Ingersoll Rand 1099XPA 1/2-Inch Air Ratchet Wrench
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It is about 5 or 6 years ago that I bought mine, but I've been pleased with it ever since
No I haven't tried that out I do have an Ingersoll Rand half inch air ratchet and it works great. I think the company makes good products.
As long as you have the settings set correctly, whatever compressor you can afford should work as long as you have the money to spend
Neither the torque range nor the brand of this tool are mentioned. To the fullest extent of its capabilities, I use it. My recommendation would be to use a different tool instead of this Super Duty version if you are limited to just the lower range. The heavier duty design is specifically for applications requiring more strength. While it will run slowly, I don't know if you are able to insure only 12 pounds
Selected User Reviews For Ingersoll Rand 1099XPA 1/2-Inch Air Ratchet Wrench
To tighten and break bolts, this wrench has the torque power to do it. In general, cheap wrenches lack the torque required to break a bolt loose without using a wrench for either start or finish. Constructed with high quality materials. The speed can be changed with a button, and the direction of the exhaust can also be changed. The results of using this software will leave you fully satisfied. The Amazon Prime program gives you super-fast delivery.
large monster has gotten stuck, but the low end torque is satisfactory, and the trigger control is easy to use. In comparison with the volume, there is relatively little noise.
I use it daily at work, where I work in a machine shop. I have found it to be a great tool so far The only con so far is that the button (as opposed to the normal level activation) gets, after using it for a while, a little tiring.
If that's not a problem, then I would definitely recommend this tool as a daily.
An 19mm nut was tight on the front of my minivan, and I had to loosen it. The impact gun I had was not able to fit in a tight space so I got this. There was a stall here. The letter has been returned to you today as you requested.
It takes a lot of effort.
The quality of the product is good.
It was difficult to operate an air wrench due to the off-center mounting It allows access to all axes. Using just a socket is all you need to use this ratchet Neither an extension nor a universal joint is present. There does not seem to be a need for a lot I like using a portable compressor because it turns much slower than my pneumatic wrench and it is relatively In order to remove the heavily-tarnished surfaces, it needs to be strong enough A carriage bolt that is rusted. One thing that is negative is that it is "made in China". As a result of its greater torque, it receives extra points I am not convinced that the 50 ft. -long cable will work To remove these rusted nuts you would need strong ratchets that can handle 100 pounds.
Currently in use for industrial production assembly on a daily basis for 12 months. Nothing to worry about.