Pneumatic Staple (Metal)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The one I bought online from Walmart was advertised with case and featured a picture of case in the ad, but it didn't come with The package came in a box made of cardboard.
This is Arrow Fastener 508M1 Genuine T50 Monel Rustproof 1/2-Inch, this is the mark I used for the fastener I was able to staple inch staples with this gun seamlessly.
Yes, you need an air compressor for this.
If an Arrow Fastener product proves to be defective in material or workmanship under normal use during the warranty period, Arrow Fastener will repair it or replace it FOR FREE. To ensure better performance, use genuine Arrow® staples and nails whenever possible. If repair is not possible, Arrow Fastener may replace the product or refund the purchase price in exchange for the return of the defective product. The 800 number A 776-9 It is "2228"
Selected User Reviews For Pneumatic Staple (Metal)
Staplers such as this one have a lot to recommend them. This is a very easy-to-use tool. The stapler has never jammed and Arrow staples are always
Another definite downside is that the safety paw is too big, and making it very difficult to see where the staples will go. The Porter-Cable stapler is another type of pneumatic stapler The Cable's US58 1/4 inch The 22-inch television A gauge of It should be noted that Crown Upholstery Stapler is not affected by this design defect, but at about 3x the price.
On the plus side, the cost of this Arrow stapler is about the minimum price for any upholstery work to get done. My take on the matter is as follows When you are going to need a pneumatic stapler on a regular basis, this is an inefficient device. However, if you will only need to use it occasionally, then the cost makes sense.
One of the best little guns out there! It does its job without jamming for hours on end. Whenever you use the screen, just give it a little oil daily and you will find that the expense is repaid many times over. T50 staples do a great job at holding the cloth to the screen because the staple head is wide. A lot of fun to play with!.
If it is optimized for performance, it is effective. Assembled it with Arrow Fastener 508M1 T50 Monel staples that I was able to purchase also on Amazon, then pulled the trigger. I have nothing to say. A hissing sound can only be heard when air is escaping. How the he11 does one do. Upon closer inspection and experimentation, it was discovered that by pushing the trigger mechanism "all the way against" the pistol body, the internals of the pistol were not engaged. A single trigger press was sufficient to release air while not enough to activate the air. It was fortunate that the trigger pin is held in place by a rubber washer, so I had the ability to remove the washer and bend the tab about an eighth of an inch. The problem was solved by turning the safety mechanism three-eighths of an inch more towards the safety mechanism. The fix caused the program to perform very well afterward.
I can no longer use a manual stapler for extended periods because my hands do not tolerate it. It was clear to me I needed something less stressful when I had to replace 16 4 x 8 panels of screening. The pneumatic stapler was purchased with the hope that it would be useful. I love it! There is a slight weight difference between this and manual staplers that I have used, but the balance and grip make up for it. This is a very comfortable chair! Starting at 60 pounds, I began to lose weight. The 70 has not ripped the screening and has been working fine. I would highly recommend the Arrow pneumatic to anyone. It saved me a lot of time and saved my hands.
Two sizes of the T50 brand have been used, both from the arrow and stanley companies. I never had a problem with it jamming. Neither safety nor security were a problem for me. Reading the instructions is all you need to do to load it. It was very important to give the air tool oil a good soak before and after using it.
It is great to have a gun like this!
**I work as the Technical Director for a theatre, where I do everything from construction to finishing work. The upholstery fabric that we used as wall paper 2 productions ago was used as upholstery fabric. I had to cut the fabric to size, and then put down a glue/water mixture, staple, stretch and wrap, and finally staple and staple the fabric down to the floor. The gun I have allowed me to use is why I was able to finish in the allotted amount of time. In the morning, as I took off towards the stars, I listened to some music. An accident that resulted in a fire or miss There are times when there is a fire. It happens on occasion, and you simply need to be aware of it. I don't know what causes it, but it happens. In the event that it is necessary for me to buy it again, I won't be discouraged. This is my favorite little feature - the way it loads and the really smart because, since you have to load from the bottom, you can turn the gun upside down, and pull the trigger to open the reload slot, all with one hand.
In order to reupholster six dining room chairs, I used the stapler. In addition to the piping, a dust cover was included. There are probably about 1,000 staples in my bag. Everything went according to plan with the stapler. As I take on more projects, I'm likely to do so. You can go to the tank right away if you have a tank compressor and a light-weight hose. Keep it in top shape by adding a few drops of oil every couple of hours.