KOHLER K-393-N4-2BZ Devonshire Bathroom Sink Faucet, One Size, Oil-Rubbed Bronze

Plastic Off Stops Keep your money in your wallet. This valve complements my half bath's all-bright-brass fixtures perfectly. But after seven and a half months, I'm not so pleased with myself. I bought a KOHLER K- 394- Widespread Lavatory Faucet by PB Devonshire. on the 3rd of October, 2016, from Amazon Prime. It was installed on a Kohler Pedestal sink to replace a similar non-Kohler sink. The rusted out Kohler faucet. It looks fantastic and performed admirably up until about a month ago. The next day, after having several dinner guests, I noticed that the cold water valve was still turning on and off correctly, moving about 45 degrees. To stop the flow of water, however, you must turn the hot water valve 90 degrees. My plumbing contractor said I'd have to order the part from Kohler and that the stop is made of plastic, and that one of the guests may have overturned it and broken it. To stop the flow of hot water, the handle is now pressed against the back wall, which looks awful.

Braylee Bolton

| Aug 27, 2021

This light fixture is absolutely stunning! I looked and looked for the right fixture, and after seeing it in person at a store, I passed it up a few times. I was concerned that it appeared to be a little out of date and outdated. I made a snap decision to put these in both bathrooms we were remodeling at the same time (yes, we must be nuts to do two at the same time!!) after thinking about it and looking at every fixture known to man. I put them on top of a cream-colored quartzite counter. vanity. Our home is traditional in style, with a cottage feel to it. They appear to be fantastic. I would choose them again because they are both elegant and comfortable, and they do not appear to be outdated! Oh, and I almost forgot to mention- Others had problems getting spots off after installation, according to what I read. I had the same problem, so I used pledge multi-surface cleaner and rubbed and rubbed until they were almost spot-free. Then I slathered regular pledge all over the place. They look fantastic, and the pledge ensures that they are protected from future blemishes. (I learned this trick from a Sears appliance department saleswoman who said she used Pledge on all the SS refrigerators to prevent people from spotting them!.

Mack Patterson

| Feb 14, 2021

The chrome finish on the original faucet had corroded in less than ten years. br>br> On the plus side: 1)I'm glad Kohler still makes a Devonshire style faucet, because it allowed us to match the rest of our hardware. 2) It took our plumber less than an hour to install it, and it looks nice. br>br>On the negative side, and the reason I am not giving it five stars, is that: 1). A Kohler faucet, which cost well over $100 in 2004, should have lasted at least 20 years. I had very old Kohler hardware in a previous home and it had never corroded, so I chose Kohler for our remodel. I was taken aback when I discovered corroded spots that had penetrated the metal completely. I take great pride in my home and have never abused the faucet. 2) I deducted a star because the water pressure from this new faucet is significantly lower than that of the 2004 Devonshire faucet. To adequately rinse soap from my hands, I need to run the water for a longer time. If a low-cost option is available, The pressure aerator was intended to save water, but given how long it takes me to rinse my hands, I'm not convinced it works. br>br>I've included a photo of the original faucet's corrosion as well as a video showing how to replace it. The force of the water.

Soren Trujillo

| Nov 25, 2021

On a Thursday night, I ordered a Kohler bathroom faucet from Amazon and was pleased to receive it by mid-week. Saturday was a special day. When I opened the package, I was dismayed to discover that the parts were not wrapped or sealed in plastic. On closer inspection, I discovered rust and bluish deposits on the tube leading to the cold water handle, as well as the appearance of bent metal. The hot water handle was in good condition, with no rust visible. I expected to receive a used faucet after paying for a new one. Kohler should be ashamed of itself for selling substandard products and failing to maintain quality control. I chose a higher-priced Kohler faucet because I wanted a high-quality product, but this is a huge letdown. I'm going to return it and get something else.

Charleigh Myers

| Jan 08, 2021

I replaced the 30 year old original fixtures in my master bath with two of these. Per faucet, two new supply lines were also required (I used the HIGHCRAFT CNCT1671-1). Stainless Steel 16 Inch 2 Braided Faucet Connector With 1/2'' x 3/8'' Brass Nut). The original hot and cold valves under the sink should be replaced because they are designed for copper pipe, not the multiple supply lines mentioned above. SharkBite 23036LFA4 Compression Angle Stop Valve, 1/2 Inch x 3/8 Inch, Push-In, 1/2 Inch x 3/8 Inch, Push-In, Compression Angle Stop Valve, 1/2 Inch x 3/8 Inch, Push-In, Compression Angle 4 Pack of Connect. You can unsubscribe at any time. Solder the old valves or, if there is enough pipe, simply cut them off and push the Shark Bites onto the pipe, no soldering required. The only other suggestion is to apply teflon tape to the end of the supplied SS drain pipe that screws into the drain's stopper control portion. I had to add the teflon tape after the initial installation because mine leaked without it. br>br>I love the way these faucets look and feel.

Aubrielle Rollins

| Aug 09, 2021