Freud 3-1/2" (Dia.) Raised Panel Bit with 1/2" Shank (99-518)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It's perfectly fine to do that. Since the depth of the bit is greater than the thickness of your stock, you must decide which method to use. A bearing riding on a thin edge of your stock can result in most of the bit being above the wood, which will prevent the bit from complete bowling You could extend the feathered edge to the full depth of the material if you ride the bearing on a guide clamped or taped on.
the raised panels are styled in a bevelled manner (see Freud 99-101 491, 511, 513 The 515th, 99th, and 100th birthdays 516), while the moldings fit the Shaker style.
If you plan on using a bearing of this size, be aware that RPMS could get misaligned & go out of alignment It's as if they are jerking you around.
The rpms would be too hot due to the large bit because it would not be good to have a larger bit.
Selected User Reviews For Freud 3-1/2" (Dia.) Raised Panel Bit with 1/2" Shank (99-518)
This is one of several quadra-style As with the rest of the bits that I own, these pieces produce a very smooth cut that only requires a small amount of sanding to remove machine marks. When you are using a table, mine is used Two 2's mount the unit. - 25 HP variable speed (Necessary to run large diameter bits at low RPMs! - The cleanest cuts can be achieved by using multiple passes (this is true for all bits where a lot of material needs to I've got a free tip for you. that can be exchanged with aftermarket bearings as well, if smaller diameter is required. Earlier this year, I used this method to undercut the top of a media center cabinet (photo).
The plunge router has a variable speed of 5 hp. The guide bearing and post were removed so that a special plate or fence could be put in place to better control router movement. A bit less than 10,000 rpm was used for two passes per 14' board. It would be best to make three passes to reduce edge splinters.
Due to the closure of my company three years ago, I took a three-year break The city's woodworkers have brought their hobby to the streets for a year. In this process, I learned that it is essential to have tools that consistently perform well if one is to meet the quality and production standards of picky The last few weeks have been filled with a lot of custom raised panel doors resulting from building built-ins. With this bit, the end grain of the panel is smoothed with little effort, and the surface is cut with little effort. My first two experiences have been with poplar (cuts that feel like butter) and maple, and I'm extremely pleased with the results. Some of my tools for the moment are hobby grade, but I am working my way up to industrial The router I'm using is a Dewalt 619 plunge router, mounted on a home made router table with a simple drop-in router It is mounted in a This bit, and many others, is designed for machines with adjustable lifts, so my only complaint is that the shaft is about 1/2 inch The bit is shorter than I would like. This is not in the bit's hands, but for some of you hobbyists out there, it may be of importance to consider.
As of November 2013, I have used this bit to make raised panels in walnut, on top of a JessEm Excel table, and to support a Porter-Cable T-180 router table. This motor cable will fit 7518 cables. There are lots of lacy shavings left from the bit because it's so sharp I could not see any tear in the fabric The grain of the wood will always show even when cutting against it. There is a great deal of weight and substantiality to this piece. With the speed turned down to 10,000 rpm, a bit of this size is traveling more than 100 mph even at the slowest speeds. If you cut 8" x 8" elliptical blanks, make sure your work is well secured (I used a vacuum clamp carriage) and make a series of light cuts.
There are no issues with the system. Blades on this bit are huge, and I feel the bit is heavy enough to handle any job I throw at it and leaves a super smooth finish as a result. The best way to reap the benefits of this is to use a powerful router! Your average router will be slowed down by this.
A very large router bit of such high quality and functionality is very useful to me. To create a fully raised panel, you need to make three cuts that become deeper and deeper It is particularly true of woods with harder grains. The texture should be smooth and burnt- There is minimal sanding required for this free final cut.
It has a curly cherry checkered surface that I have run many feet of without tearing it One reason why I didn't give it five stars is that I usually get a light line or burning along the overlap between the small cutter and There may be an issue because wood that is touched twice as often as wood that is only cut by the main cutter is touching twice as often. Even though it is very light, I am able to sand it out, but I would much rather it did not exist.
Related Products For Freud 3-1/2" (Dia.) Raised Panel Bit with 1/2" Shank (99-518)
