SparkPod Adjustable Shower Arm Extension Brass with High Polished Colors (11 inch, Chrome)

I received it on a Wednesday, after a long and trying day at the office. The Coronavirus blues had me down too, so I thought the shower would be the best thing to do as soon as I came in. Could you tell me what this is? This box is filled with something. It was the shower kit that I had ordered from Amazon. I opened it and found it. I don't care! As much as I loved the idea of having a shower, I was too tired to do this. On my way out of the shower room, I glanced at the shower head's box photo As for the extension arm and the filter housing, I did the same. I used to install many shower heads during my time, and I knew that I could install this in 10 minutes since I had done it before. My challenge was now accepting the challenge, which is what I would do. Spark Pod provided the high pressure "rain" shower head, the 11" extension arm, and the filter housing with cartridge with which I have purchased all three items. The instructions came with complete sets of seals and strainers, as well as color photo boxes wrapped in a clear plastic bag. There was no obvious problem with any of the packaging. I removed the old shower head and cleaned the Teflon plumbers tape off the shower stem that protrudes from the wall after removing the old shower head. It may be necessary to use a crescent wrench to remove it if it's very It took me less than two minutes to complete. Immediately after the old one was thrown away, the new one was installed. Afterward, I would install Teflon plumber's tape on all exposed threads of the filter housing once it was attached to the shower stem. All of this was done by hand without the aid of any It was easy to thread the housing on to the threads coated with plumber's tape. If there is a rubber seal, make sure it is there The ring in the stem of the housing. At the next connection point of the extension arm, which will attach to the housing you already have installed for the filter, you should also add a filter screen. The whole process of attaching these parts to the new part took me under 3 minutes In case you were wondering, the housing should already have a filter cartridge. With a few twists of the hand, the housing can be unscrewed, revealing the hollow interior. Finally, you need to attach the extension arm to the shower head. As before, make sure you have covered the exposed threads with plumber's tape. Don't forget to check if each connection point is connected to an optical fiber It ringed. In addition, where the arm connects with the shower head, another mesh filter screen will be present. I could not use any tools for this. It took me another two minutes. Check to see if there is water flowing after turning on the shower to see if there are leaks. After turning on the shower, check every connection for tightness. experienced a very slight leak at the filter housing on my first check, but I was able to eliminate it by giving it a little more twist by hand. Five days after the leak, there is still no leak. You will have to remove a restricter ring from the shower head if you want to make the water flow faster. To remove the rubber o-rings, you will have to remove the rubber o-rings Open the connection on the open end to create a ring. The task can be accomplished with a set of tweezers without much difficulty. You should be able to remove the plastic restricter ring just by turning the open connection end down. Ideally, it should come out easily with the tweezers if it's stuck in the threads. The flow from the shower head will increase with the removal of this ring. Having said that, I am not a plumber, and I was able to install this 3-piece kit with minimal assistance. It will take you about 10 minutes to install the shower set. My guess is that most would feel it is worth the effort if it took them 20-30 minutes I will be back in thirty Have you taken a shower yet? In comparison to the old shower head, it's like getting into a bath under a waterfall. I have forgotten about wanting a removable head attached to a hose because of the added adjustment range from the extension arm. With the filter, I should be able to improve both the quality of my shower and reduce potential toxins. were in need of an inexpensive shower head, it's as simple as this It is easy to install and gives a very good shower. I recommend it highly.

Luna Wall

| Nov 28, 2020

I am just as satisfied as I was with the previous product and decided to increase the rating to five stars because the quality and durability remain the same. As well as a different filter, I attached a heavy, two-head shower that can be detached. All the additional weight is still able to be held by the arm without any issues. It is not unusual for me to have to raise the arm a little bit higher every couple of months due to my habit of moving the heads. This item will likely continue to be of benefit to me for many years to come! Happy to be here! The item has been used for more than a month in order to test its durability and function. In addition to the shower filter that is connected to the other end, there is also a heavy Kohler double showerhead that has a detachable hose. So far, I have been satisfied with the functionality of this shower system. I am pleased to report that the shower arm held its weight no problem, despite its size and weight. A simple and easy way to adjust the angle or height of the screen is to rise and lower it. Hopefully I will be able to provide you with an update soon about the quality and functionality of our site. My experience with this shower arm has led me to recommend it. In the event of any changes to the product, I will let you know.

Maya Hammond

| Sep 16, 2020

I would definitely recommend it. My shower head finally raised at just the right height without making me cry. We recently bought a new home and it was obvious the builder was not as tall as me A very good design has been used for this device, which is well made. If you have a problem with pipe dope, use that instead of Teflon tape, just as a standard These metal fittings are of good quality and have good dimensioning, sealing tightly with the included standard hose. Seals with type gaskets (thread seals may not be necessary). It fits both ends of a 1/2" NPT standard pipe it screws right into the old one Here is The- There is a male end and an adapter for a male and a female end on the wall pipe. Although I'm not able to comment how well it would work with heavy shower heads (high cantilevered load), the angular clamps seem sturdy. The installation process is simple. am not sure about the durability since I just purchased it, but I have confidence that it will last a very long time. I order the It is accurate to the color displayed on Amazon.

Augustine Lawrence

| Sep 04, 2020

Heavy weight can be handled without slipping on it, as it is super durable. It was the right choice for me since I wanted a heavy-duty, 3-foot extension that could hold the weight of my 16" wide, 6lb heavy rainfall showerhead. Due to the fact that I live in an NYC apartment, overhead installation is out. Due to the weight of the extension, the only solution was to get an arm extender that could handle the weight and I decided to give this thing a try after reading the reviews and it turns out it outshines its competitors. This is not an overly heavy tool, but it is certainly a heavy one. As soon as I twist the handles tightly, the door virtually locks In addition, when I turn the shower on, the huge showerhead fills with water, adding even more weight, but this thing takes it all in stride. This is exactly what you are looking for, so don't waste your time looking elsewhere.

Rowan Booth

| Dec 07, 2020

A friend recommended this to me on Amazon, so I decided to try it. I would say a reasonable price. Came with everything as shown (except the shower head) just had to do with Lastly, there is the tepflon (is that how you spell it) tape that isn't visible in the video. It was a nice touch to include that. To continue with the shower arm, here are the steps The stainless steel feel makes it feel well-built. The pipe clamps were easy to install and easy to adjust. I had no problems screwing them onto the pipe. In order to achieve a desired angle, you have to tighten the locking knobs. I recommend this program, it works as advertised. Please refer to the images and videos if you need more information. You'll enjoy it!.

Aydin TALBOT

| Jan 14, 2021