HOZOE Chamfer Plane for Wood,Woodworking Hand Planer for Quick Edge Planing and radian Corner Plane Trimming,Four siaeTypes of Cutter Heads,Woodworking Tools for Professional Woodworkers and Beginners
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Yes, my dear customer, the size is 1/4", 3/16", 1/8" radius, 45 degree chamfer, and you are free to replace it as needed. It is possible to remove and polish the cutter head.
Good day, my valued client. Sharp and long-lasting resistant, disassembleable, and polishable If the blade is dull, it can be disassembled and polished. To prevent loss, each cutter head has a storage box. As a result, no additional cutter heads are required.
I wrapped a suitable sized drill bit's shaft in fine wet and dry sandpaper.
Dear Customer, the 45-inch width of the 45-inch width of the 45-inch width of the 45-inch The blade's angle is zero degrees. 4inch, If you are a beginner or are using this product for the first time, we recommend that you use the product to gradually increase the depth of the planing angle from shallow to deep, without stopping during the angle planing, so that the surface of the wood after you plan the edge is smoother.
Selected User Reviews For HOZOE Chamfer Plane for Wood,Woodworking Hand Planer for Quick Edge Planing and radian Corner Plane Trimming,Four siaeTypes of Cutter Heads,Woodworking Tools for Professional Woodworkers and Beginners
I was very interested in getting one of these because I was unable to order one from WoodPeckers Onetime Tool due to a scheduling conflict. This does not meet my expectations in terms of quality. On this piece of Cherry, I used the 45, which was already installed, and the knife was able to skim the surface without digging in and ripping a chunk of wood out. Second, the wood is painted black because it is painted when you apply pressure to keep the tool cut. br>br>I cannot recommend purchasing this product because the quality is unusable. After using this to finish the edge, I don't want to sand down paint that I didn't want there to begin with. It is preferable to use a router.
It didn't result in a smooth chamfer. It ripped the crap out of the mahogany box I put it in.
Garbage from China. Because the blades are too long, you can only remove a large amount of wood with them. The blades are also not particularly sharp, resulting in a choppy edge. With a pocket knife, I can do a better job freehanding. Buy American.
I tried it on a piece of pine as a test, and the paint rubs off, leaving wide steaks of bright red enamel paint on the wood. It appears to be nonferrous metal that has been painted with a cheap enamel paint that easily rubs off. After sanding the paint off and wiping away the paint dust with a damp cloth, then buffing with a little machine oil, all of the test pieces I've tried now have dark marks that look like pencil lead. Even after the tenth piece, the marks are still visible. This is a very low-quality item that is not worth purchasing.
I didn't want to bring a router to the job site because it didn't have external power, so I bought this tool reluctantly. It's essentially a hand planer with a curved edge blade. On hard woods or woods with weak grain, it works surprisingly well. To round off exposed edges on sized construction timber, I used it. Some of the edges were splintered, causing the chamber planer to catch and tear them. The chamber planer had to be turned in the direction of the splinter. The blade was firmly held in place by the adjustment screw, which allowed me to adjust the cut depth in small increments to manage the splintered edges. This purchase has made me extremely happy.
I used to trim edges with my router table all of the time. However, because the router table is so heavy to transport from the garage, it is not required for some small projects such as bird houses. This is a good option because it includes a portable edge trimmer and allows you to quickly complete tasks.
Because the blades move around in the slot and are very dull, the cuts are uneven.
The plane's body is made of metal, giving it enough weight and feel to function properly. It has four blades for one chamfer and three round over blades that are simple to change and set up. It worked fine right out of the box without being sharpened, but sharpening the blades is recommended to make getting professional results even easier.