Hromee Air Tank Manifold Tool with Fill Port, Aluminum Shut Off Safety Valve and Relief Bypass 1/2" NPT Tank x 1/4" NPT Hose x 1/8" NPT Gauge for Air Compressor Portable Carry Tank
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Drain out the water and adjust the pressure switch if there is a drain valve. You must check the tank's pressure rating to determine whether increasing the pressure is safe.
The size of a half-inch by a inch. Approximately 1 inch
In fact, it does not.
In neither the brass nor the gauge does it say. Despite the fact that I did not use it, the hose says China. The parts were all made in China, so I'm guessing that everything was made in China.
Selected User Reviews For Hromee Air Tank Manifold Tool with Fill Port, Aluminum Shut Off Safety Valve and Relief Bypass 1/2" NPT Tank x 1/4" NPT Hose x 1/8" NPT Gauge for Air Compressor Portable Carry Tank
The purchase took place on October 10, A kit has been installed on an air tank today, and tires have been tried out. There was a collapse of the chuck! There is too little threading between the retaining ring for the poppet valve or the valve body. The one or the other. I blew both rings and valves out at the same time. There seems to be something wrong with Chuck They can be crimped on a There is no replacement for There were three stars for the valve and gauge, but what should we do now? Getting a new hose with a good chuck is necessary. Why do you want to charge half of the product value? Neither Amazon nor eBay will accept it back. The decision has already been made. This is a total bummer on all counts. If I had been under pressure, parts might have blown back into my face. You are being warned of a hazardous situation!.
The plastic on/off wheel on my old one was broken and I needed to replace it. That's why this one is good because of the aluminum front and rear wheels. Overpressure relief valve leaked at 125 psi, and it is open as far as 115 psi if you touch the valve even a little bit, which you always do since your finger will be right next to the valve when you turn the on/off wheel. I just placed a thick rubber band over the valve and now it's functioning well. Even if you accidentally touch it, the valve will remain closed at 125 psi.
This shouldn't be considered a negative review, that's my mistake. The reason I got this was because it's not cheaply made It is time to refill the valve.
I bought this manifold in order to have a shutoff option for my older tank. When the air runs out, this relief is so sensitive that it's easy to trigger, and this defeats the shutoff feature in the machine. It doesn't feel like a 130 PSI relief, but more like a 110 PSI relief.
He found the gauge to be broken and the hose not crimped to the chuck from the factory when he received it. The hose was repaired, a new gauge was purchased and installed, but the factory-installed hose continued to leak. Your money is worth saving.
You don't even need to screw the red turn knob all the way down to get pressure (don't do it There is no need to worry about quality. Installation is a fairly straightforward process that will take you a couple good-sized wrenches and a lot of time (i. e. You're in shape). He is healthy.
A simple process of installation is required. Compared to the original polyvinyl valve, this aluminum one makes a huge difference. The only thing I have concern with is how long the inner seal will last, but other than that I am very satisfied with it.