Freud 1-11/16" (Dia.) Premier Adjustable Rail & Stile Bit with 1/2" Shank (Round Over Bead) (99-763)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
You can, but you'll need a router table for this bit. When the router is in handheld mode, it cannot be configured.
There is a lot of adjustment in the set. The provided shims allow you to adjust the thickness of the tenon as needed. It is imperative to test to ensure that both parts of the mask have the same thickness first.
Selected User Reviews For Freud 1-11/16" (Dia.) Premier Adjustable Rail & Stile Bit with 1/2" Shank (Round Over Bead) (99-763)
Several years ago, when my wife asked me to make some cabinets for her laundry room, I bought this set. Since the ceilings are 9 feet high in that room, the hanging wall cabinets are 42 inches tall, too. Due to the weight of 40" solid hard maple raised panel doors, I was concerned about the strength of normal stub tenons. I used this set to make doors that have extended tenons which are set into mortises buried within the slots of the stiles, and the result is that the door frames are incredibly It is a great idea to design the two-in-one Making the extended tenons was made very easy using the two-piece rail bit. Additionally, I appreciate that the slot cutter on the stile bits is adjustable so that it can accommodate solid wood panels or plywood that is undersized. It's very sharp out of the box and it produces a professional finish Finished profile that does not need to be sanded. To be fair, however, this set requires very fine adjustment of router bit height inside the table in order to utilize it properly. Unfortunately, I don't have a router lift that can support such fine adjustments. If you do not have a router lift that you can easily adjust, it could be frustrating. The mortises when using this set were only possible because I had a hollow chisel mortiser, even though it is very simple to make extended tenons with this set. In the absence of that, making 1/4" mortises inside the stile slots would have been a considerable challenge.
In my experience, it is important to get used to how the setup steps work and what to use first. In the following youtube videos, you can see how to setup and use these Find it by searching for Freud rail & Freudian psychology The video "stile" is available via youtube. In order to accurately measure the shims, I used a digital caliper since they are measured in mm's rather than inches. Approximately 9/16" of the door panels are not Each is 5. 55") long, and is We are 96 of 32 (approximately I use a 70 millimeter tube). It seems that any wood material is no longer standard or consistent in measurements. With a bit of "cut and paste" the bits were adjusted Take the measurements) steps until the panels fit the frame as snugly as possible It was a pleasure working with Freud Tech Support (Mike), who provided me with the technical drawings of the bits and was very patient with me. It takes more than 35 years of old fashioned woodworking to get accustomed to visual aids. You can find these bits, as well as other rail & foot bits, on eBay. You will not be disappointed with Stile type, my fellow woodworkers.
I would have liked the thumbnail without the extra step, but I did not recognize that it was a Round over BEAD profile. I want to match existing doors without the extra step. As I have been using a Freud set for the past 25 years, I was hoping I would be able to get a new one for this project, but I guess I will have to use There is not even a replacement available here on Amazon for what I have, only the beads. * If this is the profile you are looking for, see our bits and price page!.
This set is my fourth rail and stile set. Since this is the best one out of all of them, I am not sure why! There is no tearout with this set as it is smoothly cut. What I like best about this set is that it only requires you to set the fence once instead of setting it every time. All of my other sets require me to set the fence for every bit, so I can tell that this one saves me quite a bit of time.
The issue was beyond the scope of the project At Home Depot, you can find undersized plywood. A quarter inch of birch was 3/16 inch instead of 7/32 inch. There is too much space between the panels. I took my micrometer in to find that it was only Home Depot (versus Lowes) that had that degree of undersizing. Took me a while to realize that HD was not representative. Guess I should have considered micing it first. My search did not reveal any with a size as large as 7/32, the rest This is "201". It's not possible to get 7 out of 32. Putting 219 into the equation, it would be 5. A 56mm camera Three sixteenths of an inch is There are four rows and eight columns in 1875. There are 76 millimeters in it. 0. It is considered to be the "standard". It seems like the 201 is functioning well. There is no such indication in the instructions or video that you should double check the.
It worked perfectly for the extended tenons on a router table since it was very cleanly cut. The best way to prepare for using this product is to watch Freud's online video. In addition, there is a microchip Increasing the router fence, as explained by Incra, will speed up the extended tenon work by a significant amount.
A very high quality product. Item sent for review was a brand new boxed item. As a precaution, I would advise you to be wary of sellers who send me used components packaged as new parts. It has so far held up great with over 100 feet of wood routed and they are still going strong. The next time I buy, I will.
The product delivers what it says. The process was not documented on the website, but there are videos on YouTube explaining how it works. Glass panels do not come with good instructions on how to make them.
Related Products For Freud 1-11/16" (Dia.) Premier Adjustable Rail & Stile Bit with 1/2" Shank (Round Over Bead) (99-763)
