best if you don't have a tub spout at all. Having my bathtub in my bathroom converted to a walk-in shower while in the shower As a result, I needed to purchase a new valve as well as a trim kit. The Delta R10000- was the option I went with. Because it doesn't have a tub spout, it's designated as UNBXHF. The other R10000 model has a tub spout that can be capped off, but I didn't need it and didn't want to risk any leaks. My other choice was a Moen valve, but they all come with a tub spout. Anyway, the plumber installed the R10000 valve with ease and even conducted a three-day pressure test to ensure that there were no leaks. There were no leaks and everything was in order. However, there is one thing you should keep in mind. The valve was installed (without the permanent cartridge) by a plumber. I believe the test plug was left in for the purpose of pressure testing. But it was later that day that he left. I had noticed that there was no hot water in the entire house. I called a repairman ($95) because I thought my water heater had broken down. 00) and he said the water heater was fine, but when he looked at the shower valve, he said, "That's your problem. " There was a "cross-over" situation. Because the cartridge was not installed, the cold water mixed with the hot water, causing a flow. Later, when the plumber returned to complete the job, he admitted that "cross-contamination" was a problem. With the valve set up for pressure testing the way he had it, "flow" would occur. Now that the permanent cartridge is in place, you can enjoy hot water once more. Cross- Without the cartridge, flow should be expected. In the Q&A section, there's a note about it. There is a section. br>br>By the way, if you're looking for a unique way to express yourself, try using the words This valve is part of the Delta Lahara 17 Dual Function Trim Kit that I'm using.
Is it merely a replacement? Or is it better to renovate while it's still being built? There are minor differences between the valve's models. Because I'm remodeling and tiling the bathroom rather than just changing the valve and faucet, I should have bought the "with stops" version instead of this one. I had replaced the hot water heater a week before, installed this valve, and then left it plugged off without the faucet cartridge. I couldn't get hot water anywhere in the house for the first time in a long time. This valve, it turned out, was causing cold and hot to mix throughout the house. I replaced the cartridge and handle and the problem in the house was immediately resolved. Pay the extra for stops if the area is being built on. I deducted one star because I couldn't find anything about this prior to purchase, on the box, or in the directions when I read through all of the information and directions. I'm sure this is common knowledge among plumbers, but I'm not one!.
Two of these were installed in new showers by me. They've met my expectations. Delta should be used behind the walls, according to two different professionals. I could always get parts for them, and they're mounted against the sheetrock on a 2x4. I attached them to the board with solder. It's best to solder the copper pieces that go diagonally into the valve first, while the valve is flat on a table or floor, so no solder flows down and blocks the water opening. I learned this after listening to a professional plumber describe how scolding the valve in place once caused him to have a problem. The valves were then installed, and the copper pipes connecting the left and right sides were soldered together. There were no obstructions to the flow of water, and there were no leaks.
It is very simple to set up. I just wish there was a 90-degree option for the inlets so that there would be fewer connections. I chose to use sharkbite connectors instead of soldering because it gave me a lot more confidence while installing. The front-facing plastic plaster guard is flimsy and kept falling off as I worked.
This valve has been leaking down into the basement since we moved in three months ago. br>I have a new bathroom with tiling and a new kitchen behind it. What should I do? br>Contractor says he'll pay a visit this weekend and is hoping for a miracle. br>Do not buy this valve from Delta; they should be ashamed of themselves for producing such a substandard product.
Edit: The leak was discovered after the contractor ripped open the wall. The problem was caused by a screw drilled into a water line and had nothing to do with this product. br>This valve is functioning properly.