PC Products Dispensing Gun PPM-300 for PC-Super Epoxy Adhesive Paste, 300ml, 991503
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It changes color from green to yellow.
If fabrication procedures are followed, it should work. In order to ensure product performance and warranty, Dupont and other solid surface manufacturers sell proprietary joining and fabrication products. Without training, some companies will not even sell their products.
It's safe for glass, tile, and masonry, according to the label. As a result, I expect it to happen. I recommend that you purchase it and test it in an inconspicuous location. You have nothing to lose if you purchase it. It also works well with a variety of other things. If I may suggest something, I use JB Weld Kwik Weld when I need the strongest bond possible. In addition to everything else that epoxy does, it's fantastic for metal.
It worked perfectly to repair the broken top of a porceline toilet tank when I used it once. I assume you're applying it to the rough interior of porceline, as I did, rather than the smooth exterior of porceline; I've never tried it on the smooth exterior of porceline, but as for smooth surfaces, I can say that it works on glass, unless the glass reaches a temperature of 120oF or higher, at which point the repair tends to break if the repair is supporting a lateral weight of a pound or more at a distance of more than a couple TIP: PC- At room temperature or above, SuperEpoxy squeezes out of the gun much easier than it does at lower temperatures.
Selected User Reviews For PC Products Dispensing Gun PPM-300 for PC-Super Epoxy Adhesive Paste, 300ml, 991503
No fumes. To hold replacement iron stair balusters (330 of them) into the wood base and railings, I needed a strong epoxy. This is fantastic. The fact that it doesn't drip or run, which is especially important where the tops of the balusters are inserted into the bottom of the rail, means you don't have to rush with fine adjustments. With acetone and some elbow grease, excess can be cleaned up. Unlike the old wood ones that were nailed and wood glued, there is no budge and the end result does not move at all. br>br>Excellent product; I'll keep a few spare cartridges on hand in case of unexpected repairs.
Finally, a well-made and functional epoxy gun! I had to epoxy each wrought iron spindle into place after installing three attractive custom railings in my home. The epoxy gun was made of plastic, and after three or four applications, it broke. Big-box stores lacked a comparable applicator, and their epoxy systems were both overpriced and ineffective. As a result, I placed another order for additional epoxy guns - All of them were pricey, made of plastic, and easily broken. After a year or so of stewing, I went back to look for a workable epoxy application system, and this is what I found! It is extremely effective! Two of the three railings were completed in less than an hour after taping off the spindles. The guidelines are straightforward - If you apply too much pressure, the epoxy tube(s) may rupture. The epoxy is opaque, thick enough to cover the tops of spindles without running, and of excellent quality. I had plenty of time to carefully empty four tubes of epoxy before they became too thick to dispense, and the railing was rock solid after 24 hours. Although this system appears to be costly, the other epoxy systems would have cost me up to ten times as much and taken me days longer to complete. When applying epoxy, the last thing you want to discover is that your applicator is too flimsy for the job. Other metal epoxy applicators may work just as well and be less expensive (I haven't tried them), but they can't be better. In addition, the plastic epoxy applicators are a waste of money and time. I would rather work on my projects than on my tools. I'll keep using the PC Products epoxy applicator for my home projects, and I'd recommend it to hobbyists, craftsmen, and DIYers who need to apply epoxy consistently, quickly, and accurately.
This epoxy is a thick gel that is ideal for vertical applications or areas where you don't want the epoxy to run out. It has a thick viscosity, so if you tool it instead of pouring it out, it will keep its shape. It won't seep into and fill small gaps like most epoxies because it's so thick. When you need a non-drip epoxy, this is the one to use. If it matters to you, the cured color is a milky off white/creamy color. What's really cool about it is that it doesn't have that strong epoxy smell; instead, it's very subtle, so you can use it indoors without stinking up the place.
I'm a ceramic artist, and I needed epoxy to repair a crack in the foot of a large porcelain bowl. PC-Products PC-Products PC-Products PC-Product Two-pack of Super Epoxy Adhesive Paste Translucent 46644, part 4 oz in two jars Although the split was not structural, it needed to be filled for aesthetic reasons. It was a slam-dunk success! The only drawback is that it is all white!! There is a misunderstanding! I applied it to a variety of items in the hopes that it would dry clear. It's white when thick, so I had to scrape it off with a razor and a dremel on some ceramics where I needed clear. Waterproof Translucent Paste was written on the container, which looked identical to the one on Amazon. The good news is that it performs admirably as a paste epoxy.
Professionals, do-it-yourselfers, woodworkers, craftsmen, and hobbyists will all benefit from this book. The epoxy is not runny, and it comes at a great price. Because it's a little thicker than mayonnaise, it's ideal for vertical and overhead applications. It's not clear; it's opaque, and it dries as such. It does exactly what it says on the tin, and it's completely free of charge. When fully cured, it is runny, takes a reasonable amount of time to work with, and is extremely solid. Each package contains two nozzles, but I have used only one nozzle per epoxy cartridge on my projects so far. PC Products (PC-) was the brand I used. To finish my interior custom railing project (wrought iron secured into cherry railing), I used Super Epoxy to secure the balusters and spindles (wrought iron). Super strong, super safe, and it looks great! PC Products is an excellent choice if you need this type of epoxy for your projects; I wish I had discovered them a few years ago.
I've used expoxy to seal plastic and other items in the past at work. After reading all of the positive reviews, I decided to place an order. It does exactly what it says on the tin. The most important thing is to make sure your surfaces are clean and to wait for it to dry completely. I was able to avoid purchasing a new laptop by doing all of the above.
Although the epoxy is extremely durable, the applicator is the best part. It self-mixes, so you won't have to try to mix and jam the epoxy wherever you need it with a scrap piece of wood. It's easy to use, and you can get exactly the amount of epoxy you need, exactly where you want it, without making a mess or getting it on your hands. You'll want to group your tasks together so you can complete as much as possible at once. You have the option of repeating the process. When you're finished, replace the cap to save any remaining epoxy in the tube; however, the mixing tips cannot be reused. When you remove the mixing tip, you'll also waste any epoxy that's left inside.
It's a little thick, so it's difficult to flow. I intended to use it as an eyelet on a fishing rod, but it was too thick to achieve the smooth finish I desired. It is not clear when dry, but it does have a blue tinge. Although the description claims that it dries clear, this is not the case. I like how long it takes to set up, but I wouldn't use it again for this purpose. I was expecting it to flow and lay flat, but it didn't. As a result, if you're looking for a smooth finish, this brand might disappoint you.
Related Products For PC Products Dispensing Gun PPM-300 for PC-Super Epoxy Adhesive Paste, 300ml, 991503
