SILIVN ER20 Spring Collet Set for CNC Engraving Machine and Milling Lathe Tool Workholding Engraving Collets(14PCS)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
You will not be able to use them. This set of collets is designed for ER20 spindles, not for
In addition to the collets, there is an outer wrapper securing There is an individual shrink wrap for each collet. Having to cut them off was the only option. The seller did not seem too concerned about this when I returned them to him. In my memory, the boxes were reusable and made of plastic.
It is difficult for me to answer that question, but I can tell you that I was disappointed in the set I received given the runout between. The starting number is 004 and the ending number is 0. As stated before, every one of the 5 collets that I checked with a test indicator on my mill spindle was 0.10. Compared to what was listed in the description, this was far superior. There could have just been a defect in the set, but I sent it back.
Collets should go to 6MM with a 1/4 collet.
Selected User Reviews For SILIVN ER20 Spring Collet Set for CNC Engraving Machine and Milling Lathe Tool Workholding Engraving Collets(14PCS)
The collet of this set was very poorly machined in an important regard. The slits were rushed through and a significant number of them didn't reach full depth barely skimming the inside diameter, leaving a long strip of uncut metal As a result, the slitting saw had been retracted early leaving a significant lump of metal at the end of the slitting process. In each case, there were several of these artifacts on every collet that required a lot of time and effort with a needle file to remove just to bring the quality to "acceptable. " As I was able to file them, it suggests that one needs to be quite careful when In my preliminary tests of run out, I did not find much to be happy about (though, to be fair, I only checked a few of the collets). Needless to say, I had hoped for more.
When it comes to precision, you should purchase better collets! There is no high quality in these collets. About , if you want to be precise. There is a total runout of 05mm. The first thing I did was replace the spindle, and after I tested runout again, I still got the same result. There are 5mm. I have noticed almost no runout when I use the collet that came with my spindle. It's the cheap collets, which don't conform to micro precision, that are to blame.
My bad for expecting more, I should have paid more for the collets. It went from . to . On the collets, it went from to . No. 003 Only a few people were on either extreme, the majority in between. The number one There are a number of 008 ranges. During the spinning of some of the collets, you could see the tool wobble. It is fair to say that no specific runout has been advertised. Since the collet tolerances were so loose, it was also difficult to snap most of the collets into the collet holder. There were a great deal of irregular cuts made with the slitting saw. A series of collets with a specified size was also purchased. I ran out of money by 0003. The collets I bought for $50 more were equivalent in quality to those reviewed in this review, but I got 1/3 the number of screws. If you are considering buying, make sure that it meets your runout requirements. Paying for something does give you what you want. It goes without saying that I returned the 26 piece set to Amazon and the seller without having any problems.
There are some who have experienced problems with their collets, but as far as I'm concerned, I have been fortunate and they have performed As for me, I am not using them for milling but rather for turning my smaller pieces on a wood lathe without a chuck since the pieces are usually too small to accommodate a chuck. For those tasks that require working with finials and stems for lids, the collets are far easier to use. Additionally, by feeding my workpiece through the spindle/collet, I can turn one right after another without having to stop and reposition. This is Chuck. In addition to crochet hooks, knitting needles and yarn spurtles, I also turn items such as crochet hooks, knitting needles and yarn spurtles, and being able to use a collet versus a chuck makes the process In addition, I appreciate the fact that the collets do not leave any impression on the workpiece, as is the case with many other chucks. Using some of the softer wood species, these chucks tend to leave impressions/indents that need to be sanded or cut out. This is time and wood wasted. For a wood lathe I'm glad I had the opportunity to work with them. I have been able to do some of my work more quickly and more safely since I've been using them. It's a hassle trying to keep a piece that is 18"+ long and only 7/8" in diameter centered in a chuck, but with the collets, I have yet to run into With respect to the quality/craftsmanship of the collets, I have noticed what is mentioned in a few other reviews. There are some lacking slits on some of the collets. If I was doing ultra-precise work, that would certainly matter, but in the case of what I am doing, I am more concerned with the piece holding securely and not marring my work surface, which it If every woodworker or even someone who does other tasks on their own needs some inexpensive collets, then Those might be the ones you want to check out if you need a precise application.
As promised, a high-quality chuck with all the right sizes was provided, as well as a reminder that their 100% satisfaction guarantee applies. They provided a brochure that asked me to rate their shipping speed, item description, and communication with them. It was a pleasure to ship at such a fast speed. After using the free (not prime) shipping on 5/17, it took the system a day to process so there was a 10 day delay in impressive. The description was spot on, and since their actions and quality met or exceeded my expectations, I didn't feel the need to communicate anymore. In my reviews, I present things as they appear to me. In fact, I am not paid by or endorsed by any of these (or any other) companies and I am really happy with the quality and professionalism of their work. As a testament to the quality and care I received, I am only saying this because my review sounded so good.
For the purpose of holding work pieces on my mini-desktop, I purchased this set There is a lot to be said about run out on a lathe. In my testing, I used gage pins and hardened drill bit blanks to measure the runout on several collets. It was all over the place where the collets ran out. 0 is the size of the 1/4" collet. This is a Thickness of 10 inches! It is expected that about 0 will be generated. Using a collet chuck system, we manufactured a 002 inch TIR. A ER25 collet chuck with a 0. 30mm arbor is available for purchase. It is a TIR of "002". My original set was returned and I obtained another set from a better website and paid a slightly better price and received better shipping.
If you're looking for a price that can't be beat, this is it. The right place to shop for absolute precision is not the wrong place, and your budget should be adjusted accordingly.
While mine was a bit rusted, everything else was in good shape. I only had to clean it up a little to remove packing oil before use. It has been less than a week since the last runout. It is an excellent resolution for the purpose I need (I don't have a higher resolution indicator since my work does not require that level of accuracy), and it is definitely acceptable. Ends of appropriate size may be held by them My mill has worked very well and I have not experienced slippage with heavy cuts even in tough materials.
Initially I was a bit skeptical of the quality at such a low price. It was mainly the runout that worried me. I must say that I was very pleased with the results. You can use 0 as an example. The runout was measured on two randomly selected collets using the 001 indicator. In the runout, there was little discernible difference. Need a to be able to write. I would like to know if you can help. Using the 0001 indicator, a specific reading will be provided. It is only some of the collets that have been etched with sizes - that is the only negative. This is not a very deep hole, a little bit off-center Most of these were pretty small, especially those near the center. This is no longer an issue for me since I built a simple plywood holder to store them.
Related Products For SILIVN ER20 Spring Collet Set for CNC Engraving Machine and Milling Lathe Tool Workholding Engraving Collets(14PCS)
