DECOLAV 1839-24-SSA Sacha Solid Surface Rectangular Undermount Lavatory Sink, 24-Inch, White
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
One and one sixteenth inch wide is the lip
This was the time between 1839 and 1845 Two faucets will fit on the SSA, but two faucets will not fit on the 1839-style For installation in his/her home, an SSA (48") is more appropriate.
have just installed this sink, which we just received. It is a larger size. Despite this, the larger sink is described as having an interior dimension of 33 inches -- it stands 35 1/2 inches tall. Obviously, I am not able to assist you with the 24 inch version, but I assume the sides are similar.
Selected User Reviews For DECOLAV 1839-24-SSA Sacha Solid Surface Rectangular Undermount Lavatory Sink, 24-Inch, White
Finished installing the 24in cabinet in a 30in enclosure. Although it might be narrow at the width, it wouldn't be as bad as I originally thought. In this case, the undermount clips were not used but instead aluminum channels and angles were used to support the entire lip. In any case, it was very tight between the front and back of the cabinet for standard depth. It was barely possible to fit the minimum counter top strip in front of the sink and to fit the faucet in front of the backsplash when the sink was Since it must be set back only 1/4in from the sink cutout, the base of the faucet has to be set back 1/8in. With the cabinet pulled out an additional 5/8in from the back wall, this is how far the cabinet could be pushed out. Using wall mounted faucets with a cabinet of standard depth is recommended otherwise use a cabinet of greater depth. We like the sink, however, the bottom is relatively flat, like what you'd find on A minimal amount of pitch is sufficient for the water to drain, but it leaves small puddles. There are instances when extra water is required to wash dirty dishes down the sink. For a bathroom, this is usually not an issue. It would be nice if the pitch was a little higher. We installed two single hole faucets left and right angled in so it looks like the old fashioned sinks with separate hot and cold faucets, but we get hot and cold out of each. The Decolav drain with pushbutton release was used.
I had to purchase a squeegee in order to properly funnel the.
It's a beautiful large sink that made up my custom vanity, but pay attention to its overall size since it's larger by about 4 inches than the specifications indicate. Our countertop and vanity makers with manufacturer templates have a lot of problems as a result of this. As a result, we had to reduce the space between the faucet and backsplash and shave some of the vanity. For getting to places in the sink that are hard to reach, I bought a faucet that can extend out like a hose. There would be too many faucets on this sink if there were two.