Globe Electric 44636 Amalfi Outdoor Wall Sconce, Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Because you're liked by it? 2) Check that the bulb is seated securely in the socket and that all wiring is intact. There may also be a problem with the bulb.
Without a doubt. A good quality, durable product
Four inches
There are several ways to measure the size of a
Selected User Reviews For Globe Electric 44636 Amalfi Outdoor Wall Sconce, Black
Since the cost was so low, my expectations were pretty low. The plastic was cheap and I expected a lot. The problem was that I was mistaken. A metal and glass light bulb is actually used in this light. Although I am concerned about how thin the wiring (light/bulb part) is at the connection to the frame, so far it is working well. In addition to being larger than I expected, the light is more intense. It has only been a week since I installed the lights It's been a challenging month, but so far everything's working out great.
Unlike most lights, this one was literally installed in five minutes or less. As a tip, here are some steps Install the upper glass and metal enclosure after removing the lower glass and metal enclosure. As the top part of the lamp is very light, it can be balanced on a ladder or against your shoulder while the three electrical wires are attached with one hand. There is nothing cheap about this lamp. It's solid, looks fine, and feels much more expensive than its real price. Also, unlike what some of the other reviewers stated, it hangs straight up and down. It is highly recommended that you buy this porch light. The letter P. * As far as I can tell, this was a new lamp, but I opened the box and it was actually used, in excellent condition, so I kept Amazon seems to be doing this a lot more often, is it just me?.
Our garage is located directly in front of the pillars. I love the way they look! I've never seen him have a hard time setting up lights, according to him. It took him less than 15 minutes to install them. The LED Edison bulbs that we purchased for them are LEDs. There is only one negative to this product, which is that to replace the bulbs, you do need to remove the glass with a screwdriver. The LED bulb, on the other hand, will hopefully not burn out.
My backyard is brighter now, and these sconces are really affordable. However, when it comes to installing, it is a bit of a hassle! A few instructions are included, but most don't exist. Before you install, there is just a safety warning that you should turn off your breaker before continuing. A diagram showing the black and white wires included is also provided. In addition, they do not mention the "other" copper grounding wire. If you are building a new home, you can probably use this extra cable, but my house was built in 1998, and it was not provided with a connection for this extra cable. I had no idea what to do with it, so I was left wondering what to do. In response to my investigations and advice from my friends, I clipped and capped the wire. It is my hope that this will not cause my house to burn down!
I was unable to use the mounting bracket provided with my outlet box, so I had to go to the store and purchase another style. Although I give the overall quality and affordability of this light a perfect A+ (if used with LED Edison Bulbs), installation of the first one was extremely difficult. As for the installation of the 2nd and 3rd, hopefully that goes smoothly too.
They are very reasonable in price for this type of vintage style exterior light housing. Due to a few lackluster reviews you may be on the fence about purchasing. These are well worth every penny, nickel and dime.
I do not get that cheap feeling from them nor did I encounter any discrepancies in terms of tilt or crookedness when they were As a whole, I am glad I purchased them. There is no doubt in my mind that this product deserves.
The sconce is quite nice to look at. There is no way, however, for it to fit standard junction boxes. My pancake box actually fits inside of a pancake. There was still some adjustment to be made with a dremil and I needed to caulk heavily around the perimeter. Trimming it out will be my next step. This will only work for people who have a junction box that rests in their siding and does not extend from it.
Therefore, you pay for what you get. It's an inexpensive option, and they look great at a distance. But when you get close to them, you can clearly see how cheap they are. Such as how the bulb socket isn't exactly centered, so the bulbs always look like they're tilted one way or the other. Moreover, since the back plate is thin sheet metal, the lantern light does not hang perfectly parallel with the wall, and it sags somewhat. bend it up, you can see a bending in the base as if the support piece is about to break. They look good, so I'll keep them, but if I had to do it all over again I probably would not buy these and would spend a little bit more money for something better built and higher quality. I think these look like something you'd find on a house that's been To make it look good in photos, they decided to go with the cheapest, prettiest part they could find.
The light is very well made Glass is beautiful and the shade and other parts are sturdy. Initially, I bought just one for the back of the house, but was soon going to buy another two for the front once I saw how well they were made. In their appearance, they are rustic, which fits perfectly with the style of my house, which is a "farm ranch. ".