Arrow T59 Wiring Tacker
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I have several Arrow staplers (I own several of them) that require a reasonably strong grip, yes. In order to get a good grip on it, you'll need a reasonably large hand. There is nothing general about women here - I wouldn't want to generalize at all. For your own assessment, you'll need to do some research.
I definitely wouldn't recommend it.
Cables with a diameter of 3/8 are used with this. There is plastic insulating the staples so any collateral damage should be prevented.
As of now, I have not heard of any staples that are hardened enough to penetrate cement. It is almost impossible for staples to hold on to sheetrock. I just wanted to let you know. In the case of a staple that promises to work, the injection spring on the T59 could not be strong enough to send the staple into the concrete. While you can use cement nails with a different applicator or even epoxy, it's very difficult to find any type of staple gun that can work for the purpose you are trying to accomplish. Here's some advice I hope is helpful *br>
Selected User Reviews For Arrow T59 Wiring Tacker
Google Chrome was used to run a search for best staple guns, where I read a review site that revealed this product. It said that it had great reviews and for some reason it displayed this as one. The cable fastener gun is exceptionally well built, I agree with you. Wires are held down with staples that have plastic ends that let them slide along a surface, but do not sear flat on a This stapler does not staple in deeply or as strongly as a staple gun since there is a gap where the wire should be. The fingers of my hands can easily pull these away from wood. While I own it now and will keep it as an addition to my tool kit, I had thought I would get a staple gun instead. My next purchase was an Arrow staple gun, which is also a wonderful stapler. Just in case any of you don't understand what the difference is like me, I just wanted to clarify for you.
It's hard to staple solid pine with a staple gun. (See It's a great staple gun. I have an Arrow bare wire stapler. Then I could hammer them home with a tack hammer and drive them home. I am tempted to think that if this is a repeat, it may be easier to simply grasp the staples with your needle nose pliers and drive them in with a hammer instead of using a stapler.
I find this tool to be very solid and it works perfectly. Using it for networking throughout my house, I never had a problem. I used the "clear" color in the image.
It takes me about 45 minutes to run about 200 feet of cat6 cable down the stairs along the baseboard with this stapler. Aside from a few staples getting jammed into the wood, I run about 60 staples through the stapler. This cable (clear plastic on white wire) looks great. I only have a minor complaint that using the device requires a lot of strength, which makes it difficult to use in tight places. Other than that, it is totally worthwhile (and quite enjoyable as well).
There is pain involved in using this tool. There is a lot of width to the handle, and it is tough to compress it. After a few hundred staples, the pain is unbearable to a point where the hand is damaged even with a glove. You can feel the impact on the hand when the compression is done. I am sorry, but I am unaware of any better options. Why this tool hasn't evolved with the times is a mystery to me. What makes the Duo Fast CS5000 different from a professional grade stapler like the 1/2" crown staplers is its smooth trigger. I cannot understand why there is no newer professional grade stapler with a smooth trigger like the 1/2" crown staplers. This will probably be my go-to until something better comes along.
Due to the relatively thin nature of CAT6 cable (and not want to crush or impede the A stapler like this is too good to be true. The staple gun is very sturdy, easy to load, takes only a modest amount of pressure to staple, and has a great notch/guide for the cable (after working all day running Ethernet in our attic, shorting the cable with a staple would have been a hassle). It should be noted that the insulated staples have an additional height to them, so the staples may not sit perfectly flat against the cable.
The applications worked perfectly and there were no errors. You can be sure this Arrow product is of exceptional quality and is very well crafted. Researchers and developers spent overtime on each of the clips that go into this one, so that they can be installed under different circumstances with spots-on solutions. I turned it on and had no problems at all. There is no other item more effective at the moment and I cannot recommend this highly enough. I personally do not have any complaints about this. If you need something installed and are concerned about wires shorting out, then this is the ideal product This investment is well worth it. A stapler made by Arrow from 35 years ago still sits in my office. There can be no Arrow in you.
Staplers such as this one make it easy to install and secure coaxial cable. This cable fence secures cables without pinching them, and it is so easy to install. It appears that I would have needed a super grip to drive the staples into the wood, but I was pleasantly surprised at how easily I was able to trigger the staples. By incorporating the cable tract into the gun, it ensures that you do not drive a metal staple into the This is a great tool to have.