Wahuda Tools Jointer - 6-inch Benchtop Wood Jointer, Spiral Cutterhead Portable Jointer w/Cast Iron Tables & 4-Sided Carbide Tips & 10amp motor, Woodworking Tools for All Wood Types (50160CC-WHD)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Taiwan is the source country.
On the cutter head, there are 16 cutters.
Yes, that's how I treat the edges and face of the wood when I join them together. However, whether you're joining them together or not, it just straightens and aligns them. I really like the 8" capacity and spiral head; they make for very smooth cuts, and I would recommend this joiner. I've been in the tool testing business for a long time and have put a lot of time and effort into this tool, and I've never been disappointed. Daniel from the podcast It's Wood.
It weighs "approximately 64 pounds," according to the Wahuda website.
Selected User Reviews For Wahuda Tools Jointer - 6-inch Benchtop Wood Jointer, Spiral Cutterhead Portable Jointer w/Cast Iron Tables & 4-Sided Carbide Tips & 10amp motor, Woodworking Tools for All Wood Types (50160CC-WHD)
It's a pastime for my wife, and she runs a consignment shop where she sells some of the items I make. After reading some of the reviews, I was VERY hesitant to buy this unit. Concerning the fact that it is a plastic fence (NOT. It's made of aluminum) and this is the other. If you're breaking the handles (yes, they're plastic), you're overtightening them. Yes, the tables were AWFULLY ALIGNED, and I spent a significant amount of time adjusting, readjusting, and fine tuning them. I now have a TOTAL KILLER JOINTER WHO EATS WOOD AS A SNACK! Seriously, I had a loaner PORTER CABLE 2 blade unit that was GREAT and worked perfectly. LOUD AS HECK AS WELL! Ear muffs were an absolute must for me. When compared to the PC, this unit snores like a baby! I ran 6" wide OAK through it and it was NOT AS LOUD AS THE COMPUTER WOULD BE IF IT WAS NOT CUTTING WOOD! Yes, as you can see from the title of this post, this is a no holds barred comment. I have nothing to lose and everything to gain; all I want is for a REAL PERSON to explain this unit in REAL TERMS! Now that I've seen how well this unit performs, I'm SORRY AS HELL I DIDN'T GET THE 8". Yes, metal handles for fence adjustment would be more appealing. Just make sure you don't overtwist them. The fact that the table can be adjusted and that the unit is SOLID BUILT appeals to me. I adore the quietness with which it cuts. It's nearly TERRIFYINGLY QUIET. Check to see if you're depleting the stock too much! br>br>To deal with the WEDGE cutting the fence from the back to the front. Check to see if your OUTFEED TABLE is aligned with the cutter blades. Only adjust 1/4 turn at a time, as I discovered that when you loosen the big screws, the table moves a lot. DO THE SAME THING ON THE INFEED TABLE AFTER THAT! I experimented with the outfeed until I discovered that the infeed was not parallel to the blades. What's more, if you feed too heavily at the entrance, you'll end up cutting wedges! Repeat the test at least 12 times on a scrap 6" board. 18 inches in length DO NOT ROTATE; instead, flip the ends from end to end, keeping the SAME EDGE against the fence. after a number of passes Measure the stock on both sides of the fence. You did well if you weren't too far away. IF YOU WANT A THICKNESS PLANER, GO OUT AND BUY ONE. IN CONCLUSION. br>br> This machine is absolutely fantastic! The packaging was OUTSTANDING. IT WAS SIMPLE TO SET UP. IT WORKS PERFECTLY. br>br>I'm so disappointed that I didn't get the 8" model for WIDER cuts now that I've seen how well this unit works. Purchase it, make the necessary adjustments, and enjoy it! This was not a paid or solicited review, by the way. This is merely my opinion. chow !.
I hate writing negative reviews, but I don't have a choice because all of the adjustment knobs are made of cheap plastic, and I broke both of them on the first day. The fence is of toy quality at best, and even after two days of calibration and testing, I couldn't get it to cut properly. I spent a lot of money on a straight edge and feeler gauges so I could calibrate it properly, but I soon discovered that the infeed and outfeed tables are both sagging in the middle! I couldn't believe a short cast iron table could be so uneven right out of the factory. It's no surprise that I wasn't getting accurate cuts; fortunately, Amazon refunded me despite the fact that I had exceeded the return period. I'd recommend saving your money and purchasing a proper full-size jointer instead. If you don't have room in your shop for one, invest in a good hand plane or learn how to join wood with your table saw and thickness planer. Make a financial plan.
So, I suppose you could call this a novel approach to jointing. I was hoping that something about Suze would be able to meet my requirements. I've got the number eight. " I had a hard time getting the tables to lay flat on their own. When I called and emailed the company, I received very little assistance. They said their tolerance is (insert whatever you want here), but it's far too liberal! They don't go down to the thousandths of an inch, which I need. It's interesting that they don't bring it up. The instructions are also a disaster. I couldn't read the pictures because they were black and white. I build tables, which necessitates the use of large, heavy boards. That, let alone a glue-up, is too much for this thing. It's mostly for removing finish. The helical cutters seem to be in good working order. There aren't many, and even if there are, any dense hardwood will hurt it. So I can't get to the coplainer because he can't handle large boards. br>br> Extensions might be useful, but they're difficult to level as well. The fence, at long last. It sways back and forth. The tables swell and contract. That's basically all there is to it. If you're working on a small number of boards, such as one or two, Go for it if you have 3 feet to spare. However, if you're working on a larger project, I'm not seeing it as much as I'd like. "I'll build infeed and outfeed tables around it!" you might think. " I put that to the test. You're not going to be able to make this work, no matter how hard you try. Are you looking for a reliable jointer? Go out and get one. It appears that they are. a regular jointer, in other words! You'd be better off buying a used jointer for the same amount of money, if not more. br>br>It's been about 9 months since I first got it. I had given up hope that the company would help me. Basically, I believe they are three guys and a trick duck, with the exception that the duck was ripped to shreds. I believe they purchase from an offshore manufacturer and resell it through online retailers such as Amazon, never looking back. However, it's a well-known name.
For a long time, I was that guy before settling on an 8-inch screen. I'm so glad I did; I can't believe I put it off for so long. br>However, there will be a learning curve if you are new to jointing; knowing where and when to apply pressure is (in my opinion) an art form. The spiral cutting head is a must-have, as it produces very nice cuts with little to no rough edges. br>The jointer table came pre-aligned, but I double-checked. The most time was spent perfecting the fence alignment, but once you've found that sweet spot, you're ready to join.
It took me about an hour to get the in/out feed tables to work together. planer. The fence was simple to erect, but I'll have to check it on a regular basis to ensure that it remains at a 90-degree angle. I was surprised by how quiet the jointer is. As a weekend woodworker, I believe this will last a long time. In general, I'm happy with my purchase. If the leveling system were a little easier to set up, I'd give it a five-star rating. I noticed that the tables aren not 100% flat, but they are good enough to produce a 90 degree edge on lumber for tight glue ups. I plan to make cutting boards, so.