Moen T2901BN Gibson Posi-Temp Pressure-Balancing Modern Valve Trim, Valve Required, Brushed Nickel
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In order to turn on, you turn the knob counterclockwise, and to turn off, you turn the knob clockwise.
This is what is written on the notes This valve needs to be installed You must already have Moen Valve #2510 installed in your wall for complete installation" *br>This trim kit requires valve # 2510. You should however dispose of your old Moen Cartridge that is inside your valve and replace it with a new one. I found the best one in "Moen 1222HD Commercial Heavy-Duty Portable Bathroom & Toilet Trailer" PosiTemp One Brass Shell - Heavy duty How to handle a bathtub or shower - I found that the cost of replacing only the faucet cartridge was worth it. The brass HD part worth the slightly higher cost.
To control the flow of your shower head you will need to add a flow control valve. A $10 bill will do. It is a $10 item that you can get from the hardware store and is To install pipe tape, a screwdriver and a crescent wrench are all you need.
This is metal! It is a shower valve that you will not regret buying. The installer is extremely picky about what they install and this is the best product to use.
Selected User Reviews For Moen T2901BN Gibson Posi-Temp Pressure-Balancing Modern Valve Trim, Valve Required, Brushed Nickel
Nevertheless, do not follow the instructions provided by the manufacturer! The thought occurred to me. Considering that I am a DIY wizard, I think the reviews have to be from people who have No way am I going to get caught up in this. After following the installation instructions, adding the valve to the right depth, and missing only the valve end, I ended up with a terrible looking installation and an exposed In addition, you can create a new scope of work if you wish So the first major problem with this product is that the handle sticks out too far when attached to the plate, so an inner collar is needed to cover the assembly. It comes with the kit, but it's a dull metal, not chrome, and it doesn't come with Moen's. It is also a flaw that you need to mount valves about 1/4 to 3/8" below the final tile face to ensure a flush fit. The valve (black plastic reference guide) should not be mounted flush with the tile or the handle when it is instructed. The result will be that it sticks out with a gaping hole so that water can enter. In terms of ease of installation, it is super easy if you want it to look If you want to make the effort look good, you will have to put additional effort into it. The only thing I had to do was cut an access panel out of A sawzall is a great way to - The valve is mounted to the backside of the block that is holding the valve. After carefully cutting out the nails that secure the blocking, the blocking will be free. Once this is done, pull the blocking back so that it is the right depth, and screw it in It was fortunate that the pipes were still free to move. We then patched up the drywall, retextured the wall, and replaced the access panel. I cut the panel in the toilet room and had extra paint left over to paint the patch. In the end I painted the patch, after all we had just redone the toilet room. This part of the instructions is not in the manual, but it might as well be because it seems everyone will have to fix it! Consequently, I have posted a photo of the recessed valve that led to the ideal This was a nightmare for me because my wife really liked the look of this trim kit, and we weren't able to find one that was better, so we had to make do with it. It's no secret that you know this. Having a happy wife will make your life happier!.
In a nutshell We have a new shower with this installed by my husband. It looks really good, I like the colors. There are finger prints present on the video (should it be posted), which we left behind while we were The handle remains wobbly even after he got the bolt in very tight, giving it a cheap look. He says there is only one bolt that holds it in, and he got it in very tight, but it still wobbles. This is my first time doing this, and I'd like to know how long it will last. A Moen valve was the original valve we had, which was at least 20+ years old. In order for this new shower handle to work, we had to also replace that completely. In my case, we were aware this had a possibility, as we are undergoing a complete remodeling and our house was built in 1976. A lack of clarity in this regard made the installation difficult.
It is too far forward and does not have any means of covering the screws and the turn valve. It looks nice straight up, but not when you look down on it. On the outside, it looks like trash and on the top, it looks even worse. What a horrible sight! It is possible that the trim kit was shipped with a missing part and that my plumber can order one. If not, I will be buying another trim kit and it will not be from Amazon.
This is the first step to installing an entirely new valve structure, and it should be done by professionals. A pop-up is not the same as a regular advertisement Is off/pops-up For this DIY project, you will need more parts to replace the old facing and install the new.
The whole thing feels like a rip-off to me. When I tried to turn it off for the first time, it wouldn't turn off In fact, the inside had a faulty part, which cost $54 to replace. I called my plumber thinking it was him, but he was in fact not the one at fault. In the plumbing store I was told that most plumbers they deal with say only Delta. A lower cost is associated with the parts that need to be replaced, and the actual product There are two lessons to be learned from this. The first thing you want to do is buy from a plumbing supply store, not Amazon! A second point Delta is the way to go!.
Getting rid of that plastic positemp knob is the best thing you can do! A Moen positemp handle I had broken twice in just six months after I used it was so cheaply made that I had to replace it. Despite that Moen is supposed to offer a lifetime warranty for their products, I was sick and tired of their garbage plastic handles. It is unfortunately difficult as well as economically challenging to switch to another handle once you are already a part of this ecosystem for one of these manufacturers. In the end, even though I wanted to leave Moen, I gave the metal positemp handle a try. That was a smart move on my part. Regardless of the build quality, it is outstanding The day-and-night cycle. There is nothing plastic about the entire handle, from the front plate to the back plate. A key point to keep in mind is that the physics of the device is totally different from the plastic knob, as the long handle creates a longer lever arm that in turn requires less force So there will be less strain on you and less strain on the device, and with that, there will be less chance of device failure as well (yes, that would include There's no other way to put it. I ended up buying three more to replace all of the tub and shower handles in the house after I was pleasantly surprised. I highly encourage you to replace that absolute trash plastic Moen handle with something that will last. While I am aware that other reviewers have complained about the handle being somewhat separate from the faceplate and being able to see the screw heads, these issues were not a significant issue It's strictly a matter of personal preference, and if they had swapped out plastic trash for something better, I'm sure they'd have a different perspective. Putting Amazon warehouse to the test is also a great idea. My experience with two of the handles was successful and the devices were fantastic, despite the haphazard packaging.
Related Products For Moen T2901BN Gibson Posi-Temp Pressure-Balancing Modern Valve Trim, Valve Required, Brushed Nickel
