B&C Eagle A312X131HD/33 Offset Round Head 3-1/2-Inch x .131 x 33 Degree Hot Dip Galvanized Smooth Shank Paper Tape Collated Framing Nails (500 per box)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I definitely agree! There is a Milwaukee 2745 available for me to use Those between 20 and 30 I have used these with a degree framing nailer and they work well.
These nails were used both in a 30 degree nail gun and a 33 degree nail gun.
It appeared to work as I used them with my Bostitch F33PT while it was still in the box. It seems to me that you won't have a problem using these in a 35-degree
It is true these are 33 degree offset round head nails, but you should not experience any issues if you use them. I have used them a few times in my Bostitch F33PT nailer and they have worked perfectly!
Selected User Reviews For B&C Eagle A312X131HD/33 Offset Round Head 3-1/2-Inch x .131 x 33 Degree Hot Dip Galvanized Smooth Shank Paper Tape Collated Framing Nails (500 per box)
In truth, these are clipped head nails. They have been described as offset heads but are in fact full head nails. The Numax SFR3490 34° clipped head nail gun I also just bought from Amazon also works well with these. At the time of this posting, I have used only 1 1/2 clips but they have worked just fine with no issues. Some nails did not drive all the way in when toe nailing. It is natural for toenails to break but that is how they are Nails should also be nailed that way and the nail gun should be used, not nails themselves. Nail into old and new (and beyond) We had two 2x6 and two 2*4 stick pine trees from 20 yrs ago.
Very good value compared to most other clipped-trees. There were 15%- 20% of nails on my head when I looked at them An increase of 30%.
I used these nails with my DEWALT DCN692B 20V MAX Cordless 30° Paper Collated Framing Nailer and they worked quite well.
Nails - what is there to say? Whether they work in your gun or not is a matter of personal preference. In order to repurchase clipped head nails for my Dewalt D51822 that I recently rebuilt, I discovered that clipped head nails are no longer available. After giving to my wife for a birthday present, I immediately went to the internet to check if my framing nailer was now nothing else There is a chance that my old gun could be used with offset round head nails. From reading the review site, I was surprised to find that SO MANY people were in the same boat as me, and that other clipped head nailer owners had similar success. Here is what you have to know It has been a successful career for me too. This business and this business My nail gun was saved from the grave, and I did not have to invest in a new one because of C Eagle offset nails.
My Banks 30 works flawlessly with this bag The Harbor Freight 34 degree framing nailer can be found at most hardware stores.
It is certain that these half-baked ideas will not end well You cannot use them with the DEWALT DW325PT 33 Degree Paper Tape Framing Nailer that is offered on this site from CPO since that nailer is advertised as a 33 degree nailer while what arrived was a 30 degree nailer. It is not possible to use 25" nails. It is only a slight difference, but enough to prevent the larger nails from working. In spite of the mismatch, the 2 3/8 nails seem to work fine.
A cordless Dewalt worked just as it was supposed to.
They run through my Dewalt DCN692 very smoothly. Nails that are good. As well as that, they hold well. Be sure you can hit your target. We are pulling 3 cards. It's hard work to get five inches out.
Related Products For B&C Eagle A312X131HD/33 Offset Round Head 3-1/2-Inch x .131 x 33 Degree Hot Dip Galvanized Smooth Shank Paper Tape Collated Framing Nails (500 per box)
