Makita TM3010CX1 Multi-Tool Kit, Tool-Less Blade Change

My small hands, being a woman, make me feel less confident. There is no huge difference, but the description suggests a small grip, and I thought I would find a smaller one. The amount of caulk I was removing from the concrete floor isn't that important when I'm scraping it off. In addition, the Makita is slightly heavier than my Bosch tool, which I was using, but the Bosch later died and that's why I bought

There are two adapters included in the Makita tool set so that you can use other brands of The 313249-adapter contains the following components For accessories for the Dremel, there are 6. This adapter is There are six attachments for Fein, Craftsman, Ridgid, and Ryobi tools. Bosch blades do not require an adapter when using them. The sander did a good job of scraping up caulk, which was a slow, tiring process. I ran it for a long time, and it It was easy to change the blade by pulling the lever to change it. read in another review that the switch was stiff, but mine was not at all stiff.

Novalee Chavez

| Apr 28, 2021

It does the job well, but the rubber cover for close-in work is junk, and if you remove the rubber shield, you'll find it's plastic underneath. It is an absurd idea for Makita to create a tool that is so easily damaged for such hard work! However, the tool has extremely low vibration, yet it is powerful, lightweight, and extremely lightweight. My Oscillating tool has a lower frequency than any other I have tried. Besides having a 3 it also has a 2. With the oscillation angle set to 2, it is quick to.

Leonard Patel

| Sep 07, 2020

The head of the tool should be overbuilt to make it stronger! I like how fast it changes tools, how quiet it is and how low the vibration is. With extensive use of the oscillating tool, I've come to believe it was the best purchase I could have made for such a One thing that convinced me was the OVER BUILT head pointed out by a YouTube reviewer, as well as other reviews comparing it to the most expensive options. Even though there may be cheaper options available, they all have some problems with either the difficulty of use, the functionality, or the reliability. Also, there were repair parts available for the Makita TM3010CX1 shroud in case something went wrong or simply wore out, and that was a big consideration. It would not have to be sent back to Makita in the event that anything broke. It is easy to change tools, and they are solid! A good tool can be found at an affordable price when you do your research, and this turned out to be an awesome tool with the best quality and performance for the price. You can buy it if you want. Your happiness is guaranteed if you do it It was well worth the money. Oh, I see. In addition, you get a quality case with it!.

Alejandro Gibbs

| Dec 12, 2020

The teak deck chairs I just tried it out on were teak deck chairs I got today. Dremel MultiMax40 died after 3 years of light DIY/home use, so it was replaced by this. There is a slight difference in weight between the Makita and the MM40, but it feels more solid and powerful. The case came with it, and the subwoofer came with the case One hard wood blade, one sanding head, and 8 sandpaper pads are stored in a detachable "case" that attaches to the main case of the machine. We have two adapters that will allow other brands of blades to be used with the Makita and four each of 120 and 180 grit. My old MM40 sandpaper pad could be attached to the Makita head and I could use all of the pads up. In addition to using a bolt to secure the blade to the head instead of tiny pins that are used on the MM40, it also has more robust blade attachments. There are no tools in this system In order to take off the head, a lever is used like in other tools. As well as being quieter, it also produces less vibration or noise than the MM40. I rate the overall performance as "bad" The first time I used it was about two hours ago. That's pretty much what I want.

Jane Burns

| Jan 06, 2021

Corded tools like this are excellent. In comparison to other multiplication tables Instruments I have owned (Porter-Case, Smith-Corona, etc. compared to those of Cable and Rockwell), this one is by far the most suitable. It has incredibly low noise. There is a lot of noise and low-frequency information There are vibrations. This is a strong power output, and this is a soft one The electrical start-up procedure is as follows I avoided other models requiring proprietary blade designs because this controlled motor operates at the same speed regardless of how hard you press it. Are you really interested in aggravating the situation? Please take a moment to read the information below I used the change blade clamp with my universal power tool with no issues Blades from a variety of manufacturers can be used with this. Aside from a blade, the kit includes adapters for other types of blades, an organizer case, a sandpaper kit, and a small case that detaches from the blade.

Maurice HOWARTH

| Oct 05, 2020

The purpose of this was to cut some corner moulding down after having floor coverings installed, so I could reinstall the floor moulding under the flooring. As for the procedure itself, it was quick and painless, and I didn't even feel the need for hearing protection for most of the time (although I still wore it though), which surprised This thing is big and bulky, but not in an unnecessary way - The amount is enough to give it some stability, and more importantly, it won't tear off your arm. It has since been used to cut trim and wood in a variety of strange ways. It's too early to tell if the tile attachments or sanding attachments will become favorites, but I expect this tool to be one of my favorites.

Paris Hayden

| Aug 31, 2020

The information should have been provided earlier. In the end, I found I could use it for things I never would have thought of Makita manufactures its products in typical fashion, which means they are Quick release lever was a little challenging to open at first, but it now works great, though it is still a little snug to break out of. As long as it's a design feature that makes the pin lock in more securely, that's great. I thought the case was pretty nice and came with a mini case for all of your different accessories, which I didn't realize was included. There are over twenty different blades in there at the moment. There are typically a lot of problems with Makita cases. Although I considered the cordless version since I already have a couple of tools and batteries, I am glad I decided to go with this one.

Kassidy Johns

| Apr 14, 2021

There is no denying the fact that this is badass. Despite my dissatisfaction with how it looked, I recurved it because it looked like it had been used by someone and returned. I decided to keep it since I was unable to return it because of an ongoing project. The purchase of this makita tool only reinforced my love of the company. Despite being so easy to cut, this thing cuts like a champ. My previous tool was a Harbor Freight tool, and while it worked perfectly, the teeth to hold the blade wore out completely, meaning it was not usable. It didn't help that after a few minutes of vibration my hand went numb. My review of the purchase is I am very satisfied with the purchase, the saw is great, and the price of the saw is excellent.

Amelie Snow

| Feb 02, 2021