Eapele Undermount Sink Repair Kit, Sink Brackets for Quick and Easy Installation for Fallen Sink Support
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The length is four long and the short is one.
Five and eighteenths of an inch. This is a very sturdy and easy to install product.
It may be as much as 150 lbs total, since each of them is approximately 120 lbs
In fact, yes. There is about a half inch difference.
Selected User Reviews For Eapele Undermount Sink Repair Kit, Sink Brackets for Quick and Easy Installation for Fallen Sink Support
If you want different screws, get them. Since I rarely write reviews, I felt this one was worth one due to the hassle I had to deal with. During the process of replacing my undermounted sink, the previous owner did not drill into the granite countertop to use clips. Therefore, I bought these brackets. In addition, the previous sink was subject to periodic falling off because it was "jurry rigged" with plywood. As a last resort, I found these brackets to be an ideal alternative after I lost all hope with my own clips. Currently, they are holding up just fine, but we shall see how they will endure over time (hopefully the brackets are Although, my review is primarily for those who may be considering purchasing it, it also serves as precaution for those considering This solution works, but you will need to purchase a set of screws measuring 5/8". All the ones I received with it had either broken, bent, or been As far as I know, it wasn't my drill or my technique because I had practiced the move beforehand To avoid this, we drilled holes in the plywood of the cabinets. The bottom line These screws are inferior to good screws, and if you purchase them, buy a set of better Even if brackets fail to work, they will still do their intended job.
In what way? Is all you need to be bracketed is In the past, I've read about people whose sinks dropped after a couple of years because they weren't glued. I found what I needed in these brackets. It will be easy to attach the sink, since they support a sink that is 10 inches deep while still giving access to the mounting plate on the inside of the cabinet. After the plumber installed the mounts, he was blown away by them and will highly recommend them to his other clients.
I was pleased to receive these sink supports when I replaced the undermount metal sink in my kitchen. They are very adjustable, so they are perfect for tight spaces. As these arms extend into the sink bowl from under the lip, the mount is down below it. The only thing I would have preferred are 1/2" screws instead of the 5/8" ones (more than enough). It is not common for cabinet walls to be 5/8 in. thick or thicker. Rather than expand the screws further, I just glued 1/4" 3"x3" blocks on the inside of the cabinet where I installed the support arms to match the screw length. If I had gotten 1/2 inch screws, this installation may have been possible however, I wanted to use five-eighths instead for a more specific mount.
These were purchased to support a massive stainless steel sink under mount to granite counters. It was the old mounts that failed and these work just fine. In addition to replacing the supplied #8 * 3/4" phillips head wood screws with sheet metal screws (same size) with hex caps, I also replaced the supplied #8* 3/4" wood screws. My sockets were able to drive the screws in easier with this.
It's pretty easy to Drilled two holes marked on the mark. Two screws were attached, followed by holes that were drilled and two screws securing the piece. Around sink top, apply silicone and tighten in an even and gentle manner. Considering silicon took 24 hours to dry, it seems very solid after that period. This is a reliable service that I'd recommend and use again if the sink fell again.
Installing it is not the easiest thing to do. I found these to be effective. Yet you need to be aware of the fact that you must eliminate as much slack as possible. A sink that falls from the counter is a problem. Before you secure the 2 sidewalls, make sure that they are as level as possible. In terms of tightening the installation, little needs to be done. The screws included in the set are not the best.
It has been a great day. Hence, our kitchen sink has been holding up perfectly for the past 8 months.
I am glad you invented that. Installation of a granite counter top under the sink is a must. It is a great repair, or good way to keep your sink You can install it by watching YouTube videos.