Fluke 117/323 Kit Multimeter and Clamp Meter Electricians Combo Kit

My profession is that of an electrician, which means that I specialize in troubleshooting and fixing things other people cannot. The test equipment I use for my business is the way I make It is amazing how effective the 117 is. There is no doubt that it's my favorite all-purpose multi-tasking app Measured in meters. Neither is it an 87V or one of the higher-end models, but it is a reliable meter that provides fast results. I tested it with my benchtop HP meter and found the system to be significantly more accurate and precise than its rated accuracy. Honestly, I cannot think of anything negative to say about it, aside from the fact the capacitance feature only goes up to 1000uF and the screen is difficult to read from more than 30 degrees above it (for some reason it's not easier from below). This feature of the 117 is fantastically useful since low impedance voltages are readily available. If the multimeter does not come with a low-power output, I would not buy it There is a voltage function named Z. It is very quick and accurate to set up the autorange and continuity. It is an excellent quality set of leads that is included. An advantage of this shroud is that it can be adjusted to fit different CAT ratings. There are a few bad things As a toy, the 323 is pretty much what it is. Despite the case's low quality, it's slippery and feels cheap. As for the rotary selector switch, it works, but the detent is not as firm as I would like. It has no particularly useful features other than the fact that it acts as As far as we know, it lacks a min/max feature There is a severe deficit here. When start-up current is measured by a clamp meter, one of the most common uses is to measure inrush current. A back light is not present, and there is no way to add a strap for hanging. There is no need for a 323 while the truck is in motion. It is much more common for me to use a Klein clamp meter than a Thus, you are saving a significant amount of money with this kit, given that you are getting the 323 for a large discount. It might be worthwhile to buy this kit if you don't have another clamp meter or want one as a spare. The 117 falls into the category of good quality when it comes to the magnetic hanger. Magnet with a very high strength and a long There is a cheap case included with the camera, but that should come as no surprise. I believe it is of at least some padding and of sufficient size for a couple pairs of leads, two meters, and a.

Kara Whitehead

| Nov 06, 2020

It is very un- You can use it as a contractor or homeowner! When I made the purchase, I thought this was a pretty good deal for me. I had been using a 87v for years before it and assumed it would be the same quality as all of Fluke's It works in LoZ mode, too). A huge arc flash occurred while measuring voltage in this mode, resulting in the circuit I was testing being tripped. There is a great deal of danger in this. A GFCI on the circuit tripped instead of something far worse because the resistance in the meter appears to be too low. My return window had expired by 3 days, so I called Amazon to request that they replace or repair this for me. You should use this right away if you purchase it, to make sure that all the features function properly. My mistake was to wait 32 days after purchase to use this meter, assuming it would work well and be safe to use.

Damian Herman

| Apr 17, 2021

As far as I could tell, the kit I received was Day one of testing produced a readout of the multimeter. Not thinking to check my clamp meter, I didn't do so. The assumption was that everything would be fine. Later, I'm on a job and I need to determine what the current draw on a circuit is. Zip, zero, zilch, (0) are the readings on my new clamp meter. This is my first time using it, and it does not However, the deadline for my return had already passed. It's a good idea to have ALL of your equipment checked/tested Now is not the time to.

Crystal McGrath

| Dec 22, 2020

My confidence increases because I know I have a fluke to fall back on. There will never be another time when I turn to anything besides a fluke. The meter served its purpose well and was not another one. In 2008, after eight years of daily electrical work, I finally was struck by lightning. My first lesson in electrical safety came from a 277v backfed line that shorted to ground on an industrial light circuit. It was enough to teach me a lesson that day to use another meter when you don't have a fluke handy. When I separated the four wires in the junction box, the difference in potential was enough to make me think twice. I never got any voltage in the circuit, not even a ground in fact, but it was still live, and I could have identified it with this meter by checking the voltage detection built in.

Amaia Crosby

| May 10, 2021

Using the multimeter every day is a daily routine for me. The tests have detente shrouds that cover the tips, so the tips are protected - its got all the features I want. A high level of I've been a maintenance technician / service tech for more than 30 years, but I'm not an electrician. This kit is great for everyday use due to its clamp meter, which appears to be accurate with amperage readings. The set is so great that I just bought one to keep at home (my company bought one for its own use). Buying cheap crap in the past didn't last more than 3 months for me, so I'm pretty sure it was a fluke. In the past, I bought the cheap crap and I couldn't make it It's missing a temperature probe from this kit (I bought it used, like new, on Amazon) which is a bit of a disappointment. may have used the one in my work kit once or twice, so it wouldn't be such a big deal. Nevertheless, when you buy something, you expect it to come with everything it's supposed to have. The overall set is very nice and I'm very happy to have it for use at home One of the Fluke meters that was given to me was about 30 years old. My middle brother just handed it down to a youngster who's just learning how to swim. This was a great excuse for me to buy the set!.

Lia GOUGH

| Mar 01, 2021

I can do all I need to do electrical and electronic repairs with this kit. It is great to work with magnetic hangers when you are With this device, hands are free and the security is very high. When I am testing certain door security contacts, the ohm setting on the 323 meter is used since I need more than just a simple open/closed reading, ohms are important to me. This clamp has a dual function that allows you to measure voltage and amps. In my case, I use the 323 meter instead of the ohm setting because it has more capabilities.

Callie Barber

| Apr 04, 2021

A cheap meters that I bought in the beginning cost me *$35, a mistake that I made from the very Their functionality or accuracy is not near as good as those of these fluke meters, let alone their The decision to send the non working meter after two days and to pick up this baby was a great one, even though my pocket told me otherwise. But you get what you pay for in the end!.

Prince PICKERING

| May 22, 2021