DeWalt D55155 Compressor Replacement Regulator Repair Kitm
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The reports that it would work convinced me to order it. On my Porter Cable c2002, the program did not work. The money was a waste. Although the seller didn't say she would, she never implied she In my comment, I was basing my opinion on other comments. P is not clear to me if he - The regulator C used over the life of the product changed. In the end, I disabled that regulator and bought and attached another on the other side. The total cost was about $20.
That is not the case.
A 5140160-based product is available from Porter Cable For C2002 Type 5 and later, the regulator knob is 28 mm. The part that you are referring to does not belong to us.
My 2002, D55155, was originally used as the basis for this purchase. We couldn't find a product that matched your search
Selected User Reviews For DeWalt D55155 Compressor Replacement Regulator Repair Kitm
Pictures included to help you decide. While the parts look good, they did not fit my compressor, a Delta D55155. At least two different regulators appear to have been used by Delta I have attached the name plate of my compressor with every serial number listed along with a photo of the packaged repair kit listed here on Amazon and what the regulator parts actually look like. Before ordering, it would be best to take your regulator apart and check the internals. You can do it easily. Remove the pressure regulation knob by unscrewing it as far as it will go, and then get a big wrench and unscrew it from the compressor panel by removing the plastic hex base. Keep an eye on the pieces and remember their placement. It leaks less frequently now, although I'm still trying to find the right repair kit for it. I cleaned up my internals and lubricated them, and they now leak less frequently. I wish you the best of.
The kit was delivered today, and I put it together within a few minutes. It was the easiest thing in the world. I know I didn't need all the parts, but I decided to install them anyway just because I wanted as much new as I got it in 2 days. Shipping was fast. Make sure the package is well sealed. I wanted to confirm that it did exactly that others have said it does fit my Porter Cable C2002 Type 3. I was able to pick up a compressor from a friend who scraps. It had been leaking air for some time because the plastic piece in the regulator was broken. Therefore, I now have a working pancake compressor that holds air and the regulator is also working. So don't worry about my tools getting blown out. In addition to that, I tried the "hack" suggested on the tubes and it didn't work all that well for me, I couldn't regulate the air ect. It is worth $20 to fix it correctly.
On my dewalt d55146 air compressor this morning, I was able to fix the leak in the regulator. For the life of me, I couldn't find the model number and type of Those who could not find the number plate did not have to look far mine was hand written in yellow paint beneath the tank on the black part of the motor and was marked "#3. ". It took me a while to find it because there was so much dust on.
A YouTube video helped me fix the compressor regulator on my Porter Cable compressor in about 30 minutes. In order to remove a plastic cover, a T10 Torx wrench (super-mountainous, like a Philips screwdriver with a tiny tip) is needed, and an 11/16 open-ended screwdriver is required to remove the plastic cover. It does not have a double-ended wrench, pliers, or anything else that can be used to remove it The work area needs to be lit and magnetically receptive Holds small parts at the bottom of the dish.
Unfortunately, all you have to replace in the regulator kit is the black plastic piece, when the only piece of the kit that has gone bad is the black plastic piece. 99% of the time, that is the case. The item should not cost more than $1 to make, and should not sell for more than $3. If things are fair, the item should not cost more than $1. In spite of this, since the kit must be purchased, you might as well replace the whole thing. The cost of them is already paid for. A picture is basically the only instruction in the form of a detailed order of the parts This is a relatively simple fix as long as you follow the instructions. It's also a good idea to get a T-shirt To remove the screw that holds the regulator cover in place, you will need a 10 torx screwdriver.
It is a gamble that I bought the kit to try to fix a broken regulator diaphragm on a compressor. The compressor installed well, and I now have output air, but it won't maintain a pre-set pressure. As such, I would have to say that it does not work in a Porter-style environment This cable C2002 has a diameter of 0. 5 meter Three types, six types The pancake compressor has a capacity of one gallon. There were actually 20 dollars in it. Instead of $50, you will pay $00 for the parts kit. For an inexpensive (and very noisy) compressor you can buy brand new for $100 instead of $300 or more for the entire regulator assembly. The time is around 00. A 60-day trial is already in my possession The stationary will hold one gallon and the 20-gallon will hold two gallons Normally it costs me about $40 for a gallon "silent" portable, but I could have gotten this one for free by fixing it up! Obviously, hoarding is an issue for me.
I am writing to you as a potential buyer I found this product to be exactly what it said it would be. It took me less than 30 minutes to install using the YouTube video. There was no need for it to be repaired since the repair shop wanted $100 just to look at I used the part on my 150# Porter and Cable compressor with no problems. We are now able to run the compressor. In case there is a problem, I have ordered another one. Here is some information that may help you make a decision. Jaywin, With Heart.
The tool did not work right out of the box for my Dewalt D55168 Type 7, but with a little adjustment to the main piston, it appears to work fine. There are no issues with the components other than the large black piston (main component). As a result, it led to a binding in the bore of the regulator bonnet, as it was oversized by several thou. As a fix, I decided to take out the piston ring made of nitrile and put it in my drill (to act as a lathe) and then sand the piston down to the right diameter using 120g sandpaper. All works as expected after doing this. The product does not immediately work out of the box, as described. Unfortunately, we have had to remove a couple stars for that reason.
Related Products For DeWalt D55155 Compressor Replacement Regulator Repair Kitm
