BLACK+DECKER BDCS20C 4-Volt MAX Lithium-Ion Cordless Rechargeable Screwdriver with BLACK+DECKER BDA42SD 42-Piece Standard Screwdriver Bit Set
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
As I mentioned, I have used it to install blinds, actually supports, and a variety of other things around the house.
It's the best thing to do with a nut and bolt that's small. The hex adapter for 1/4 drive works well and fits in places where it doesn't fit. It is lightweight and works well.
Despite its size, a 1/4" hex can fit, but should be turned very slowly for drilling. These are best suited as screws since they run at low speeds. Then you'll need a driver, a guitar peg turner and a very slow speed drill, if time is not a concern. Small bits seem to be the way to go when drilling. It might be less than an eighth inch. Probably not going to torque anything larger than a 3/4-inch bit through it. This may be of some help.
Not to mention that I don't see why it shouldn't be allowed. There are no screws unless you have 40 or 50!
Selected User Reviews For BLACK+DECKER BDCS20C 4-Volt MAX Lithium-Ion Cordless Rechargeable Screwdriver with BLACK+DECKER BDA42SD 42-Piece Standard Screwdriver Bit Set
The other one is yours! The one you are buying is a dud. Some of the simplest things it does are not up to par with what should be the standard for a If you want this model, it is the BDCS30C. I'd rather spend two more dollars on this. There are three basic flaws in this one The cons are Nothing shows up in the charge indicator. 1. 2. Other screw bits do not have a place to be stored. The light does not have LEDs. The pros are which one you get -- get the other one instead. This BDCS30C I don't like. I wish I hadn't got it.
At this point, I have given it three stars. I was unable to give it a higher rating due to the following reasons As I use this to unscrew and screw parts in my lathe chuck, the forward/lock/reverse switch is in an awkward position. Additionally, the switch on my deceased unit had been positioned so you didn't have to move your hand to change directions. The fact that there is no light allows me to see where the bit is going. It is handy to have when working in tight areas. Certainly the biggest failing is that there is no charging light. Not only is it helpful to see that the unit is charging, when it is a full charge, you can also see that you have it plugged into a functioning outlet but the adapter has come loose for some reason. Despite its lack of torque, I was able to drive deck screws into fence posts with it, which was a major surprise. Is it a good choice, do you think? If you spend a little more, you might even get one with a charging light and perhaps a better location for the forward and reverse switches.
A REVIEW OF THE RECENT UPDATE In my effort to find out why this piece of junk failed after only three uses, I tore into it The two problems I found are as follows. This is due to a loose connection in the positive terminal of the motor. After I soldered it back on, it was good to go. I took a closer look at the trigger because even though it worked now, operation was intermittent. There are two metal tabs on the trigger which act as switches when In order that these two tabs would make contact when the trigger is squeezed a lighter (normal) amount, I bent them out further. My problem was fixed as a result of that. I do not understand what you are talking about I believe that you shouldn't have to work on anything that is brand The cordless screwdriver from Black and Decker will not be wasted money for me.
Over the course of four or five months, this product proved to be reliable. Furniture, small to medium sized items, and small to medium sized accessories came together quickly with this tool. As soon as the drill sat in my toolbox for a few months, it began to not The drill wouldn't work at all even when I plugged it in on the charger cord for two days at a time. Despite the fact that it is not long lasting or durable, the product is made cheaply. There's no point in getting this item, because it's a waste of money considering its.
Here are the good things Ten years ago, I would have purchased this screw gun as I would not have wasted so many hours looking for the IKEA assortment of screws The tool I dropped for the 12th time that afternoon was just a few inches from the ground. Obtaining a tight fit is extremely easy with this screwdriver, so it's great for screwing bolts in firmly yet lightweight to fit in most tight spaces. There is a lock function as well as a forward and reverse movement. It comes with both a flathead and a Phillips head. Easy to charge as you plug it in the bottom, and it kept its charge through packing a shelf and assembling a whole couch. The bad These should be sold at the IKEA checkout line. As such, this is only a screw gun and not a drill, as there is no way of attaching drill bits, and it is not built to handle the level of resistance that would be required. The purpose is not to complain, just to let you know. The pros are The following *br Exactly what I expected out of the boxbr> - The prices are very affordable - This little device is small and light enough to work for the majority of tasks
The following *br There was no need to buy again. The following *br You are more than welcome to ask me any questions you might have about this product. We are happy to receive any feedback from our customers. If this interview helped you in any way, please click YES I appreciate your help.
The plus side. Rather than keep this in my guitar maintenance toolbox, I purchased it for my own use. Great peg turner for changing strings. It lives most of the time in the left peg. This specifically refers to string(s) 12 and 13. It does come in handy however, so I use it on occasion for screw turning around the house AND for pilot hole drilling when I'm building something that requires a hole to be made - I use my cordless drill so I don't have to use this hand tool. To eliminate the need to switch between a drill bit and a screw bit, use D to run the screws in. I like this 'Ham Dandy' tool a lot. The battery is capable of holding a charge and provides adequate torque. A con is that the direction switch interferes with gameplay. I can understand the awkwardness, but it's still useful. There is no guarantee that you'll always have Kate and Chris It's also true for Edith, so I have to deal That's the way things are.
I like how easy it is to control power and speed. Pre-drilled holes are a great use for this material. An excellent grip with a light weight. I am as "beginning" as you can be with a power screwdriver since this is my first one. There was no learning curve and I did not need someone to help assemble my purchases, which was There is no need for this item for heavy duty jobs, especially with hard woods or for fixing or creating The holes on the furniture pieces were slightly misaligned in the box but it did not cause any issues. You would need to use a drill first if there were any major issues with the holes.
This model was purchased to replace a previous one. Because the grip angle has changed, it now feels more like a gun, as opposed to the old one that felt like a pistol in the hand. Although I don't know for sure, I can't recall the RPM being as high. Generally this is not an issue, however I had drill bits for the old one and they worked better with the higher RPMs. There is no significant difference in torque. We couldn't find a lamp, which was the biggest disappointment. It is one of the things I use most often in our household. There are places where a little light is helpful, such as under desks and in closets. Even though it works, I always think of my old one whenever I pick it up. I thought of what a treasure the old one was every time I picked it up. I really enjoyed it!.
Related Products For BLACK+DECKER BDCS20C 4-Volt MAX Lithium-Ion Cordless Rechargeable Screwdriver with BLACK+DECKER BDA42SD 42-Piece Standard Screwdriver Bit Set
