Moen R8736D3GBN Ultima 36-Inch Designer Bathroom Grab Bar with Curl Grip, Brushed Nickel
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There are mounting screws included, but you may need other hardware to mount it on, depending on what you need to fit it to. Studs are much stronger than blocks, if fastened right, and look much more attractive
I am delighted you are interested in Moen products. Thank you. Specifically designed hardware is included with our grab bars so that they can be fastened to drywall and to studs. To install the tile properly, it is necessary to find specific screws for the installation, as well as a drill bit specific to the You may want to contact your local plumbing supply store to find out what's available. Call us if you need help at 1 Dial 888- The numbers 289-300 The number 66636 Please reach us Monday through Friday between 9 a.m. and 5 p.m. The time is 30 pm Eastern Standard
A 36" diameter wheel is at the center The mounting is placed at the center. Once the endcaps are in place, the total measurement from outside to the inside is A little more than 39" from the outside. Here is a translation that may be helpful.
I am delighted you are interested in Moen products. Thank you. This Moen Ultima 36-inch faucet is part of the R8736D3GCH series The designer bathroom grab bar with curl grip is supplied with six #10 wood screws that are used for installation through We have three on each side. If you have any questions, you can call us at 800-489-7663 The numbers 289-300 Business hours are 9 am to 5 pm, Monday through Friday. The alarm clock goes off at 00 a.m. The meeting starts at 30 p.m. The time zone Monday through Friday is Eastern Time.
Selected User Reviews For Moen R8736D3GBN Ultima 36-Inch Designer Bathroom Grab Bar with Curl Grip, Brushed Nickel
There is nothing we don't like about As far as installation is concerned The included screws should be discarded because they are substandard and the metal is too soft to drive I recommend buying some 2 1/2" or 3" heavy duty course thread decking screws along with the appropriate driver bit at your local hardware store. In the pre- Test the height and slope by drilling a pilot hole and temporarily mounting the device with short removable screws. You know the studs when the paper is right, so when you know where to put the studs Once a mount is permanently attached, it will not move. You can keep the decorative cover in place by applying some clear RTV or Silastic under its lip if it does not seem to snap on properly. The center of a 36-inch grab bar is weaker than those of a shorter bar because it has a longer length. You can use it to catch yourself and keep your balance. You can grasp it at the end if you have to place a lot of pressure on it. A lifetime of memories should be made.
All the way around the bar where it attaches to the covers where it is bolted to the wall, there is a 1/3 inch gap. Our shower is fitted with this device. Apparently it isn't finished, and I'm concerned water will collect and cause a bad odor to form in the covers at some point. I'll mention it again just in case it's useful to anyone, the installer put it in about 4 feet above the tub floor, and it's a little too high to be useful in catching your weight if you slip Getting out of the tub can be difficult as well because it is too high. It would be hung 6 inches to a foot lower if I had to do it again.
The bronze finish on this handrail was quite attractive. It is sturdy, installs easily, and looks lovely. The walls can be mounted onto wood or through drywall straight into studs In the case that installation on a hollow wall is required Our unit works and looks great, and we are extremely satisfied with it.
Everything you're looking for is here. A 30 degree angle is formed by two studs. I have oiled brass looking fixtures that are 10 years old that match the color. Despite its light color, the picture makes it look a heck of a lot paler than it really The color on mine is the correct one. The only thing you need to do is screw it into the studs. I needed longer and heavier duty stainless screws because the wall of the shower stands about an inch off the ground. I injected some minimally expanding foam between the acrylic wall to fill the space and keep it from bending.
I installed it in the newly tiling shower and my mother is delighted. It is easy to install but be cautious, as you must drill into the tiles and the grab bar must be anchored into studs. There are several videos on YouTube that illustrate how to drill through tile without breaking It is up to you which method you choose, so pick one you feel most comfortable with. It's very important to take your time when it comes to finding a stud in the shower, but fortunately, I had access to the back side of the wall and had access to the stud finder, so I was able to find where the studs were.
My parents' bathroom has just been upgraded with a new bar. Despite being very thin, the bar is sturdy. It was installed very quickly by the person who did it. Despite the fact that it looked as if the picture on Amazon showed a gold tint, it is brushed nickel. Besides the width, I like the length (about 3 feet. I was able to fit in perfectly.
Because of the finish on the Moen faucet, the quality, and the style, I chose it. This product was built to a very high standard! Not too heavy, but solid and sturdy. When screwing a grab bar into a stud, the toughest part is to make sure it is solid. It's not the same yanking on a drywall anchor all day long in the bathroom (and even at home) when people will be yanking on it all day! For example, if your television is 16 inches wide, you could If you use a 36" bar, you may have difficulty mounting studs at the center. There are still many holes on the mounting plate, and it includes heavy-duty locking screws Screws and washers that are heavy duty! The Moen hardware includes three screws to attach to a stud, and Moen recommends hitting the stud with at least three screws. It is my hope that this The *br*-.
For the Moen quality, this is a great price. The in-house method was not used My studs were too tall for ceiling mounts, so I mounted them on the wall. It feels nice to have finger holds, but I think they take away some of the space from As well as a towel bar, I use this as a bath towel rack. I expected to find that space for thicker bath You will be able to wear them, but it won't be so easy to slip them down. I am very satisfied with the overall outcome.