Henxlco AC 110V - 220V TO DC 12V Regulated Transformer Switch Power Supply Driver Adapter For CCTV camera Security System LED Strip Light (50A)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Power cords are not provided with this device.
The power these devices gives me runs several devices. It is simple to block off the power supplies by placing a distribution block. Use two of them, one for positive and one for negative. Get a generator with four ports and make sure to use the proper gauge when feeding the blocks, according to the devices you are running. Among the sites with the blocs are Amazon, eBay, and even Google. The 12v dist block can be found by searching for it.
As far as I'm concerned, I've never used any of these chargers as a charger, I've just used them to power communications equipment and The experts do a good job at it. Providing two-way HR
It is noted on the supply what Wattage the supply is rated for. An example would be From 600 to With a mid number of 600, the power rating is indicated.
Selected User Reviews For Henxlco AC 110V - 220V TO DC 12V Regulated Transformer Switch Power Supply Driver Adapter For CCTV camera Security System LED Strip Light (50A)
A wide range of adjustment is available It is a 02-volt battery. It outputs a clean image. Quite a bit of silence. The reason I bought this product was to power an audio amp that was maxing out my 30 amp supply's capacitors. The price of this thing was really cheap, and it does more than expected. This pot allows you to easily set the constant voltage using a 0. It is made from precision materials that have a low cost. The resolution of the video is 02V. The voltage sag was much less than 0 when I tested this supply at 35 amps. You've got a really good switching supply for a cheapo. However, the fan does operate continuously at one speed and is not very quiet. Despite its price, it's a 5 star if it lasts for a few years or if it is intermittently used.
I purchased this for use with a solid state linear amplifier for amateur radio. We were able to adjust output from 15 Although I was able to detect a small amount of RF noise generated by the supply in my receiver, the supply still does not provide 2 volts as needed. As an artist, I am not a fan of the fact that it does not include an on/off switch, and with a 50 amp supply, the terminals are too small to accept the 10 gauge wire that should be used at that level of power. Crimp on ring terminals were necessary for the 10 ga wire and I had to file the wire sides down to fit the terminals. A 50 amp product must have wider terminal spacing and bigger terminals!.
It claims there's a guarantee but I have no idea how to contact them.
Everything worked the way it was supposed.
The light bar is for my basement's police light bar and I purchased this to run it. I like how it works.
This unit powers my 300 watt ham radio just fine and there is no noise in my radio at all.
It gave me a burn feeling the first few times I used it, but it has now disappeared.
It is of good.